AVRDUDE is a utility to program AVR microcontrollers

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

Guide For Working With AVR Microcontrollers.

A minimal startingpoint to work with FreeRTOS on Arduino UNO using only cmake and avr-gcc (not using the arduino IDE)

tinsy-sam-jiggler is USB HID keyboard and mouse jiggler firmware for the TINSY-SAM devboard.

Peripheral drivers library for Microchip (Atmel) SAM3-SAM4 microcontroller family.

Target atsamd microcontrollers using Rust

A Toolbox companion for QMK Firmware

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

Clackety Keyboards Powered by Python

Arduino hardware package for ATmega8, ATmega48, ATmega88, ATmega168, ATmega328 and ATmega328PB

Передача показаний воды по Wi-Fi. Watermeter Wi-Fi transmitter.

AT28C Series EEPROM Programmer

A debug interface for AVR-based embedded systems development on GNU/Linux.

Sensors Testing Code

Minimum working example of USB audio on an Arduino Due (SAM3X)

Raspberry Pi EEPROM Programmer

An intelligent trash can made using Arduino that detects motion around him, automatic opens the lid and signals when it is fully filled and must be emptied. An infrared sensor is used for motion detection, a stepper motor for lifting the lid and an ultrasonic sensor for fully filled detection.

My MicroPython projects with ATSAMD21G18A

Peripheral drivers library for Microchip (Atmel) SAMD microcontroller family.