Hardware PCB - LICENCE (CC BY-NC-SA 4.0)

Based on TPL5010

For work you will need solder ONE jumper for setting delay of watchdog

PINOUT

• VDD - 1.8 to 5.5V
• GND
• DELAY (DLY) - Time Interval set and Manual Reset
• DONE - Logic Input for watchdog functionality
• WAKE - Timer output signal generated every Digital pulsed signal to wake up the µC at the end of tIP period.
• RST - Reset Output (open drain output)

You can too add your delay with the 'delay' (DLY on silkscreen) see bellow (MORE IN DATASHEET)

TODO

• Add TPL5010
• Add resistor for 100MS
• Add resistor for 500MS
• Add resistor for 1S
• Add resistor for 3S
• Add resistor for 5S

3D VIEW

PCB VIEW

SCHEMATIC VIEW