update, issue #2421

olikraus · Apr 28, 2024 · f5efbbd · f5efbbd
1 parent eb00ddd
commit f5efbbd
Showing 1 changed file with 97 additions and 13 deletions.
diff --git a/csrc/u8x8_d_pcf8812.c b/csrc/u8x8_d_pcf8812.c
@@ -61,6 +61,21 @@ static const uint8_t u8x8_d_pcf8812_96x65_init_seq[] = {
 };
 
 
+static const uint8_t u8x8_d_pcf8812_101x64_init_seq[] = {
+ U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
+ U8X8_C(0x21), // PowerON, ExtCommandSet
+ U8X8_C(0x09), // Internal HV-gen x3
+ U8X8_C(0xB7), // Set Vop
+ U8X8_C(0x16), // Bias n=2 //15
+ U8X8_C(0x06), // Temperature coeff 2
+ U8X8_C(0x20), // StandartCommandSet
+ U8X8_C(0x0C), // normal mode, display non-inverted
+ U8X8_END_TRANSFER(), /* disable chip */
+ U8X8_END() /* end of sequence */
+};
+
+
+
 static const uint8_t u8x8_d_pcf8812_96x65_powersave0_seq[] = {
  U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
  U8X8_C(0x020), /* power on */
@@ -157,6 +172,86 @@ static uint8_t u8x8_d_pcf8812_96x65_generic(u8x8_t *u8x8, uint8_t msg, uint8_t a
 }
 
 
+static uint8_t u8x8_d_pcf8812_101x64_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+ uint8_t x, c;
+ uint8_t *ptr;
+ switch(msg)
+ {
+ /* handled by the calling function
+ case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+ u8x8_d_helper_display_setup_memory(u8x8, &u8x8_pcf8812_96x65_display_info);
+ break;
+ */
+ case U8X8_MSG_DISPLAY_INIT:
+ u8x8_d_helper_display_init(u8x8);
+ u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_101x64_init_seq); 
+ break;
+ case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
+ if ( arg_int == 0 )
+ u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_96x65_powersave0_seq);
+ else
+ u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_96x65_powersave1_seq);
+ break;
+/*
+ case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
+ if ( arg_int == 0 )
+ {
+ u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_96x65_flip0_seq);
+ u8x8->x_offset = u8x8->display_info->default_x_offset;
+ }
+ else
+ {
+ u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_96x65_flip1_seq);
+ u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
+ }
+ break;
+*/
+#ifdef U8X8_WITH_SET_CONTRAST
+ case U8X8_MSG_DISPLAY_SET_CONTRAST:
+ u8x8_cad_StartTransfer(u8x8);
+ u8x8_cad_SendCmd(u8x8, 0x021 ); /* command mode, extended function set */
+ u8x8_cad_SendArg(u8x8, (arg_int>>1)|0x80 ); /* 0..127 for contrast */
+ u8x8_cad_EndTransfer(u8x8);
+ break;
+#endif
+ case U8X8_MSG_DISPLAY_DRAW_TILE:
+ u8x8_cad_StartTransfer(u8x8);
+ x = ((u8x8_tile_t *)arg_ptr)->x_pos; 
+ x *= 8;
+ x += u8x8->x_offset;
+
+ u8x8_cad_SendCmd(u8x8, 0x020 ); /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
+ u8x8_cad_SendCmd(u8x8, 0x080 | x);
+ u8x8_cad_SendCmd(u8x8, 0x040 | ((u8x8_tile_t *)arg_ptr)->y_pos);
+
+ do
+ {
+ c = ((u8x8_tile_t *)arg_ptr)->cnt;
+ ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
+ u8x8_cad_SendData(u8x8, c*8, ptr); /* note: SendData can not handle more than 255 bytes */
+ /*
+ do
+ {
+ u8x8_cad_SendData(u8x8, 8, ptr);
+ ptr += 8;
+ c--;
+ } while( c > 0 );
+ */
+ arg_int--;
+ } while( arg_int > 0 );
+
+ u8x8_cad_EndTransfer(u8x8);
+ break;
+ default:
+ return 0;
+ }
+ return 1;
+}
+
+
+
+
 static const u8x8_display_info_t u8x8_pcf8812_96x65_display_info =
 {
  /* chip_enable_level = */ 0,
@@ -216,18 +311,7 @@ static const u8x8_display_info_t u8x8_pcf8812_101x64_display_info =
  /* pixel_height = */ 64
 };
 
-static const uint8_t u8x8_d_pcf8812_101x64_init_seq[] = {
- U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
- U8X8_C(0x21), // PowerON, ExtCommandSet
- U8X8_C(0x09), // Internal HV-gen x3
- U8X8_C(0xB7), // Set Vop
- U8X8_C(0x16), // Bias n=2 //15
- U8X8_C(0x06), // Temperature coeff 2
- U8X8_C(0x20), // StandartCommandSet
- U8X8_C(0x0C), // normal mode, display non-inverted
- U8X8_END_TRANSFER(), /* disable chip */
- U8X8_END() /* end of sequence */
-};
+
 
 
 uint8_t u8x8_d_pcf8812_101x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
@@ -242,6 +326,6 @@ uint8_t u8x8_d_pcf8812_101x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *
  u8x8_d_helper_display_init(u8x8);
  u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_101x64_init_seq); 
  } 
- return u8x8_d_pcf8812_96x65_generic(u8x8, msg, arg_int, arg_ptr);
+ return u8x8_d_pcf8812_101x64_generic(u8x8, msg, arg_int, arg_ptr);
 }