Skip to content

MakeCode package for the SparkFun Moto:Bit board - beta

Notifications You must be signed in to change notification settings

sparkfun/pxt-moto-bit

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

21 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Moto:bit

SparkFun Moto:bit

The package adds support for the moto:bit add-on board from SparkFun.

TODO: To use this package, go to https://pxt.microbit.org, click Add package and search for moto-bit.

~ hint

Not currently integrated into pxt. It must be manually added. This package is still under development and subject to changes.

~

Usage

The package adds support for the moto:bit add-on board from SparkFun.

Micro:bit Pins Used

The following micro:bit pins are used for analog and digital sensors, motor driving:

  • P0 -- Analog Input 0
  • P1 -- Analog Input 1
  • P2 -- Analog Input 2
  • P8 -- Digital Input/Output
  • P12 -- Digital Input/Output
  • P14 -- Digital Input/Output
  • P15 -- Servo Motor
  • P16 -- Servo Motor
  • P19 -- motor driver - SCL
  • P20 -- motor driver - SDA

Set Motor Speed

To set the speed and direction for a motor, place the |set motor| block. The block takes three parameters: motor select, direction, and speed.

  • The motor select must be either Left or Right
  • Direction must be either Forward or Reverse
  • Speed is an integer value between 0 and 100
motobit.setMotorSpeed(Motor.Left, MotorDirection.Forward, 50)

Invert Motor Directon

When a motor turns opposite to the direction that was declared, the invert block may be used. The block accepts two parameters: motor select, and a boolean variable. When the boolean is set to true, the motor direction is inverted so that Forward no longer causes the motor to spin in Reverse, but rather Forward.

  • The motor select must be either Left or Right
  • Invert must be either true or false
motobit.invert(Motor.Left, true)

Enabling Motors

Regardless of the set motor speed, before the motors will turn on the switch on moto:bit must be set to "Run Motors", and the enable motors command must be set to ON

  • Motor enable must be either On or Off.
motobit.enable(MotorPower.On)

Examples

Example: Receiving a packet of data over wireless

The following program reads a string to control the direction of two motors.

radio.onDataPacketReceived( ({ receivedNumber }) =>  {
    // Drive forward
    if (receivedNumber == 128) {
        led.plot(2, 0)
        motobit.setMotorSpeed(Motor.Left, MotorDirection.Forward, 50)
        motobit.setMotorSpeed(Motor.Right, MotorDirection.Forward, 50)
        motobit.enable(MotorPower.On)
    } else {
        led.unplot(2, 0)
    }
    // Turn left
    if (receivedNumber == 64) {
        led.plot(0, 2)
        motobit.setMotorSpeed(Motor.Left, MotorDirection.Reverse, 50)
        motobit.setMotorSpeed(Motor.Right, MotorDirection.Forward, 50)
        motobit.enable(MotorPower.On)
    } else {
        led.unplot(0, 2)
    }
    // Turn right
    if (receivedNumber == 32) {
        led.plot(4, 2)
        motobit.setMotorSpeed(Motor.Left, MotorDirection.Forward, 50)
        motobit.setMotorSpeed(Motor.Right, MotorDirection.Reverse, 50)
        motobit.enable(MotorPower.On)
    } else {
        led.unplot(4, 2)
    }
    // Drive in reverse
    if (receivedNumber == 16) {
        led.plot(2, 4)
        motobit.setMotorSpeed(Motor.Left, MotorDirection.Reverse, 50)
        motobit.setMotorSpeed(Motor.Right, MotorDirection.Reverse, 50)
        motobit.enable(MotorPower.On)
    } else {
        led.unplot(2, 4)
    }
    // Stop
    if (receivedNumber == 0) {
        motobit.enable(MotorPower.Off)
    }
})
radio.setGroup(13)

License

MIT

Supported targets

  • for PXT/microbit
motobit=github:sparkfun/pxt-moto-bit