Skip to content

A tool for scale and performance testing of HDFS with a specific focus on the NameNode.

License

Notifications You must be signed in to change notification settings

linkedin/dynamometer

Repository files navigation

Dynamometer Build Status

Dynamometer in Hadoop

Please be aware that Dynamometer has now been committed into Hadoop itself in the JIRA ticket HDFS-12345. It is located under the hadoop-tools/hadoop-dynamometer submodule. This GitHub project will continue to be maintained for testing against the 2.x release line of Hadoop, but all versions of Dynamometer which work with Hadoop 3 will only appear in Hadoop, and future development will primarily occur there.

Overview

Dynamometer is a tool to performance test Hadoop's HDFS NameNode. The intent is to provide a real-world environment by initializing the NameNode against a production file system image and replaying a production workload collected via e.g. the NameNode's audit logs. This allows for replaying a workload which is not only similar in characteristic to that experienced in production, but actually identical.

Dynamometer will launch a YARN application which starts a single NameNode and a configurable number of DataNodes, simulating an entire HDFS cluster as a single application. There is an additional workload job run as a MapReduce job which accepts audit logs as input and uses the information contained within to submit matching requests to the NameNode, inducing load on the service.

Dynamometer can execute this same workload against different Hadoop versions or with different configurations, allowing for the testing of configuration tweaks and code changes at scale without the necessity of deploying to a real large-scale cluster.

Throughout this documentation, we will use "Dyno-HDFS", "Dyno-NN", and "Dyno-DN" to refer to the HDFS cluster, NameNode, and DataNodes (respectively) which are started inside of a Dynamometer application. Terms like HDFS, YARN, and NameNode used without qualification refer to the existing infrastructure on top of which Dynamometer is run.

Requirements

Dynamometer is based around YARN applications, so an existing YARN cluster will be required for execution. It also requires an accompanying HDFS instance to store some temporary files for communication.

Please be aware that Dynamometer makes certain assumptions about HDFS, and thus only works with certain versions. As discussed at the start of this README, this project only works with Hadoop 2; support for Hadoop 3 is introduced in the version of Dynamometer within the Hadoop repository. Below is a list of known supported versions of Hadoop which are compatible with Dynamometer:

  • Hadoop 2.7 starting at 2.7.4
  • Hadoop 2.8 starting at 2.8.4

Hadoop 2.8.2 and 2.8.3 are compatible as a cluster version on which to run Dynamometer, but are not supported as a version-under-test.

Building

Dynamometer consists of three main components:

  • Infrastructure: This is the YARN application which starts a Dyno-HDFS cluster.
  • Workload: This is the MapReduce job which replays audit logs.
  • Block Generator: This is a MapReduce job used to generate input files for each Dyno-DN; its execution is a prerequisite step to running the infrastructure application.

They are built through standard Gradle means, i.e. ./gradlew build. This project uses the Gradle wrapper In addition to compiling everything, this will generate a distribution tarball, containing all necessary components for an end user, at build/distributions/dynamometer-VERSION.tar (a zip is also generated; their contents are identical). This distribution does not contain any Hadoop dependencies, which are necessary to launch the application, as it assumes Dynamometer will be run from a machine which has a working installation of Hadoop. To include Dynamometer's Hadoop dependencies, use build/distributions/dynamometer-fat-VERSION.tar.

Usage

Scripts discussed below can be found in the bin directory of the distribution. The corresponding Java JAR files can be found in the lib directory.

Preparing Requisite Files

A number of steps are required in advance of starting your first Dyno-HDFS cluster:

  • Collect an fsimage and related files from your NameNode. This will include the fsimage_TXID file which the NameNode creates as part of checkpointing, the fsimage_TXID.md5 containing the md5 hash of the image, the VERSION file containing some metadata, and the fsimage_TXID.xml file which can be generated from the fsimage using the offline image viewer:

    hdfs oiv -i fsimage_TXID -o fsimage_TXID.xml -p XML
    

    It is recommended that you collect these files from your Secondary/Standby NameNode if you have one to avoid placing additional load on your Active NameNode.

    All of these files must be placed somewhere on HDFS where the various jobs will be able to access them. They should all be in the same folder, e.g. hdfs:///dyno/fsimage.

    All these steps can be automated with the upload-fsimage.sh script, e.g.:

    ./bin/upload-fsimage.sh 0001 hdfs:///dyno/fsimage
    

    Where 0001 is the transaction ID of the desired fsimage. See usage info of the script for more detail.

  • Collect the Hadoop distribution tarball to use to start the Dyno-NN and -DNs. For example, if testing against Hadoop 2.7.4, use hadoop-2.7.4.tar.gz. This distribution contains several components unnecessary for Dynamometer (e.g. YARN), so to reduce its size, you can optionally use the create-slim-hadoop-tar.sh script:

    ./bin/create-slim-hadoop-tar.sh hadoop-VERSION.tar.gz
    

    The Hadoop tar can be present on HDFS or locally where the client will be run from. Its path will be supplied to the client via the -hadoop_binary_path argument.

    Alternatively, if you use the -hadoop_version argument, you can simply specify which version you would like to run against (e.g. '2.7.4') and the client will attempt to download it automatically from an Apache mirror. See the usage information of the client for more details.

  • Prepare a configuration directory. You will need to specify a configuration directory with the standard Hadoop configuration layout, e.g. it should contain etc/hadoop/*-site.xml. This determines with what configuration the Dyno-NN and -DNs will be launched. Configurations that must be modified for Dynamometer to work properly (e.g. fs.defaultFS or dfs.namenode.name.dir) will be overridden at execution time. This can be a directory if it is available locally, else an archive file on local or remote (HDFS) storage.

Execute the Block Generation Job

This will use the fsimage_TXID.xml file to generate the list of blocks that each Dyno-DN should advertise to the Dyno-NN. It runs as a MapReduce job.

./bin/generate-block-lists.sh
    -fsimage_input_path hdfs:///dyno/fsimage/fsimage_TXID.xml
    -block_image_output_dir hdfs:///dyno/blocks
    -num_reducers R
    -num_datanodes D

In this example, the XML file uploaded above is used to generate block listings into hdfs:///dyno/blocks. R reducers are used for the job, and D block listings are generated - this will determine how many Dyno-DNs are started in the Dyno-HDFS cluster.

Prepare Audit Traces (Optional)

This step is only necessary if you intend to use the audit trace replay capabilities of Dynamometer; if you just intend to start a Dyno-HDFS cluster you can skip to the next section.

The audit trace replay accepts one input file per mapper, and currently supports two input formats, configurable via the auditreplay.command-parser.class configuration.

The default is a direct format, com.linkedin.dynamometer.workloadgenerator.audit.AuditLogDirectParser. This accepts files in the format produced by a standard configuration audit logger, e.g. lines like:

1970-01-01 00:00:42,000 INFO FSNamesystem.audit: allowed=true	ugi=hdfs	ip=/127.0.0.1	cmd=open	src=/tmp/foo	dst=null	perm=null	proto=rpc

When using this format you must also specify auditreplay.log-start-time.ms, which should be (in milliseconds since the Unix epoch) the start time of the audit traces. This is needed for all mappers to agree on a single start time. For example, if the above line was the first audit event, you would specify auditreplay.log-start-time.ms=42000.

The other supporter format is com.linkedin.dynamometer.workloadgenerator.audit.AuditLogHiveTableParser. This accepts files in the format produced by a Hive query with output fields, in order:

  • relativeTimestamp: event time offset, in milliseconds, from the start of the trace
  • ugi: user information of the submitting user
  • command: name of the command, e.g. 'open'
  • source: source path
  • dest: destination path
  • sourceIP: source IP of the event

Assuming your audit logs are available in Hive, this can be produced via a Hive query looking like:

INSERT OVERWRITE DIRECTORY '${outputPath}'
SELECT (timestamp - ${startTimestamp} AS relativeTimestamp, ugi, command, source, dest, sourceIP
FROM '${auditLogTableLocation}'
WHERE timestamp >= ${startTimestamp} AND timestamp < ${endTimestamp}
DISTRIBUTE BY src
SORT BY relativeTimestamp ASC;

Start the Infrastructure Application & Workload Replay

At this point you're ready to start up a Dyno-HDFS cluster and replay some workload against it! Note that the output from the previous two steps can be reused indefinitely.

The client which launches the Dyno-HDFS YARN application can optionally launch the workload replay job once the Dyno-HDFS cluster has fully started. This makes each replay into a single execution of the client, enabling easy testing of various configurations. You can also launch the two separately to have more control. Similarly, it is possible to launch Dyno-DNs for an external NameNode which is not controlled by Dynamometer/YARN. This can be useful for testing NameNode configurations which are not yet supported (e.g. HA NameNodes). You can do this by passing the -namenode_servicerpc_addr argument to the infrastructure application with a value that points to an external NameNode's service RPC address.

Manual Workload Launch

First launch the infrastructure application to begin the startup of the internal HDFS cluster, e.g.:

./bin/start-dynamometer-cluster.sh
    -hadoop_binary_path hadoop-2.7.4.tar.gz
    -conf_path my-hadoop-conf
    -fs_image_dir hdfs:///fsimage
    -block_list_path hdfs:///dyno/blocks

This demonstrates the required arguments. You can run this with the -help flag to see further usage information.

The client will track the Dyno-NN's startup progress and how many Dyno-DNs it considers live. It will notify via logging when the Dyno-NN has exited safemode and is ready for use.

At this point, a workload job (map-only MapReduce job) can be launched, e.g.:

./bin/start-workload.sh
    -Dauditreplay.input-path=hdfs:///dyno/audit_logs/
    -Dauditreplay.output-path=hdfs:///dyno/results/
    -Dauditreplay.num-threads=50
    -nn_uri hdfs://namenode_address:port/
    -start_time_offset 5m
    -mapper_class_name AuditReplayMapper

The type of workload generation is configurable; AuditReplayMapper replays an audit log trace as discussed previously. The AuditReplayMapper is configured via configurations; auditreplay.input-path, auditreplay.output-path and auditreplay.num-threads are required to specify the input path for audit log files, the output path for the results, and the number of threads per map task. A number of map tasks equal to the number of files in input-path will be launched; each task will read in one of these input files and use num-threads threads to replay the events contained within that file. A best effort is made to faithfully replay the audit log events at the same pace at which they originally occurred (optionally, this can be adjusted by specifying auditreplay.rate-factor which is a multiplicative factor towards the rate of replay, e.g. use 2.0 to replay the events at twice the original speed).

The AuditReplayMapper will output the benchmark results to a file part-r-00000 in the output directory in CSV format. Each line is in the format user,type,operation,numops,cumulativelatency, e.g. hdfs,WRITE,MKDIRS,2,150.

Integrated Workload Launch

To have the infrastructure application client launch the workload automatically, parameters for the workload job are passed to the infrastructure script. Only the AuditReplayMapper is supported in this fashion at this time. To launch an integrated application with the same parameters as were used above, the following can be used:

./bin/start-dynamometer-cluster.sh
    -hadoop_binary hadoop-2.7.4.tar.gz
    -conf_path my-hadoop-conf
    -fs_image_dir hdfs:///fsimage
    -block_list_path hdfs:///dyno/blocks
    -workload_replay_enable
    -workload_input_path hdfs:///dyno/audit_logs/
    -workload_output_path hdfs:///dyno/results/
    -workload_threads_per_mapper 50
    -workload_start_delay 5m

When run in this way, the client will automatically handle tearing down the Dyno-HDFS cluster once the workload has completed. To see the full list of supported parameters, run this with the -help flag.