Skip to content

jcuga/pianobar-remote-control

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

pianobar-remote-control

No-frills, web-based remote controll for pianobar.

Motivation

To be able to control (skip/volume/select-station) from web/phone while away from the machine playing music. Or maybe pianobar is running on a headless machine like a raspberry pi.

Requirements

To run:

  • pianobar already installed, as this will call pianobar under the hood.

To build from source:

Usage

Run pianobar-rc and it will play music via pianobar, and then you can visit http://127.0.0.1:7890 or the device's IP at :7890 to open the remote control.

$ ./pianobar-rc -h

Usage of ./pianobar-rc:
  -delay uint
    	Delay --delay seconds before starting pianobar (default 0). Allows time for networking to start on boot if auto-running.
  -hardban
    	If set, the 'ban' button does a perm ban instead of 1 month. (issues ban instead of tired command).
  -http string
    	Listen address for serving web remote control. (default "0.0.0.0:7890")
  -m uint
    	Max number of stations/how high next-channel goes before wraps back to 0. (default 10)
  -p string
    	Password
  -paused
    	Start paused. Useful if auto-starting this program on boot but don't want to play until first use.
  -s uint
    	Default station number on start.
  -u string
    	Username

Minimum with defaults:

$ ./pianobar-rc -u [email protected] -p Password123

2022/01/21 19:45:51 Listening on http://0.0.0.0:7890, playing station: 0 of 10. Hard-ban: false

But you'll want to at least specify the max number of channels you can cycle through and which to start at:

./pianobar-rc -u [email protected] -p Password123 -s 12 -m 40

2022/01/21 19:48:38 Listening on http://0.0.0.0:7890, playing station: 12 of 40. Hard-ban: false

Building

go build -o pianobar-rc main.go

Developing

go fmt ./... && go vet ./... && go build -o pianobar-rc main.go

Releases

0.1

Initial release!

Cross Compiled Releases

RELEASE=0.1
osArray=("linux" "darwin")
archArray=("386" "amd64" "arm" "arm64")

for i in ${!osArray[@]}; do
  for j in ${!archArray[@]}; do

    GOOS=${osArray[$i]} GOARCH=${archArray[$j]} go build -o pianobar-rc-${RELEASE}-${osArray[$i]}-${archArray[$j]} main.go

  done
done

About

super-simple web remote control for pianobar

Topics

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages