Skip to content

lsegal/samus

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Samus Gem Version Code Climate

Samus helps you automate the release of Open Source Software. Samus works through a manifest file to describe discrete steps that you typically perform when packaging and publishing code.

Samus comes with a set of built-in commands that let you prepare your repository, push your changes, package your library, and upload it to various locations / package managers. Samus is also open-source, so you can contribute new commands if you think they are useful to others. Finally, Samus allows you to install and share custom commands and credentials for building and publishing your code. That's right, Samus has a mechanism to share publishing credentials in a fairly secure way, so you can reliably publish releases from almost any machine.

Installing

Samus is a RubyGem and requires Ruby 1.9.x+. Installing is as easy as typing:

gem install samus

If you would rather use Samus via Docker, see the Docker section in Usage below.

Usage

Samus is driven by a manifest file that describes the steps to perform when building or publishing a release. You can just use Samus to publish, or you can use it for both, it's your choice.

Publishing

If you can handle building all of your assets on your own, you can use Samus just to publish your code. Create a manifest file called manifest.json (it must be named this way) and put it in a directory with all of your assets. The manifest file is just a list of discrete actions like so (minus comments):

{
  "actions": [
    {
      "files": "git.tgz",       // this is an archive of your git repository
      "action": "git-push",
      "arguments": {
        "remotes": "origin",
        "refs": "main v1.5.0" // the v1.5.0 is a tag for your release
      }
    },
    {
      "action": "gem-push",
      "files": ["my-built-gemfile.gem"],
      "credentials": "my-credentials-key"
    }
  ]
}

Note: The credentials section defines a flat file or executable Samus looks at to get your key for authentication. See the "Custom Commands & Credentials" section below for how to point to this file.

Now just run samus publish ., and Samus will run these commands in order, pushing your Git repository and your RubyGem to the world.

Building

In most cases you will want some help staging a release; Samus can help with that too. Just in the same way you created a manifest for publishing, you create a manifest file for building your release. The only difference is now you include build-time actions, in addition to your publish actions.

Here is an example that updates your version.rb file, commits and tags the release, and zips up your repository and RubyGem for publishing. Call it "samus.json" for easier integration:

// samus.json:
{
  "actions": [
    {
      "action": "fs-sedfiles",
      "files": ["lib/my-gem/version.rb"],
      "arguments": {
        "search": "VERSION = ['\"](.+?)['\"]",
        "replace": "VERSION = '$version'"
      }
    },
    {
      "action": "git-commit",
      "files": ["lib/my-gem/version.rb"]
    },
    {
      "action": "git-merge", // merge new commit into main branch
      "arguments": {
        "branch": "main"
      }
    },
    {
      "action": "archive-git-full",
      "files": ["git.tgz"],
      "publish": [{
        "action": "git-push",
        "arguments": {
          "remotes": "origin",
          "refs": "main v$version"
        }
      }]
    },
    {
      "action": "gem-build",
      "files": ["my-gem.gemspec"],
      "publish": [
        {
          "action": "gem-push",
          "files": ["my-gem-$version.gem"],
          "credentials": "my-credentials-key"
        }
      ]
    }
  ]
}

It looks a little longer, but it contains all of the steps to automate when bumping the VERSION constant, tagging a version, merging into the primary branch, and building the gem. To build a release with this manifest, simply type:

samus build 1.5.0

Samus will look for samus.json and build a release for version 1.5.0 of your code. It will produce an archive called release-v1.5.0.tar.gz that you can then publish with:

samus publish release-v1.5.0.tar.gz

You may have noticed some funny looking "$version" strings in the above manifest. Those strings will be replaced with the version provided in the build command, so all the correct tagging and building will be handled for you.

You will also notice that the publish commands are part of this manifest. In build mode, Samus handles building of the manifest.json document, grabbing any of the "publish" sections of an action and throwing them in the final manifest.json. As illustrated above, not all actions require a publish section. If you want to inspect the manifest file that Samus created, you can build your release as a directory instead of a zip with --no-zip.

Note: If you didn't name your manifest samus.json you can simply enter the filename in the build command as samus build VERSION manifest.json.

Docker Support

If you would prefer to run Samus on a pre-built image with prepared dependencies, you can use the lsegal/samus Docker image as follows:

docker run --rm -v $HOME:/root -w /root/${PWD#$HOME} -it lsegal/samus \
  samus build <VERSION>

Remember to replace <VERSION> with your version string (i.e. 1.0.0). Then to publish, use:

docker run --rm -v $HOME:/root:ro -w /root/${PWD#$HOME} -it lsegal/samus \
  samus publish release-v<VERSION>.tar.gz

Docker Isolation Notes

Note that these instructions are not meant to run an isolated release environment, but instead as a convenience to provide all of the non-Ruby dependencies that Samus might need. If you wish to build and deploy from an isolated environment, you would have to build a Dockerfile FROM lsegal/samus and ensure that all necessary credentials and configuration is copied in. This is an exercise left up to the user, since it can be complex and depends on the amount of configuration needed for building (Git configuration, SSH keys, etc).

Also note that this syntax is currently only supported for POSIX style systems and does not yet support Windows.

Built-in Commands

Samus comes with a number of built-in commands optimized for dealing with the Git workflow. You can use samus show-cmd to list all available commands, both for building and publishing a release. Each command has documentation for which files and arguments it accepts.

$ samus show-cmd
... a list of commands ...

To view a specific command, make sure to include the stage (build or publish):

$ samus show-cmd publish git-push
Publish Command: git-push

Pushes Git repository refs to a set of remotes.

Files:
  * The repository archive filename.

Arguments:
  * refs:    a space delimited set of commits, branches, or tags to push.
  * remotes: a space delimited set of remotes to push refs to.

Custom Commands & Credentials

Sometimes you will need to create custom commands that do specific things for your project. If they are generic, you should submit them to this project, but if not, you can install custom commands that only you have access to. This goes for credentials too, which you can install privately on your machine.

Samus works best when custom packages are Git-backed (preferably private) repositories. In this case, you can simply type samus install REPO to download the repository to your machine:

samus install [email protected]:my_org/samus_config

Of course, Samus doesn't need these custom packages to be Git-backed. All the above command does is clone a repository into the ~/.samus directory. The above command creates:

.samus/
  `- samus_config/
     `- commands/
        `- build/
           `- my-command
     `- credentials/
        `- my-credentials-key

Commands

Commands in Samus are just shell scripts which execute from the workspace or release directory (unless overridden by the build manifest). Samus passes all argument values (the keys from the "arguments" section of the manifest) in as environment variables with a prefixed underscore. For example, the rake-task command is just:

#!/bin/sh

rake $_TASK

The $_TASK variable is the "task" argument from the manifest.

Note that commands must be executable (chmod +x) and have proper shebang lines or they will not function.

Stages

Commands either live in the build/ or publish/ sub-directories under the commands directory depending on whether they are for samus build or samus publish. These are considered the respective "stages".

Special Variables

In addition to exposing arguments as underscored environment variables, Samus also exposes a few special variables with double underscore prefixes:

  • __BUILD_DIR - this variable refers to the temporary directory that the release package is being built inside of. The files inside of this directory, and only the files inside of this directory, will be built into the release archive. If you write a build-time command that produces an output file which is part of the release, you should make sure to move it into this directory.
  • __ORIG_BRANCH - the original branch being built from.
  • __BUILD_BRANCH - the name of the branch being built to.
  • __RESTORE_FILE - the restore file is a newline delimited file containing branches and their original ref. All branches listed in this file will be restored to the respective ref at the end of samus build regardless of success status. If you make destructive modifications to existing branches in the workspace repository, you should add the original ref for the branch to this file.
  • __CREDS_* - provides key, secret, and other values loaded from credentials. See Credentials section for more information on how these are set.

Help Files

In order to integrate with samus show-cmd <stage> <command> syntax, your command should include a file named your-command.help.md in the same directory as the command script itself. These files are Markdown-formatted files and should follow the same structure of the built-in command help files:

Short description of command.

- Files:

  - Description of what the command line arguments are

- Arguments:
  - argname: Documentation for argument

Notes:

  • The first line of the help file is used as the summary in the show-cmd listing.
  • Never omit a section. If a command has no files or arguments, use "(none)" as the list item text.

Credentials

Custom credentials are just flat files or executables in the credentials/ directory of your custom package. When you use the "credentials" section in a publish action of the manifest, the value should match the filename of a file in one of your credentials directories. For instance, for the my-credentials-key value in our manifest examples, you should have:

.samus/samus_config/credentials/my-credentials-key

This file is either a flat file with the format:

Key: THE_API_KEY
Secret: THE_SECRET

Or, alternatively, an executable which prints the above format to standard out.

These values are read in by Samus and get exposed as $__CREDS_KEY and $__CREDS_SECRET respectively in Samus commands. You can provide other metadata as well, which would be included as $__CREDS_NAME (for the line "NAME: value").

Manifest File Format

The following section defines the manifest formats for the samus.json build manifest as well as the manifest.json stored in release packages.

Base Format

The base format is defined as follows:

{
  "actions": [
    {
      "action": "COMMAND_NAME",   // [required] command name to execute
      "files": ["file1", ...],    // optional list of files
      "arguments": {              // optional map of arguments to pass to cmd
        "key": "value",           // each key is passed in as _key in ENV
        // ... (optional) more keys ...
      },
      "pwd": "path"               // optional path to execute command from
      "credentials": "KEY",       // optional credentials to load for cmd
    },
    // ... (optional) more action items ...
  ]
}

All manifests include a list of "actions", known individually as action items. Each action item has a single required property, "action", which is the command to execute for the action (found in samus show-cmd). An optional list of files are passed into the command as command line arguments, and the "arguments" property is a map of keys to values passed in as environment variables with a "_" prefix (key "foo" is set as environment variable "_foo"). Optional credentials are loaded from the credentials directory.

Build Manifest Format

The build manifest format is similar to the above but allows for two extra keys in each action item called "publish" and "condition".

"publish" Property

The "publish" property should contain the action item that is added to the final manifest.json built into the release package if the action item is evaluated (condition matches and command successfully executes). If a "files" property is set on the parent action item, that property is copied into the publish action by default, but it can be overridden.

Here is an example build manifest showing the added use of the "publish" property:

{
  "actions": [
    {
      "action": "readme-update",
      "files": ["README.txt"],
      "publish": {
        "action": "readme-publish"
        "arguments": {
          "host": "www.mywebsite.com"
        },
        "credentials": "www.mywebsite.com"
      }
    },
    {
      "action": "readme-build",
      "files": ["README.txt"],
      "publish": {
        "action": "readme-publish"
        "arguments": {
          "files": ["README.html"], // override files property
          "host": "www.mywebsite.com"
        },
        "credentials": "www.mywebsite.com"
      }
    }
  ]

}

"condition" Property

The "condition" property is a Ruby expression that is evaluated for truthiness to decide if the action item should be evaluated or skipped. A common use for this is to take action based on the version (see "$version" variable section below). The following example runs an action item only for version 2.0+ of a release:

{
  "action": "rake-task",
  "arguments": { "task": "assets:package" },
  "condition": "'$version' > '2.0'"
}

"$version" Variable

A special variable "$version" is interpolated when loading the build manifest. This variable can appear anywhere in the JSON document, and is interpolated before any actions or conditions are evaluated.

Contributing & TODO

Please help by contributing commands that Samus can use to build or publish code. Integration with different package managers would be helpful, as well as improving the kinds of build-time tasks that are exposed.

Copyright

Samus was created by Loren Segal in 2014 and is available under MIT license.