PaperoidPi

A thermal instant-camera based on Raspberry Pi and Paperang.

Installation

The installation script will update your Pi and install all the dependencies:

chmod u+x install.sh
sudo ./install.sh

Be sure to have your camera interface enabled:

sudo raspi-config

Config and run

Edit the start.py script to match your hardware configuration, then just:

sudo python3 start.py

Run at boot

To run your Paperoid at boot, add the following line to /etc/rc.local:

sudo python3 /home/pi/PaperoidPi/start.py &

To do

• Add a web interface to:
  • change camera settings;
  • view gallery;
• Improve logging.