Skip to content

PCB design and firmware for Wi-Fi controlled LED dimmer

Notifications You must be signed in to change notification settings

kasedy/esp8266-wifi-led-dimmer

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

72 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

WiFi controlled LED switch / dimmer

The controller is designed to have extra small size (22x26x14mm), and costs under $2 per item. Four independent channels allow to create lamps with different blink effects or control RGB led strip.

Based on ESP8266-01 microcontroller
Repository store firmware for WiFi controlled LED lamp
Works with homeassistant
Supports effects
Allows to dim light
Dimming based on PWM
May work as a WiFi switch

Assembling instructions

Assembling LED dimming switch controller

Eagle project for pcb manufactering

Design Description
Light SOT32 Uses SOT32 MOSFET's mounted under voltage regultar.
Light SOT32 bottom Uses SOT32 MOSFET's mounted on the other side of the board.
Light TO-220 Uses TO220 MOSFET's for long led strips that requere high power.
Panelized Contains all 3 kind of boards replicated 4 times. Archive contains all necessary files for a manufacterer. Board size does not exceed 100X100mm. It is the smalles and cheappes size. Could be ordered from jlcpcb.com for $2.

Light SOT32 and Light SOT32 bottom are low power versions of the board. It can handle up to 2A per chanel. When Light TO-220 is a high power board with up to 15A per channel.

Parts required for one module

Part Amount
Microcontroller Esp8266-01 1
MOSFET ao3400 (for low power board version) 4
MOSFET P55NF06L (for high power board version) 4
Buck converter Mini 360 1
SMD resistor 0805 10kOh 2
Pin Header 2x4 2.54mm 1
Terminal KF350-2P and KF350-3P 2
Terminal KF350-3P 1
Male single row pin 2.54mm 4

Panelized PCB

Wiring schema