Nagios check for Denco Air Conditioning units
+++ Installation +++
Copy the perl file to your libexec folder on the Nagios server. Set permissions on the perl file to 0755.
+++ Usage +++
All Sensors except ALARMS can accept warning and critical values. The URL must be supplied or it will default to http://192.168.0.4
+++ Examples +++
check_denco_web.pl -w 24 -c 45 -U http://192.168.0.4/http/index.html -s TEMP
check_denco_web.pl -w 24 -c 45 -U http://192.168.0.4/http/index.html -s HUMIDITY
check_denco_web.pl -U http://192.168.0.4/http/index.html -s ALARMS
+++ ALARMS Monitored +++
The following alarm statuses are monitored and will create a critical alert if any have a status of "1" with the exception of "Filter Blocked, Auxiliary Alarm, Denconet Comms Failure, Humidifier Cylinder Exhausted" which will go warning:-
Airflow Fail
Filter Blocked
Water Detection
Auxiliary Alarm
High Control Temperature
Low Control Temperature
High Control Humidity
Low Control Humidity
Klixon Trip
Compressor 1 HP Trip
Compressor 2 HP Trip
Compressor 3 HP Trip
Compressor 4 HP Trip
Circuit 1 (VRF) HP Trip
Circuit 2 (VRF) HP Trip
Compressor 1 LP Trip
Compressor 2 LP Trip
Compressor 3 LP Trip
Compressor 4 LP Trip
Circuit 1 (VRF) LP Trip
Circuit 2 (VRF) LP Trip
Denconet Comms Failure
Humidifier Cylinder Exhausted
Refrigerant Leak Detection