Gigabyte G1.Sniper M7 Hackintosh

Opencore Bootloader EFI and config.plist file with all required Drivers and Kexts for Gigabyte G1.Sniper M7. Should work with Both Skylake & Kaby Lake. (Only Tested With Skylake i5-6500).

SET TURN DISPLAY OFF AFTER to Never in Energy Saver settings as once turned off, display can't power back on.

Included Software Versions

OpenCore - 0.6.2

AppleALC - 1.5.3

IntelMausi - 1.0.4

Lilu - 1.4.8

VirtualSMC - 1.1.7

WhateverGreen - 1.4.3

BIOS SETTINGS

OS Mode: Other OS with UEFI Only or, Windows 8/10 (CSM Disabled)

Secure Boot: Disabled

Aboce 4G Decode: Enabled

SuperIO: Disabled

VD-x: Enabled

VT-d: You can leave it disabled or enable it if you need it for Other OS. (MacOS can't/doesn't use VT-d)

What's Working

1. Boot Logo
2. Onboard Audio
3. Hardware Decoding using iGPU
4. Xcode and Android Studio
5. Netflix on 720p
6. Tested with macOS 10.15.7 (Latest Build)

What's NOT Working

1. Sleep Mode (Display can't power on)
2. Monitor Energy Saver (Same issue as 1)
3. DRM (iGPU DRM broken since 10.12.2)

What's Not Tested

1. iServices

My Hardware Config

• CPU: Intel Core i5-6500
• Motherboard: Gigabyte G1.Sniper M7 (B150 Chipset)
• RAM: 2x8GB G.Skill Ripjaws X
• SSD: Netac 256GB NVMe SSD

Licenses & Attribution

Most of the Included stuffs here are BSD-3-Clause Licensed and developed by acidanthera developers and other open source community developers. Config files and EFI partition prepared by following dortania - Hackintosh Guides and some trial & errors.

Enjoy.