Chemically Directed Atom Swap Hopping -- Crystal structure prediction by swapping atoms in unfavourable chemical environments.
Please note that this is not the DASH software for structure solution from powder diffraction data, which is developed by the Cambridge Crystallographic Data Centre and is available at: https://www.ccdc.cam.ac.uk/dash
We acknowledge funding from the EPSRC Programme Grant: EP/N004884/1 "Integration of Computation and Experiment for Accelerated Materials Discovery"
ChemDASH is a crystal structure prediction code written by Paul Sharp and developed at the University of Liverpool. ChemDASH is written in python 3.5+, and depends on the atomic simulation environment (ASE), spglib, and their subsequent dependencies. ChemDASH implements the basin hopping method to explore the potential energy surface, with atom swaps used to generate new structures. Atoms can be swapped at random, or we can use the method of directed swapping to rank each atom according to its chemical environment, with atoms in the least favourable environments prioritised for swapping. Structures in ChemDASH can be initialised by populating cation and anion sites on initialisation grids, or from a CIF file. Structural optimisation can be done using either the GULP or VASP packages.
ChemDASH is discussed in the scientific paper:
Paul M. Sharp, Matthew S. Dyer, George R. Darling, John B. Claridge and Matthew J. Rosseinsky, Chemically directed structure evolution for crystal structure prediction, Phys. Chem. Chem. Phys., 2020, 22, 18205-18218, https://pubs.rsc.org/en/content/articlelanding/2020/cp/d0cp02206c
Please cite this paper in any publications arising from your use of ChemDASH.
To run a ChemDASH calculation, two input files are required: a “.atoms” file and a “.input” file. By default they must both have the same basename. With valid files and a copy of ChemDASH in the current working directory, ChemDASH is run by typing:
python chemdash <basename>
where <basename> is the basename of both the “.atoms” and “.input” files. The output of the calculation is written to the file “<basename>.chemdash”. If there are errors in either the “.atoms” or the “.input” files, then the calculation is stopped, with errors listed in the file “<basename>.error”. To restart a ChemDASH run, with a restart file present, run with “restart=True” in the input file.
ChemDASH does not have to be installed in the working directory, in this case, run ChemDASH with:
python <filepath_to_ChemDASH_directory> <basename>
for example:
python /home/software/ChemDASH/chemdash <basename>
There are a number of flags that enable ChemDASH options, these are listed by typing:
python chemdash -h
These options are:
-h, --help show this help message and exit
-i, --input Print all options for the ".input" file with a
description of each option. (default: False)
-p <input file> [<input file> ...], --parse <input file> [<input file> ...]
Parse the given input file, report any errors and
exit. (default: None)
-s <cif file>, --symm <cif file>, --symmetry <cif_file>
Use spglib to look for higher symmetry in the supplied
cif file, and write to a new file "<cif_file>_symm.cif".
(default: None)
-w [<input file>], --write [<input file>]
Write an input file that includes all keywords with
their default values to the given file and exit.
(default: None)
-v, --version show ChemDASH version number and exit
ChemDASH requires python version 3.5+, and the following python libraries:
ase (Atomic Simulation Environment)
numpy
argparse
collections
copy
math
os
re
shutil
spglib
subprocess
sys
time
yaml
These libraries can all be installed at once by typing
pip install -r requirements.txt
at the command line.
The atoms file contains a list of all of the atoms to be used in the
simulation. On each line, we have the atomic symbol for a particular
element, the number of atoms of that element, and the ionic charge
(oxidation state) of these atoms. For example, the atom file for a
single formula unit (i.e., five atoms) of Strontium Titanate
(SrTiO3) reads:
O 3 -2
Sr 1 +2
Ti 1 +4
An atoms file is required even when the initial structure is to be read from a CIF file. In that case, the order of atoms listed must match the order they are listed in the CIF, and vacancies can be specified using the chemical symbol “X”, i.e,
X 5 0
The input file lists the values of all of the options for a ChemDASH calculation in the format:
<option>=<value>
where a “#” is a comment character. A minimal working example of an input file is given below:
# General inputs
#
grid_type=orthorhombic
temp=0.025
grid_points=2,2,3
cell_spacing=1.0
atom_rankings=random
vacancy_separation=1.0
vacancy_exclusion_radius=2.0
max_structures=10
#
# GULP inputs
#
calculator=gulp
gulp_executable=gulp
calculator_time_limit=300
num_calc_stages=2
gulp_files=conj, bfgs
gulp_library=ff.lib
#
# GULP Keywords and Options
#
gulp_keywords=opti, c6, pot, conp
gulp_calc_1_keywords=conj
gulp_calc_2_keywords=lbfgs
#
gulp_options=time 5 minutes
gulp_calc_1_options=stepmx 0.1
gulp_calc_2_options=stepmx 0.5, lbfgs_order 5000, maxcyc 1000
#
#
The “temp” option states the value of kT in eV for the Monte–Carlo temperature that determines whether or not we hop to higher–energy basins during the run. The total number of structures explored in the run is given by “max_structures”. The other options listed in this example are explained in the following sections, and a full list of input options, with default and supported values, is given in the "Full List of Input Options" section.
ChemDASH has a test suite written in pytest, contained in the directory “tests”. If pytest is installed, the test suite can be run by typing:
py.test tests
If any tests fail, please contact the developers.
There are three possible initialisation grids in ChemDASH:
“orthorhombic”, “rocksalt”, and “close_packed”. These are specified in
the “grid_type” input option. There are two more input options that
need to be considered. Firstly “grid_points” is used to specify the
number of grid points on the ANION sublattice. This can be input as
a single number for an
When initialising from a CIF file, the file should be specified in the input file with the option “initial_structure_file”. A “.atoms” file is still required, with the atoms listed in the same order in both the “.atoms” file and the CIF file. In addition to setting “grid_points” and “cell_spacing”, for close–packed initialisation grids we can set the stacking sequence with “cp_stacking_sequence” using a string consisting of “A”, “B”, and “C” provided the number of layers is equal to the final value in “grid_points”. We can also choose from an “oblique” or “centred_rectangular” lattice using “cp_2d_lattice”.
ChemDASH gives the option of using a vacancy grid by setting the option “vacancy_grid” to True. A vacancy grid is a cubic grid of points placed onto the structure, with points that lie within a certain distance of an atom removed. The spacing of the vacancies is set with “vacancy_separation”, and the exclusion radius around each atom within which the points on the vacancy grid are removed is set using “vacancy_exclusion_radius”. If a vacancy grid is not used, then the leftover points from the initialisation grid are used as vacancies.
Structural optimisation in ChemDASH is handled by either GULP or VASP. The desired software is set by the input option “calculator”, with “calculator_cores” used to set how many cores are desired for parallel calculations. The option “update_atoms” (default=True) is used to decide whether to swap atoms in optimised geometries (if True), or revert to the original, unoptimised geometry for the swap.
In ChemDASH, it is possible to run structural optimisations in a number of stages, with a different set of optimisation settings for each stage. For example, different stages of the calculation can be used to switch between conjugate gradient and BFGS algorithms, or to switch to higher precision parameters as the calculation progresses. The number of stages in the calculation is set with “num_calc_stages”, and ChemDASH provides the options to set GULP/VASP options for each stage of the calculation (see below).
The filepath of the GULP executable should be given as “gulp_executable” in the input file. The keywords to be applied to ALL stages of the gulp calculation are listed in the ChemDASH input file as “gulp_keywords”, whilst keywords to apply to a particular stage of the calculation are given as “gulp_calc_<number>_keywords” (e.g., “gulp_calc_1_keywords”). Similarly, for GULP options we use “gulp_options” for all stages and “gulp_calc_<number>_options” for a particular stage in the ChemDASH input file. Both keywords and options are given as comma–separated lists. When optimising using GULP, it is possible to terminate the calculation if the gnorm is above a certain value after a particular stage by giving a value for “gulp_calc_<number>_max_gnorm”.
For each GULP calculation, the GULP output files are saved as “structure_<number>_<stage>.<gin|got|res>”. The strings for each stage are given as a comma–separated list in the ChemDASH input option “gulp_files”. GULP uses force fields to optimise structures, the file containing the forcefield for the calculation is found from the option “gulp_library”. If any elements in this forcefield use a shell, these elements need to be listed in the “gulp_shells” input option. GULP optimisation are at risk of running for an extremely long time., even with the gulp option “timeout” enabled. Therefore, there is a ChemDASH input option “calculator_time_limit” that can be used to terminate GULP calculations after the given number of seconds.
The filepath of the VASP executable should be given as “vasp_executable” in the input file. The settings to be applied to ALL stages of the VASP calculation are listed in the ChemDASH input file as “vasp_settings”, whilst settings to apply to a particular stage of the calculation are given as “vasp_calc_<number>_settings” (e.g., “vasp_calc_1_settings”). The settings required for this input into ChemDASH are the contents of a VASP INCAR file. The format for VASP settings is that of a python dictionary, which consists of a comma–separated list of “<key>:<value>” pairs. For example,
vasp_settings=xc:PBE, prec:Normal, encut:600
The VASP k–points are provided to ChemDASH using the option
“vasp_kpoints”, where one, two or three numbers can be provided to
define a
vasp_settings=Li:_sv, Mg:_pv
Vasp optimisations are run until they successfully converge in a single self-consistent field loop, or they hit the limit provided by the “vasp_max_convergence_calcs” option.
The method of ranking atoms for directed swapping is controlled by the “atom_rankings” input option. For random swapping this should be set as “random”, otherwise set it to “bvs”, “site_pot” or “bvs+” for thye respective methods of directed swapping. Note that the “site_pot” and “bvs+” directed swapping is only supported for GULP, i.e., “calculator=gulp”.
When swapping atoms in ChemDASH, the first choice made is the swap group, which is the set of atoms available for swapping. The possible groups are:
-
cations – non–trivially swap a set of cations,
-
anions – non–trivially swap a set of anions,
-
atoms – non–trivially swap any atoms, but not vacancies,
-
all – non–trivially swap any atoms and vacancies,
-
atoms–vacancies – choose a set of atoms and swap each one with a vacancy.
where the first four groups are the default set of swap groups in ChemDASH. Note that the “all" group differs from the “atoms–vacancies” group in that the “all" group consists of atom–atom swaps and/or atom–vacancy swaps, whereas the “atoms–vacancies” group is restricted to atom–vacancy swaps. In addition, custom swap groups can be specified that enable swaps to be restricted to atoms of particular species, for example, “Sr–O” would restrict swaps to Sr and O atoms, with vacancies are denoted as “X”. Custom swap groups can be constructed from any combination of elements, provided there are at least two elements present in the swap group and all of the elements are present in the structure. The choice of swap groups can be weighted by specifying the weight for each group in dictionary format. If weights are used, then a weight must be specified for each swap group. If no weights are specified, then all swap groups are equally likely to be chosen. An example of the “swap_groups” option is:
swap_groups=cations:1, atoms:1, all:1, Sr-X:2
In this example, ChemDASH can choose between the cations, atoms, all, and Sr-X groups for each swap, with the Sr-X group being twice as likely to be chosen as the others.
| ChemDASH Input file option | Description |
|---|---|
| atom_rankings | The metric used to rank atoms for swapping. Supported values are: "random" (default), "bvs", "bvs+", "site_pot". Note that site potential and bvs+ directed swapping are only supported for gulp. |
| atoms_file | File in which the species, number and oxidation state of the atoms used in this calculation are specified. |
| bvs_file | Raw Bond Valence Sum file for this calculation. Records the bond valence sum for the atoms in each structure. |
| calculator | The materials modelling code used for calculations. Default: gulp |
| calculator_cores | The number of parallel cores used for the calculator. Default: 1. |
| calculator_time_limit | Used in the bash "timeout" command, GULP calculations will automatically terminate after this amount of time has expired. |
| cell_spacing | The spacing between two ANION grid points. Default: 2.0 A0 |
| converge_first_structure | If True, abort the run if the initial structure is not converged. Default: True |
| cp_2d_lattice | Lattice type for anion layers in close packed grids. Supported values are: "oblique" (default) and "centred_rectangular" |
| cp_stacking_sequence | Anion layer stacking sequence for close packed grids. |
| directed_num_atoms | For directed swapping, the number of extra atoms available to choose between from the top of the list for each species. Default: 0 |
| directed_num_atoms_increment | For directed swapping, the amount by which to increase (decrease) the number of extra values available to choose between from the top of the list for each species when a structure is (not) repeated. Default: 0 |
| energy_file | Energy file for this calculation. Records the structure number, energies and volumes of accepted structures. |
| energy_step_file | Energy step file for this calculation. Records the structure number, energies and volumes of accepted structures for plotting. |
| force_vacancy_swaps | If True, vacancies cannot swap with each other, they must be replaced by atoms. Default: True. |
| grid_points | The number of points on each dimension of the ANION grid, to form an a x b x c grid for anions (cation points defined by grid type). Default: 2x2x2 |
| grid_type | Initial layout of cation and anion grids. Supported values are "orthorhombic" (default), rocksalt", close_packed". Default: "orthorhombic". |
| gulp_calc_1_keywords | Comma-separated list of keywords for first GULP calculation. Default: None |
| gulp_calc_1_max_gnorm | If specified, terminate a GULP calculation if the final gnorm exceeds this value after the first stage. |
| gulp_calc_1_options | Options for first GULP calculation. Default: None |
| gulp_calc_2_keywords | Comma-separated list of keywords for second GULP calculation. Default: None |
| gulp_calc_2_max_gnorm | If specified, terminate a GULP calculation if the final gnorm exceeds this value after the second stage. |
| gulp_calc_2_options | Options for second GULP calculation. Default: None |
| gulp_calc_3_keywords | Comma-separated list of keywords for third GULP calculation. Default: None |
| gulp_calc_3_max_gnorm | If specified, terminate a GULP calculation if the final gnorm exceeds this value after the third stage. |
| gulp_calc_3_options | Options for third GULP calculation. Default: None |
| gulp_calc_4_keywords | Comma-separated list of keywords for fourth GULP calculation. Default: None |
| gulp_calc_4_max_gnorm | If specified, terminate a GULP calculation if the final gnorm exceeds this value after the fourth stage. |
| gulp_calc_4_options | Options for fourth GULP calculation. Default: None |
| gulp_calc_5_keywords | Comma-separated list of keywords for fifth GULP calculation. Default: None |
| gulp_calc_5_max_gnorm | If specified, terminate a GULP calculation if the final gnorm exceeds this value after the fifth stage. |
| gulp_calc_5_options | Options for fifth GULP calculation. Default: None |
| gulp_executable | The filepath of the GULP executable to be used. Default: "./gulp". |
| gulp_files | Strings appended to each of the GULP files used to distinguish each calculation. |
| gulp_keywords | Comma-separated list of keywords for all GULP calculations. Default: "opti, pot" |
| gulp_library | Library file containing the forcefield to be used in GULP calculations. NOTE -- this takes precedence over a library specified in "gulp_options". |
| gulp_options | Options for all GULP calculations. Default: None |
| gulp_shells | List of atoms to have a shell attached. |
| initial_structure_file | If specified, read in the initial structure from this cif file. |
| max_structures | This run of the code will terminate after this number of structures have been considered in this and all previous runs. |
| neighbourhood_atom_distance_limit | The minimum distance allowed between atoms in the local combinatorial neighbourhood method. Default: 1.0 |
| num_calc_stages | Number of GULP/VASP calculations to be run for each structure. Default: 1. |
| num_neighbourhood_points | The number of points used along each axis in the local combinatorial neighbourhood method. Default: 1 |
| num_structures | The number of structures we will consider in this run of the code. |
| number_weightings | The method used to construct the weightings used to choose the number of atoms to swap. Supported values are "arithmetic" (default), "geometric", "uniform", and "pinned_pair". |
| output_file | Output file for this calculation. Records the swaps for each structure, energies and acceptances. |
| output_trajectory | If true, write ASE trajectory files. Default: True |
| pair_weighting | The initial proportional probability of swapping 2 atoms compared to any other number when using the "pinned_pair" option for "number_weightings". Default: 1.0 |
| pair_weighting_scale_factor | The factor by which we increase the proportional probability of swapping 2 atoms compared to any other number when we explore new basins (we decrease by the inverse factor for repeated basins) when using the "pinned_pair" option for "number_weightings". Default: 1.0 |
| potential_derivs_file | Potential derivs file for this calculation. Records the resolved derivatives of the site potentials for each structure. |
| potentials_file | Potentials file for this calculation. Records the site potentials for each structure. |
| random_seed | The value used to seed the random number generator. Alternatively, the code can generate one itself, which is the default behaviour. |
| restart | If True, use data in a numpy archive (specified by restart_file keyword) to continue a previous run. Default: False |
| restart_file | Name of the numpy archive from which to read data in order to continue a previous run. |
| rng_warm_up | Number of values from the RNG to generate and discard after seeding the generator. Default: 0. |
| save_outcar | If True, retain the final OUTCAR file from each structure optimised with VASP as "OUTCAR_[structure_index]". Default: False. |
| search_local_neighbourhood | If True, uses the local combinatorial neighbourhood method to try and lower the energy of structures prior to relaxation. Default: False |
| seed_bits | The number of bits used in the seed of the random number generator, The allowed values are 32 and 64. Default: 64 |
| swap_groups | The groups of atoms that can be involved in swaps. The default groups are: "cations", "anions", "atoms", and "all" (atoms and vacancies). The input can include these, the additional swap group "atoms-vacancies" (always swap atoms with vacancies), or any custom swap group in the format [Chemical Symbol]-[Chemical Symbol]-[Chemical Symbol]. . . e.g., "Sr-X". A weighting can also be specified for each group as follows: "cations:1, atoms:2, all:3". |
| temp | The Monte-Carlo temperature (strictly, the value of kT in eV). Determines whether swaps to basins of higher energy are accepted. Default: 0.0 |
| temp_scale_factor | The factor by which we increase the temperature after rejected structures (we decrease by the inverse factor for accepted structures). Default: 1.0 |
| update_atoms | If true, swap atoms based on relaxed structures, rather than initial structures. Default: True. |
| vacancy_exclusion_radius | The minimum allowable distance between an atom and a vacancy on the vacancy grid. Default: 2.0 A0 |
| vacancy_grid | If true, apply vacancy grids to each structure in which we will swap atoms. Default: True. |
| vacancy_separation | The nearest neighbour distance between two vacancies on the vacancy grid. Default: 1.0 A0 |
| vasp_calc_1_settings | Settings for the first stage of the VASP calculation. Default: None. |
| vasp_calc_2_settings | Settings for the second stage of the VASP calculation. Default: None. |
| vasp_calc_3_settings | Settings for the third stage of the VASP calculation. Default: None. |
| vasp_calc_4_settings | Settings for the fourth stage of the VASP calculation. Default: None. |
| vasp_calc_5_settings | Settings for the fifth stage of the VASP calculation. Default: None. |
| vasp_executable | The filepath of the vasp executable to be used. Default: "./vasp" |
| vasp_kpoints | Number of k points to use in VASP calculations. Default: 1 |
| vasp_max_convergence_calcs | Maximum number of VASP calculations performed in the final stage for convergence -- we abandon the calculation after this. Default: 10. |
| vasp_pp_dir | Path to directory containing VASP pseudopotential files. Default: ".". |
| vasp_pp_setups | Pseudopotential file extensions for each element. |
| vasp_settings | Settings for all VASP calculations. Default: None. |
| verbosity | Controls the level of detail in the output. Valid options are: "verbose", "terse". Default: "verbose" |