Skip to content

WSServer is a fast, configurable, and extendable WebSocket Server for UNIX systems written in C (C11).

License

Notifications You must be signed in to change notification settings

mortzdk/Websocket

Repository files navigation

WSServer a C WebSocket Server

Build Status Financial Contributors

WSServer is a fast, configurable, and extendable WebSocket Server for UNIX systems written in C (C11).

As of version 2.0.0 the WSServer has been completely rewritten with many new features, better support, better extendability and generally as a more stable WebSocket server.

Current Version: v2.1.0

Early history

The original WebSocket server (v1.0.0 and before) started out as a hobby project in 2012. The idea at the time, was to learn the C language and understand the basics of WebSockets. The initial version of the server worked for some but not all aspects of the protocols present at that time. At that time, different browsers implemented different versions of the WebSocket Protocol, which made it difficult to support all browsers. Today all major browsers support the RFC6455 protocol, which has been stable for many years.

Present (2020)

WSServer now supports all aspects of the RFC6455 protocol, including the RFC7692 that enables the permessage-deflate extension. The implementation is verified by the Autobahn testsuite and by a lot of unit tests. It furthermore support the older protocols HYBI10 and HYBI07 as there are no noteable difference between those and the current stable one. Currently there are no support for older versions of the protocol.

Donate

To support further development on this project and financially support the developer having a nice cup of coffee, you can make a donation of your choice here.

How to get started

To build the WSServer for your UNIX system, simply run: make release. This will compile extensions, subprotocols, and the binary that will be available from: ./bin/WSServer.

Currently the WSServer support only one extension namely the permessage-deflate extension. Read more about this implementation here.

Furthermore it supports two subprotocols: echo and broadcast. The echo subprotocol is a simple protocol that sends whatever message received, back to the same client. This is also the default protocol chosen, if no subprotocol is provided by the client. The broadcast subprotocol is slightly more advanced. It sends a message from one client to all other connected clients. The behaviour is basically as a public chat room.

The server can be configured by providing a -c [path_to_config_file.json] flag. If no configuration is provided, the server will run with a default configuration, that support WebSocket over HTTP on port 80. You can read more about the structure and description of the configuration file in the configuration section.

Log

WSServer keeps a log file at logs/WSServer.log. The detail of the log is defined by the log_level value in the configuration. Default for a release build is 3 (FATAL, ERROR, WARN, INFO). Default for a test build is 5 (FATAL, ERROR, WARN, INFO, DEBUG, TRACE).

The log file is a good tool for discovering misbehavior of the server, such as when the server isn't able to start, since port 80 is already occupied by another server instance.

Dependencies

WSServer does in principle not rely on any third-party libraries in order to serve as a WebSocket server. However if you want the complete feature set the zlib and one of the SSL libraries OpenSSL, WolfSSL, BoringSSL, LibreSSL must be installed on your system in order to support the permessage-deflate extension and SSL (WSS).

Ubuntu
$ sudo apt-get install zlib1g-dev
$ sudo apt-get install openssl
$ sudo apt-get install wolfssl
Arch
$ pacman -S zlib
$ pacman -S wolfssl
$ pacman -S libressl
MacOS
$ brew install zlib
$ brew install openssl
$ brew install wolfssl
FreeBSD
$ pkg install libressl
$ pkg install boringssl
$ pkg install openssl
$ pkg install zlib

If the installation method is not listed above or your package manager doesn't contain the software, it can all be build from source.

No other dependencies are required with regards to building the server with the full feature set.

If you want to run the Autobahn testsuite and the unit tests yourself, further dependencies are required. These are docker and criterion.

Ubuntu
$ sudo apt install docker.io
$ sudo add-apt-repository ppa:snaipewastaken/ppa
$ sudo apt-get update
$ sudo apt-get install criterion-dev
Arch
$ pacman -S docker
$ pacman -S criterion
MacOS
$ brew install docker
$ brew install snaipe/soft/criterion
FreeBSD
$ pkg install docker

Criterion can be build for FreeBSD using the following guide.

Configuration

An example of a configuration file can be found at here. A lot of different things are configurable through the configuration file.

Origins

The origins key define a subset of allowed origins. It is always recommended to define this subset. In case no subset is defined a client can connect from anywhere.

WebSocket URI

A WebSocket URI consists of a scheme, host, port, path and a query. Take for example:

wss://mortz.dk:9011/websocket?csrf-token=asgjh48hs389hdla.

The wss part of the URI is defined as the scheme, the mortz.dk part is defined as the host, the 9011 part is defined as the port, the /websocket part is defined as the path and the ?csrf-token=asgjh48hs389hdla part is defined as the query. The specific allowance of all 5 parts of the WebSocket URI are configurable.

The hosts key define a subset of strings allowed as the host. In the example above, if we only want clients connecting to mortz.dk, we can add that string to the subset.

The paths key define a subset of strings allowed as the connecting path. In the example above, if we only want clients connecting through the path /websocket, we can add that string to the subset. The path / will always be a valid connection path. The string values of the paths key are allowed to use POSIX Extended Regular Expressions syntax.

The queries key define a subset of strings allowed as the queries. In the example above, if we only want clients to use a specific query csrf-token=[^&]*, we can add that string to the subset. The string values of the paths key are allowed to use POSIX Extended Regular Expressions syntax. A WebSocket URI without any queries is always allowed.

The scheme and port part of the WebSocket URI is checked based on the ports choosen for http and https.

Port

The port key of the setup object is used to define the ports that http (ws) version and the https (wss) should be listening to.

A http (ws) version of the server will always be available. The https (wss) version requires further configuration of SSL.

Extensions

The extensions key of the setup object is used to define an array of supported extensions. Each entry in the array is an object itself containing a file and config key. The file key should point to the location of the shared object representing the extension. The basename of the file key is used as the extension name. The config key can be used to provide extra configuration to the extension.

Subprotocols

The subprotocols key of the setup object is used to define an array of supported subprotocols. Each entry in the array is an object itself containing a file and config key. The file key should point to the location of the shared object representing the subprotocol. The basename of the file key is used as the subprotocol name. The config key can be used to provide extra configuration to the subprotocol.

Favicon

The favicon key of the setup object is used to define a favicon to serve for HTTP and HTTPS request. A lot of browsers do the request for favicons per default when performing HTTP and HTTPS requests. By defining this with the path to a valid ICO file, the WSServer will return a favicon.

Timeouts

The timeout key of the setup object is used to define different timeouts of the WSServer.

The poll key define a timeout for event polling. By setting it to a positive integer n, the event loop will be interrupted every n milliseconds.

The read key define a timeout for the READ event. The timeout is checked whenever the server requires to read more data from the client in order to succeed. By setting it to a positive integer n the request will fail if the next read took longer than n milliseconds.

The write key define a timeout for the WRITE event. The timeout is checked whenever the server requires to write more data to the client than it is currently able to buffer. By setting it to a positive integer n the request will fail if the next write took longer than n milliseconds.

The client key define a timeout for when the client was last active. By setting it to a positive n integer, the client will be disconnected if it has not been active the last n milliseconds.

The pings key defines the amount of pings performed within the span of the client timeout key. If this value is set, it is recommended to use a value stricly higher than 1, as the internal timing of the server is not 100% accurate.

Size

A lot of different sizes can be adjusted for the WSServer. All sizes but the ringbuffer are defined in bytes.

The payload size define how large a size of payload the server is willing to accept from the client.

The header size define how large a HTTP header the server will accept from the client.

The uri size define how large a URI the server will accept from the client.

The buffer size define how large the internal read and write buffers should be.

The thread size define how large each thread of the WSServer can maximally be.

The ringbuffer size define how many messages about to be written each client can store in their ringbuffer.

The frame size define the maximal payload size of a single frame.

The fragmented size define how many fragments (frames) one single message can consist of.

Pool

Internally the WSServer runs a threadpool to schedule IO work from the clients.

The worker key define the amount of threads the threadpool shall consist of. Generally the rule of thumb is that the higher the load, the more threads. However the optimal amount of workers is probably system and hardware dependent.

SSL (WSS)

WSServer supports the wss scheme by the use of one of currently 4 SSL libraries (OpenSSL, WolfSSL, BoringSSL, LibreSSL). The default choice is OpenSSL, but the SSL library can be switched as follows:

# OpenSSL
$ make

# WolfSSL
$ make SSL=WOLFSSL

# LibreSSL
$ make SSL_LIBRARY_PATH=/path/to/libressl

# BoringSSL
$ make SSL_LIBRARY_PATH=/path/to/boringssl

Note that if compiled with SSL_LIBRARY_PATH the binary must be executed with LD_LIBRARY_PATH=/path/to/libressl/lib ./bin/WSServer.

If LibreSSL or BoringSSL is installed in place of OpenSSL the compilation should work out of the box by running make.

In order to activate SSL some configuration must be made.

The key key define the path to the SSL private key of the server. The private key must be in the PEM format.

The cert key define the path to the SSL server certificate. The certificate must be in the PEM format.

The ca_file key define the path to the root CA certificate.

The ca_path key define the path to a folder containing the trusted root CA certifates.

The dhparam key define the path to the dhparam file. The dhparam file must be in the PEM format.

The cipher_list key define the ciphers that the server allows usage of.

The cipher_suites key define the cipher suites that the server allows usage of.

The compression key define whether compression should be used when communicating over SSL,

The peer_cert key define whether a peer certificate is required by the client.

WebSocket Extensions

The WSServer enables usage of an arbitrary number of extensions. Extensions provide a mechanism for implementations to opt-in to additional protocol features.

The extensions themselves can be implemented in any language that is able to compile into a shared object (.so file) with the following public functions:

typedef void (*setAllocators)(WSS_malloc_t extmalloc, WSS_realloc_t extrealloc, WSS_free_t extfree);
typedef void (*onInit)(char *config);
typedef void (*onOpen)(int fd, char *param, char **accepted, bool *valid);
typedef void (*inFrame)(int fd, wss_frame_t *frame);
typedef void (*inFrames)(int fd, wss_frame_t **frames, size_t len);
typedef void (*outFrame)(int fd, wss_frame_t *frame);
typedef void (*outFrames)(int fd, wss_frame_t **frames, size_t len);
typedef void (*onClose)(int fd);
typedef void (*onDestroy)();

Where WSS_malloc_t, WSS_realloc_t, and WSS_free_t are defined as:

typedef void *(*WSS_malloc_t)(size_t size);
typedef void *(*WSS_realloc_t)(void *ptr, size_t size);
typedef void (*WSS_free_t)(void *ptr);

and wss_frame_t is defined as:

typedef struct {
    bool fin;
    bool rsv1;
    bool rsv2;
    bool rsv3;
    uint8_t opcode;
    bool mask;
    uint64_t payloadLength;
    char maskingKey[4];
    char *payload;
    uint64_t extensionDataLength;
    uint64_t applicationDataLength;
} wss_frame_t;

For the server to be able to use a custom extension one has to configure the path to the shared object in the configuration file as described above.

You can have a look at the extensions folder to see how to implement your own extension.

Permessage-deflate

The WSServer comes with 1 build-in extension, namely the permessage-deflate extension defined in RFC7692. This extension enables compression and decompression of the frames between client and server.

WebSocket Subprotocols

The WSServer also enables usage of an arbitrary number of subprotocols. Subprotocols are application-level protocol layered over the WebSocket Protocol that are used to define the behaviour of the websocket protocol.

The subprotocols themselves can be implemented in any language that is able to compile into a shared object (.so file) with the following public functions:

typedef void (*setAllocators)(WSS_malloc_t submalloc, WSS_realloc_t subrealloc, WSS_free_t subfree);
typedef void (*onInit)(char *config, WSS_send send);
typedef void (*onConnect)(int fd, char *ip, int port, char *path, char *cookies);
typedef void (*onMessage)(int fd, wss_opcode_t opcode, char *message, size_t message_length);
typedef void (*onWrite)(int fd, char *message, size_t message_length);
typedef void (*onClose)(int fd);
typedef void (*onDestroy)();

Where WSS_send, WSS_malloc_t, WSS_realloc_t, and WSS_free_t are defined as:

typedef void (*WSS_send)(int fd, wss_opcode_t opcode, char *message, uint64_t message_length);
typedef void *(*WSS_malloc_t)(size_t size);
typedef void *(*WSS_realloc_t)(void *ptr, size_t size);
typedef void (*WSS_free_t)(void *ptr);

and wss_opcode_t is defined as:

typedef enum {
    CONTINUATION_FRAME = 0x0,
    TEXT_FRAME         = 0x1,
    BINARY_FRAME       = 0x2,
    CLOSE_FRAME        = 0x8,
    PING_FRAME         = 0x9,
    PONG_FRAME         = 0xA,
} wss_opcode_t;

You can have a look at the subprotocols folder to see how to implement your own subprotocol.

Client Authentication

Client authentication is not implemented directly in WSServer, but is supported through several means. The onConnect call of the subprotocol sends information about the connection to the subprotocol, this is information such as the ip, port, path and cookies. This can be used to do client authentication using cookies, using query parameters of the path or simply by having an initial round of authentication messages between the client and server.

As always it is strongly advised to use the origins array of the configuration to only allow for certain origins to use the server.

Echo

The echo subprotocol is a very simple subprotocol that just echo's whatever the client send back to the client. This subprotocol is especially useful for testing and is used in the Autobahn testsuite.

Broadcast

The broadcast subprotocol is slightly more advanced. It keeps track of when a client is connecting or closing in order to hold a map of those clients that should be broadcastet to. Whenever a client sends a message, the message is broadcastet to all other connected clients.

Documentation

WSServer automatically generates documentation based on the comments in the code. This documentation can be viewed here.

Furthermore one could take a look at the RFC6455 protocol and the RFC7692 protocol to understand how WebSockets and the permessage-deflate extension works.

Testing

WSServer has been heavily tested by the use of unit tests, the Autobahn testsuite and by having code coverage.

Unit tests

A lot of unit tests has been written using the Criterion unit testing library. As of right now the unit tests does not cover all files, and this is still work in progress.

The tests can be run by running make test.

Autobahn Testsuite

The Autobahn Testsuite is used to verify that the WSServer complies to the RFC6455 protocol. These tests can be used as both verification and as a measure of performance as a lot of the tests actually times the execution of a successful test.

The tests can be run by running make autobahn.

You can further see the current results of the tests here.

Code coverage

The coverage report can be generated by running make test and the latest can be seen here.

Further Work

Here is a list of prioritized further work that currently can be done:

  1. Test on FreeBSD/MacOS
  2. Use Autoconf to check dependencies
  3. Rate limiting
    • Rate limiting connections
      • Count-Min Sketch (Sliding window)
        • Belongs to the server object
        • Allocate 60 count-min sketches (one per minute)
        • Reset sketch if rotated
    • Rate limiting messages
      • Can be done by the subprotocols per message?
    • Rate limiting frames
      • Counting using Sliding window
        • Belongs to the session object
        • Allocate 60 integers (one per minute)
        • Reset sketch if rotated
  4. Fuzz testing
  5. Support HTTP2
  6. Performance Improvements
    • Look at 'khash' or 'tommy_hashdyn' instead of 'uthash' since these hashes seems to be faster
    • Realloc the double size of the current
    • Refactor wss_frame_t structure away. Use the frames as byte strings instead.
    • Callgrind
    • Cachegrind
  7. Backwards Specification Compability
    • hybi-06
    • hybi-05
    • hybi-04
    • hixie-76
    • hixie-75

Contributors

Here is a list of the contributors of v2.0.0 and above of the WSServer.

Morten Houmøller Nygaard Nicolas Mora

Libraries

WSServer makes use of other Open-Source libraries and code snippets. The links listed below have all been used in some way.

License

WSServer is licenced under the MIT license.