This example demonstrates BLE GATT throughput for PSoC 6 MCU. GATT throughput is calculated on both server and client devices.

The code example demonstrates how to view the CapSense debug data and tune the CapSense sensors over BLE communication using CapSense Tuner GUI in PSoC 6 devices.

The code example demonstrates how to view the CapSense debug data and tune the CapSense sensors over BLE communication using CapSense Tuner GUI.

This code example demonstrates the implementation of a simple Bluetooth LE Immediate Alert Service (IAS)-based Find Me Profile (FMP) using PSoC 6 MCU with Bluetooth Low Energy Connectivity.

This code example demonstrates the implementation of a BLE Battery Service using PSoC 6 MCU with Bluetooth Low Energy Connectivity (PSoC 6 BLE). This code example implements a GATT Server with the Battery Service and Device Information Service BLE standards. This code example uses FreeRTOS.

This example demonstrates how to use the protection units to isolate the CM0+ from CM4.

This example demonstrates the fault handling functionality of PSoC 6 MCU using Peripheral Driver Library (PDL) System Library (SysLib) and ModusToolbox integrated development environment (IDE).

This example uses a SPI resource and Smart I/O in PSoC 6 MCU to implement the Serial General Purpose Input/Output (SGPIO) Target interface, which is a four-signal bus defined in the SFF-8485 standard. Another SPI resource is used to implement the SGPIO Initiator, which drives the clock on the SGPIO bus.

This code example demonstrates how to interface PSoC 6 MCU with a BMI160 Motion Sensor over an I2C interface within a FreeRTOS task. This example reads raw motion data and estimates the orientation of the board.

mtb-example-lz4-demo

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

This example demonstrates the UART transmit and receive operation using DMA in PSoC 6 MCU.

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.

This example demonstrates how to transition PSoC 6 MCU to the following power modes - Low Power Active, Low Power Sleep, Ultra Low Power Active, Ultra Low Power Sleep, and Deep Sleep.

This example demonstrates how to configure and SPI and Smart I/O to implement the Inter-IC Sound (I2S) interface.

mtb-example-hal-posix-freertos

This example demonstrates the useof I2C (HAL) resource for PSoC6 MCU in Master mode with an EzI2C slave

This code example demonstrates generating a One-Time Password (OTP) using the True Random Number generation (TRNG) feature of PSoC 6 MCU cryptography block.

This example demonstrates the operation of the I2C (HAL) resource for PSoC 6 MCU in Slave mode using callbacks

This code example demonstrates the privacy features available to users in Bluetooth 5.0 and above using ModusToolbox™ software.