Skip to content

Zigbee Stick based on RF-BM-2652P1/P2 Module from RF-STAR,with CC2652P on board

License

Notifications You must be signed in to change notification settings

mercenaruss/zigbee-stick-v4

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

39 Commits
 
 
 
 
 
 
 
 

Repository files navigation

ZigStar Stick and Shield ZIG-STAR.COM

I sell on Tindie

Features:

  • TI CC2652P SimpleLink™ 2.4 GHz Multiprotocol Wireless MCU targeting Zigbee,Bluetooth 5.1 Low Energy,Thread + 19.5-dBm high-power amplifier
  • Support RF-BM-2652P1 and RF-BM-2652P2 Module from RF-STAR,with CC2652P on board
  • BSL,RST Buttons
  • 2 LED for indication
  • Compatible with Z2M and ZHA
  • SMA antenna port for an external antenna
  • Self-programming via the cc2538-bsl.No external programmer needed! Push BSL button to trigger this mode.
  • Communicates via the common CH340E/CH340C USB-UART Bridge

For all documentation,description and instructions visit: ZIG-STAR.COM

Web-site is filled gradually.

Contact

For general enquiries, suggestions and errors spotted: Email me at [email protected] or write me directly in Telegram. Community contributions to this page are very much encouraged so you could also send pull requests with your proposed changes.

License

zigbee-stick-v4 is designed by DarthPCB's / Grecu Radu and licensed under the Solderpad Hardware License v2.1.