Skip to content
/ ARTool Public

R Package for Aligned Rank Transform for Nonparametric Factorial ANOVAs

Notifications You must be signed in to change notification settings

mjskay/ARTool

Repository files navigation

ARTool: R Package for the Aligned Rank Transform for Nonparametric Factorial ANOVAs

R build status Coverage status CRAN_Status_Badge GPL >= 2 DOI DOI

Matthew Kay, Northwestern University [email protected]
Lisa A. Elkin, University of Washington, [email protected]
James J. Higgins, Kansas State University, [email protected]
Jacob O. Wobbrock, University of Washington [email protected]

ARTool is an R package implementing the Aligned Rank Transform for conducting nonparametric analyses of variance on factorial models. This implementation is based on the ART procedure as used in the original implementation of ARTool by Wobbrock et al.

The package automates the Aligning-and-Ranking process using the art function. It also automates the process of running a series of ANOVAs on the transformed data and extracting the results of interest. It supports traditional ANOVA models (fit using lm), repeated measures ANOVAs (fit using aov), and mixed effects models (fit using lmer); the model used is determined by the formula passed to art.

Note: The documentation of this package assumes some level of familiarity with when and why you may want to use the aligned rank transform; the ARTool page provides a more in-depth (and highly approachable) introduction to the aligned rank transform and the motivation for its use.

Installation

You can install the latest released version from CRAN with this R command:

install.packages("ARTool")

Or, you can install the latest development version from GitHub with these R commands:

install.packages("devtools")
devtools::install_github("mjskay/ARTool")

Example

The general approach to using ART is to transform your data using art , verify the ART procedure is appropriate to the dataset using summary , and then run an ANOVA on the transformed data using anova .

First, let us load some example data:

library(ARTool)
data(Higgins1990Table5, package = "ARTool")

Higgins1990Table5 is a data frame from an experiment in which the effects of Moisture and Fertilizer on DryMatter in peat pots was tested. Four pots were placed on each Tray , with Moisture varied between Tray s and Fertilizer varied within Tray s. We can see the basic structure of the data:

str(Higgins1990Table5)
## 'data.frame':    48 obs. of  4 variables:
##  $ Tray      : Factor w/ 12 levels "t1","t2","t3",..: 1 1 1 1 2 2 2 2 3 3 ...
##  $ Moisture  : Factor w/ 4 levels "m1","m2","m3",..: 1 1 1 1 1 1 1 1 1 1 ...
##  $ Fertilizer: Factor w/ 4 levels "f1","f2","f3",..: 1 2 3 4 1 2 3 4 1 2 ...
##  $ DryMatter : num  3.3 4.3 4.5 5.8 4 4.1 6.5 7.3 1.9 3.8 ...
head(Higgins1990Table5, n=8)
##   Tray Moisture Fertilizer DryMatter
## 1   t1       m1         f1       3.3
## 2   t1       m1         f2       4.3
## 3   t1       m1         f3       4.5
## 4   t1       m1         f4       5.8
## 5   t2       m1         f1       4.0
## 6   t2       m1         f2       4.1
## 7   t2       m1         f3       6.5
## 8   t2       m1         f4       7.3

Step 1: Transform the data

To analyze this data using the aligned rank transform, we first transform the data using art . We specify the response variable (DryMatter ), the fixed effects and all of their interactions (Moisture*Fertilizer, or equivalently Moisture + Fertilizer + Moisture:Fertilizer), and any grouping terms if present (here, (1|Tray) ).

While (1|Tray) has no effect on the results of the aligned rank transformation, it will be used by anova to determine the type of model to run: when grouping terms are present, mixed effects models are run using lmer. If you wish to use a repeated measures ANOVA instead of a mixed effects model, you can use an Error term instead (see below for an example of this). If you do not having repeated measures, do not include any grouping terms or error terms.

m <- art(DryMatter ~ Moisture*Fertilizer + (1|Tray), data=Higgins1990Table5)

Step 2: Verify appropriateness of ART

To verify that the ART procedure was correctly applied and is appropriate for this dataset, we can look at the output of summary :

summary(m)
## Aligned Rank Transform of Factorial Model
## 
## Call:
## art(formula = DryMatter ~ Moisture * Fertilizer + (1 | Tray), 
##     data = Higgins1990Table5)
## 
## Column sums of aligned responses (should all be ~0):
##            Moisture          Fertilizer Moisture:Fertilizer 
##                   0                   0                   0 
## 
## F values of ANOVAs on aligned responses not of interest (should all be ~0):
##    Min. 1st Qu.  Median    Mean 3rd Qu.    Max. 
##       0       0       0       0       0       0

We see that the columns sums of aligned responses and the F values of ANOVAs on aligned responses not of interest are all ~0, indicating that the alignment correctly “stripped out” effects not of interest. Thus, we can apply the ANOVA on the transformed data.

Step 3: Run the ANOVA

ARTool automatically selects the model to be used for the ANOVA. Because we have included a grouping term, (1|Tray), ARTool will fit mixed effects models using lmer and run the ANOVAs on them:

anova(m)
## Analysis of Variance of Aligned Rank Transformed Data
## 
## Table Type: Analysis of Deviance Table (Type III Wald F tests with Kenward-Roger df) 
## Model: Mixed Effects (lmer)
## Response: art(DryMatter)
## 
##                             F Df Df.res     Pr(>F)    
## 1 Moisture             23.833  3      8 0.00024199 ***
## 2 Fertilizer          122.402  3     24 1.1124e-14 ***
## 3 Moisture:Fertilizer   5.118  9     24 0.00064665 ***
## ---
## Signif. codes:   0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Alternative model: Repeated Measures ANOVA

This particular study could also be analyzed using a repeated measures ANOVA, yielding the same results (note that repeated measures ANOVAs and mixed effects models will not always yield the same results). To instead run a repeated measures ANOVA, add an Error term to the model as you might for a call to aov:

m <- art(DryMatter ~ Moisture*Fertilizer + Error(Tray), data=Higgins1990Table5)
anova(m)
## Analysis of Variance of Aligned Rank Transformed Data
## 
## Table Type: Repeated Measures Analysis of Variance Table (Type I) 
## Model: Repeated Measures (aov)
## Response: art(DryMatter)
## 
##                       Error Df Df.res F value     Pr(>F)    
## 1 Moisture             Tray  3      8  23.833 0.00024199 ***
## 2 Fertilizer          Withn  3     24 122.402 1.1124e-14 ***
## 3 Moisture:Fertilizer Withn  9     24   5.118 0.00064665 ***
## ---
## Signif. codes:   0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Contrast tests

For an example of how to run contrast tests on an art model, see this vignette:

vignette("art-contrasts")

This vignette is also available here.

Problems

Should you encounter any bugs in this package, please file it here with minimal code to reproduce the issue.

Citations

Kay, M., Elkin, L. A., Higgins, J. J., and Wobbrock, J. O. (2021). ARTool: Aligned Rank Transform for Nonparametric Factorial ANOVAs. R package version 0.11.1, https://github.com/mjskay/ARTool. DOI: 10.5281/zenodo.594511.

For the ART procedure used by art() and anova.art(), cite:

Wobbrock, J. O., Findlater, L., Gergle, D., and Higgins, J. J. (2011). The Aligned Rank Transform for Nonparametric Factorial Analyses Using Only ANOVA Procedures. Proceedings of the ACM Conference on Human Factors in Computing Systems (CHI 2011). Vancouver, British Columbia (May 7-12, 2011). New York: ACM Press, pp. 143-146. https://depts.washington.edu/acelab/proj/art/. DOI: 10.1145/1978942.1978963.

For the ART-C contrast testing procedure used by art.con() and artlm.con(), cite:

Elkin, L. A., Kay, M, Higgins, J. J., and Wobbrock, J. O. (2021). An Aligned Rank Transform Procedure for Multifactor Contrast Tests. Proceedings of the ACM Symposium on User Interface Software and Technology (UIST 2021). Virtual Event (October 10-14, 2021). New York: ACM Press, pp. 754-768. DOI: 10.1145/3472749.3474784