This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829.

This example demonstrates the use of I2C (HAL) resource for PSoC6 MCU in Master mode

This example demonstrates BLE GATT throughput for PSoC 6 MCU. GATT throughput is calculated on both server and client devices.

mtb-example-hal-posix-freertos

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

This example demonstrates the Watchdog Timer (WDT) in PSoC 6 MCU.

This code example demonstrates the privacy features available to users in Bluetooth 5.0 and above using ModusToolbox™ software.

mtb-example-lz4-demo

This example demonstrates the fault handling functionality of PSoC 6 MCU using Peripheral Driver Library (PDL) System Library (SysLib) and ModusToolbox integrated development environment (IDE).

This example demonstrates the use of SPI SCB (Serial Communication Block) resource for PSoC® 6 MCU in Master mode using DMA.

This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829, and AIROC™ Wi-Fi & Bluetooth® combo SoC devices.

This application demonstrates how to set up a 32-bit free-running counter using two 16-bit counters of the Multi-Counter Watchdog Timer (MCWDT). The application is implemented using LPTimer HAL APIs , which use a cascade of Counter 0 and Counter 1 in free-running mode.

This design implements a BLE FMP that consists of an IAS. FMP and IAS are BLE standard Profile and Service respectively, as defined by the Bluetooth SIG. The design uses LED to display the IAS alert level – no alert (LED OFF), mild alert (LED blinking), high alert (LED ON).

This example demonstrates the usage of CSD analog-to-digital converter (ADC) in PSoC 6 MCU.

This code example demonstrates the implementation of a simple BLE GAP Peripheral - GATT Client with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs

The code example demonstrates how to view the CapSense debug data and tune the CapSense sensors over BLE communication using CapSense Tuner GUI.

This example demonstrates how to configure a GPIO to generate an interrupt in PSoC 6 MCU.

This code example demonstrates using the CSD hardware-block-based current digital-to-analog converter (CSDIDAC) as a current source and a current sink.

This code example demonstrates the use of a SPI (HAL) resource in slave mode. The SPI slave is configured to receive command packets to control an user LED on the kit.