Skip to content

Function Pack software: Examples that combine the usage of multiple X-NUCLEO boards

License

Notifications You must be signed in to change notification settings

stm32duino/FP_Examples

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

60 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

FP_Examples

This library provides several Function Packs that combine the usage of several X-NUCLEO boards together with a NUCLEO board.

Examples

There are several examples with the FP_Examples library.

  • NucleoCar: This application provides a funny example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE) with X-NUCLEO-IDB05A1, X-NUCLEO-IHM02A1 and X-NUCLEO-6180XA1 Expansion Boards. The application implements two operative modes. With the first mode the car can move using the main VL6180X sensor; the closer we put the hand on the sensor, the higher is the speed of the car. The VL6180X satellites instead are used to avoid the obstacles. With the second mode the car can be controlled via BTLE using a dedicated Android App. Also in this case the VL6180X satellites try to avoid the obstacles. In order to change the car mode, you can push the User Button of the Nucleo board.
  • GestureDirSwipeLed_53L0A1_LED61A1: This application provides a simple example of usage of a NUCLEO board (it was tested with NUCLEO-L476RG) with X-NUCLEO-53L0A1 and X-NUCLEO-LED61A1 Expansion Boards. The application allows to switch on/off a strip of LEDs keeping the hand on the 3 proximity sensors at least for 3 seconds. When the LEDs are switched on, the user can increase or decrease the intensity of the LEDs performing a swipe movement respectively from left to right and from right to left.
  • MemsMotorControl_IKS01A2_IHM02A1: This application provides a simple example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE) with X-NUCLEO-IKS01A2 and X-NUCLEO-IHM02A1 Expansion Boards. The application allows to run a motor clockwise or counter-clockwise rotating the stack of boards accordingly; the speed of motor increases when the angle of rotation increases as well.
  • BleSensors_SensiBLE: This application provides an example of usage of a SensiBLE board. The application uses BLE along with environmental and motion sensors (humidity, temperature, pressure, accelerometer, gyroscope). The user can connect an Android or IOS device with BlueNRG application to SensiBLE and see sensors data. The data are also printed to the serial port.
  • Flight1: This application provides an example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE, NUCLEO-L476RG, NUCLEO-L152RE) with X-NUCLEO-IKS01A2 or X-NUCLEO-IKS01A3, X-NUCLEO-IDB05A1 and X-NUCLEO-53L1A1 Expansion Boards. The application gather data from the sensor mounted and then communicates them via bluetooth to a suitable Android app (such as ST BLE Sensor). The data gathered include environmental data (temperature, pression, humidity), distance, gesture recognition (tap and directional swipe), acceleration (with accelerometer hardware events) and a gyroscope.
  • Flight1v2: This application provides an example of usage of a NUCLEO board (it was tested with a NUCLEO-F401RE and a NUCLEO-L476RG) with X-NUCLEO-IKS01A3, X-NUCLEO-IDB05A2, X-NUCLEO-BNRG2A1 and X-NUCLEO-53L1A1 Expansion Boards. The application gathers data from the sensors mounted and then communicates them via bluetooth to a suitable Android or iOS app (such as ST BLE Sensor). The data gathered include environmental data (temperature, pression, humidity), distance, gesture recognition (tap and directional swipe), acceleration (with accelerometer hardware events), a gyroscope and a magnetometer. In addition, 9x sensor fusion functionality for accurate orientation detection is also available. Note that unlike the Flight1 application, this one makes use of the STM32duinoBLE API instead of SPBTLE-RF, and does not support X-NUCLEO-IKS01A2 boards. In addition, an up-to-date version of the STM32duinoBLE library is required, as this application uses some of the newest features.
  • IKS01A3_S2LP_P2P_Demo: This application provides a simple example of usage of two NUCLEO boards (it was tested with NUCLEO-F401RE and NUCLEO-L053R8) with a X-NUCLEO-IKS01A3 and one among X-NUCLEO-S2868A1, X-NUCLEO-S2868A2 and X-NUCLEO-S2915A1. It shows how to send and receive all the sensor data provided by the X-NUCLEO-IKS01A3 between two NUCLEO boards connected each other through S2-LP based Expansion Boards; in order to send the sensor data you just need to push the button of the NUCLEO board; in order to see the received sensor data you just need to open a hyperterminal connected to the Virtual COM port of the Nucleo board; the LED of the NUCLEO board will blink after every successful transmission or reception.
  • X_NUCLEO_IKS02A1_Audio_Button: This application provides a simple example of recording audio from a X-NUCLEO-IKS02A1, converting from PDM to PCM, then saving it as a wave file to an SD Card.

Dependencies

The FP_Examples library requires the following STM32duino libraries (link to the source files):

Documentation

The datasheets of the several components are available at

About

Function Pack software: Examples that combine the usage of multiple X-NUCLEO boards

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Packages

No packages published