This is a programable time lapse for a Go-Pro where tiles on the track deterands how it moves. The system can move in backward/forwards, rotate the camera and soon tilt the camera (when i get more time). It uses Lego train track as the track to guide it along and place programing tiles. The tiles are different colors which get a colour sensor reads and changes moving mode.
Currently there are 4 colours with 4 different modes. Green (also starting mode) is full travel speed with no other movements. Blue is start rotation of camera. Yellow is half the speed. Red is stop. More colours will be added soon. The wheels are held in place with 2 x 20mmxM3 screws and driven by a 28byj-48 stepper motor. The system can be run from a 9V battery but cannot last long with out being replaced.
The PCB can be purchased from https://tinkersprojects.com/product/time-lapse-controller/
New Parts will be added, Keep up to date by following:
- Project page -> http://tinkersprojects.com/project/programable-time-lapse/
- This Thing -> https://www.thingiverse.com/thing:2825424
- my Profile -> https://www.thingiverse.com/haybailes/about
Have a look at this and other projects that I have done: http://tinkersprojects.com/