Skip to content
/ potato Public

A simple RISC-V processor for use in FPGA designs.

License

Notifications You must be signed in to change notification settings

skordal/potato

Repository files navigation

The Potato Processor

Processor architecture overview diagramme

The Potato Processor is a simple RISC-V processor written in VHDL for use in FPGAs. It implements the 32-bit integer subset of the RISC-V Specification version 2.0 and supports large parts of the the machine mode specified in the RISC-V Privileged Architecture Specification v1.10.

The processor has been tested on an Arty board using the example SoC design provided in the example/ directory and the applications found in the software/ directory. Synthesis and implementation has been tested on various versions of Xilinx' Vivado toolchain, most recently version 2019.2.

Features

  • Supports the complete 32-bit RISC-V base integer ISA (RV32I) version 2.0
  • Supports large parts of the machine mode defined in the RISC-V Privileged Architecture version 1.10
  • Supports up to 8 individually maskable external interrupts (IRQs)
  • 5-stage "classic" RISC pipeline
  • Optional instruction cache
  • Supports the Wishbone bus, version B4

Peripherals

The project includes a variety of Wishbone-compatible peripherals for use in system-on-chip designs based on the Potato processor. The main peripherals are:

  • Timer - a 32-bit timer with compare interrupt
  • GPIO - a configurable-width generic GPIO module
  • Memory - a block RAM memory module
  • UART - a UART module with hardware FIFOs, configurable baudrate and RX/TX interrupts

Quick Start/Instantiating

To instantiate the processor, add the source files from the src/ folder to your project. Use the pp_potato entity to instantiate a processor with a Wishbone interface. Some generics are provided to configure the processor core.

An example System-on-Chip for the Arty development board can be found in the example/ directory of the source repository.

Compiler Toolchain

To program the processor, you need an appropriate compiler toolchain. To compile a working toolchain, go to the RISCV GNU toolchain repository and clone the project. Compile and install the toolchain using the following commands (note that make will both build and install the toolchain, ensure that the destination directory is writeable by your user):

./configure --prefix=/opt/riscv-toolchain --with-abi=ilp32 --with-arch=rv32i
make

Reporting bugs and issues

Bugs and issues related to the Potato processor can be reported on the project's GitHub page.