Terraform AWS VPC Auto Peering Lambda

A Terraform module for automatically peering VPCs based on dependency information stored in tags.

The VPC auto peering lambda requires:

• An SNS topic which receives events whenever a VPC is created or destroyed
• A role to assume in order to create or destroy the peering connection and routes

The VPC auto peering lambda consists of:

• A lambda function which responds to VPC lifecycle events on the SNS topic
• A subscription to the SNS topic
• IAM roles and policies allowing the lambda to function

The VPC auto peering lambda:

• automatically configures VPC peering both within and across regions and both within and across accounts; and
• configures unidirectional or bidirectional routing between the peered VPCs, as required.

Architecture

The VPC auto-peering lambda automatically creates peering connections and routes between VPCs based on relationships declared by each VPC via tags. In order to achieve this, the lambda needs to know when VPCs are provisioned and destroyed.

Since AWS doesn't provide any built in events for VPC lifecycle, the lambda relies on an alternative approach for such events, as provided by the terraform-aws-vpc-lifecycle-event and terraform-aws-infrastructure-events modules.

The terraform-aws-infrastructure-events module uses S3 objects to represent provisions and destroys of pieces of infrastructure, converting the corresponding object creations and deletions into messages in an SNS topic. In this way, Terraform configurations can signal changes to infrastructure by creating or deleting an S3 object whose key includes information about that infrastructure.

The terraform-aws-vpc-lifecycle-event module uses this mechanism to notify of a VPC lifecycle change, such as when a VPC is provisioned or destroyed.

The diagram below shows how these modules work together:

Note that for this to work, the terraform-aws-infrastructure-events and terraform-aws-vpc-auto-peering-lambda modules should be created in one Terraform configuration while the terraform-aws-vpc-lifecycle-event module should be used in the configuration that manages the VPC.

In addition to the event infrastructure, the VPC auto peering lambda also needs a role to be available in each of the accounts in which it should manage peering, with the same name. The terraform-aws-vpc-auto-peering-role module can provision a role with the required policy.

The terraform-aws-vpc-auto-peering-lambda module additionally expects a certain tag protocol to be followed on created VPCs and route tables as described in the Implementation section below. The terraform-aws-base-networking module implements this protocol and is designed to work with this module.

Implementation

Declaring dependencies

The dependents and dependencies of each VPC are defined in terms of the VPC's "component deployment identifier" which is the concatenation of the values of the Component and DeploymentIdentifier tags on the VPC. For example, given a VPC with the following tags:

resource "aws_vpc" "vpc_1" {
  // ...

  tags = {
    Component            = "application-network"
    DeploymentIdentifier = "development-1"
    // ...
  }
}

the component deployment identifier would be "application-network-development-1".

Using these component deployment identifiers, VPC dependencies are then defined using the Dependencies tag. For example, in the following, vpc_1 is both dependent on vpc_2 and vpc_3 and is also a dependency of vpc_3:

resource "aws_vpc" "vpc_1" {
  // ...

  tags = {
    Component            = "application-network"
    DeploymentIdentifier = "development-1"
    Dependencies         = "integration-network-development-1, connectivity-network-development-1"
    // ...
  }
}

resource "aws_vpc" "vpc_2" {
  // ...

  tags = {
    Component            = "integration-network"
    DeploymentIdentifier = "development-1"
    // ...
  }
}

resource "aws_vpc" "vpc_3" {
  // ...

  tags = {
    Component            = "connectivity-network"
    DeploymentIdentifier = "development-1"
    Dependencies         = "application-network-development-1"
    // ...
  }
}

As can be seen in the example above, the Dependencies tag value is a comma separated string of component deployment identifiers (whitespace ignored), allowing more than one dependency to be defined.

On VPC provisioning

Upon receiving an event indicating VPC creation, the VPC auto peering lambda looks up both the created VPC based on the account ID and VPC ID in the VPC lifecycle event as well as all other VPCs within its search regions and accounts. Using the discovered VPCs, it determines the set of VPCs dependent on the newly created VPC and the set of VPCs on which the newly created VPC depends.

Once the set of dependencies and dependents has been determined, the auto peering lambda requests and accepts peering connections to satisfy the overall dependencies given the introduction of the new VPC. For the example given in declaring dependencies above, if vpc_1 had just been created, peering connections would be established between vpc_1 and vpc_2 as well as between vpc_1 and vpc_3.

Once peering connections have been established, the auto peering lambda creates a route for each defined dependency in any route tables found in the dependent VPC that have a Tier tag with value "private". When doing so, the auto peering lambda uses the full CIDR of each VPC within the route definition.

In this way, any routing between VPCs is only bidirectional if both VPCs declare a dependency on each other, otherwise the routing is unidirectional. For the example given in declaring dependencies above, a route will be created in each of vpc_1's private route tables to each of vpc_2 and vpc_3's CIDRs. A route will also be created in vpc_3's private route tables back to vpc_1's CIDR. However, no route will be created in vpc_2's private route tables.

On VPC destruction

Upon receiving an event indicating VPC deletion, the VPC auto peering lambda performs the reverse operation. It looks up both the deleted VPC based on the account ID and VPC ID in the VPC lifecycle event as well as all other VPCs within its search regions and accounts. Using the discovered VPCs, it determines the set of VPCs that were dependent on the newly deleted VPC and the set of VPCs on which the deleted VPC depended.

Using this information, the auto peering lambda deletes the corresponding routes from the private route tables of any VPCs that previously had a relationship with the deleted VPC, before deleting any peering connections.

Usage

To use the module, include something like the following in your Terraform configuration:

module "vpc-auto-peering" {
  source  = "infrablocks/vpc-auto-peering/aws"
  version = "2.0.0"

  region                = "eu-west-2"
  deployment_identifier = "1bc5defe"

  search_regions    = ["eu-west-2", "us-east-1"]
  search_accounts   = ["554132201093", "554132201093"]
  peering_role_name = "auto-peering-role"

  infrastructure_events_topic_arn = "arn:aws:sns:eu-west-2:579878096224:infrastructure-events-topic-eu-west-2-335e1e54"
}

Note:

• If the search_regions variable is not supplied, it defaults to the value of the region variable, i.e., the region in which the lambda is deployed
• If the search_accounts variable is not supplied, it defaults to the account in which the lambda is deployed
• If the peering_role_name variable is not supplied, it defaults to "vpc-auto-peering-role" which is the name of the role created by the terraform-aws-vpc-auto-peering-role module.

See the Terraform registry entry for more details.

Inputs

Name	Description	Default	Required
region	The region into which the VPC auto peering lambda is being deployed.	-	Yes
deployment_identifier	An identifier for this instantiation.	-	Yes
infrastructure_events_topic_arn	The ARN of the SNS topic containing VPC events.	-	Yes
search_regions	AWS regions to search for dependency and dependent VPCs.	[]	No
search_accounts	IDs of AWS accounts to search for dependency and dependent VPCs.	[]	No
peering_role_name	The name of the role to assume to create peering relationships and routes.	""	No

Outputs

Name	Description
lambda_role_arn	The ARN of the created lambda.

Compatibility

This module is compatible with Terraform versions greater than or equal to Terraform 1.0.

Development

Machine Requirements

In order for the build to run correctly, a few tools will need to be installed on your development machine:

• Ruby (3.1.1)
• Bundler
• git
• git-crypt
• gnupg
• direnv
• aws-vault

Mac OS X Setup

Installing the required tools is best managed by homebrew.

To install homebrew:

ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

Then, to install the required tools:

# ruby
brew install rbenv
brew install ruby-build
echo 'eval "$(rbenv init - bash)"' >> ~/.bash_profile
echo 'eval "$(rbenv init - zsh)"' >> ~/.zshrc
eval "$(rbenv init -)"
rbenv install 3.1.1
rbenv rehash
rbenv local 3.1.1
gem install bundler

# git, git-crypt, gnupg
brew install git
brew install git-crypt
brew install gnupg

# aws-vault
brew cask install

# direnv
brew install direnv
echo "$(direnv hook bash)" >> ~/.bash_profile
echo "$(direnv hook zsh)" >> ~/.zshrc
eval "$(direnv hook $SHELL)"

direnv allow <repository-directory>

Running the build

Running the build requires an AWS account and AWS credentials. You are free to configure credentials however you like as long as an access key ID and secret access key are available. These instructions utilise aws-vault which makes credential management easy and secure.

To provision module infrastructure, run tests and then destroy that infrastructure, execute:

aws-vault exec <profile> -- ./go

To provision the module prerequisites:

aws-vault exec <profile> -- ./go deployment:prerequisites:provision[<deployment_identifier>]

To provision the module contents:

aws-vault exec <profile> -- ./go deployment:root:provision[<deployment_identifier>]

To destroy the module contents:

aws-vault exec <profile> -- ./go deployment:root:destroy[<deployment_identifier>]

To destroy the module prerequisites:

aws-vault exec <profile> -- ./go deployment:prerequisites:destroy[<deployment_identifier>]

Configuration parameters can be overridden via environment variables:

DEPLOYMENT_IDENTIFIER=testing aws-vault exec <profile> -- ./go

When a deployment identifier is provided via an environment variable, infrastructure will not be destroyed at the end of test execution. This can be useful during development to avoid lengthy provision and destroy cycles.

By default, providers will be downloaded for each terraform execution. To cache providers between calls:

TF_PLUGIN_CACHE_DIR="$HOME/.terraform.d/plugin-cache" aws-vault exec <profile> -- ./go

Common Tasks

Generating an SSH key pair

To generate an SSH key pair:

ssh-keygen -m PEM -t rsa -b 4096 -C [email protected] -N '' -f config/secrets/keys/bastion/ssh

Generating a self-signed certificate

To generate a self signed certificate:

openssl req -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem -days 365

To decrypt the resulting key:

openssl rsa -in key.pem -out ssl.key

Add a git-crypt user

To adding a user to git-crypt using their GPG key:

gpg --import ~/path/xxxx.pub
git-crypt add-gpg-user --trusted GPG-USER-ID

Managing CircleCI keys

To encrypt a GPG key for use by CircleCI:

openssl aes-256-cbc \
  -e \
  -md sha1 \
  -in ./config/secrets/ci/gpg.private \
  -out ./.circleci/gpg.private.enc \
  -k "<passphrase>"

To check decryption is working correctly:

openssl aes-256-cbc \
  -d \
  -md sha1 \
  -in ./.circleci/gpg.private.enc \
  -k "<passphrase>"

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/infrablocks/terraform-aws-vpc-auto-peering-lambda. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the Contributor Covenant code of conduct.

License

The library is available as open source under the terms of the MIT License.