README.changes.md: v19.07.8

Signed-off-by: Artem Lapkin <[email protected]>

OpenWrt Khadas rel 0.77

OpenWrt Khadas rel 0.77

• u-boot updated
• linux kernel updated 5.13x
• soc watchdog activated
• nvme bootable
• fix hdmi + nvme bug
• updated openwrt base to 19.07.7

Khadas Vims OpenWrt 19.07.0-rc2 v0.5

Current Stable Release Candidate - OpenWrt 19.07.0-rc2

• images for VIM1 VIM2 VIM3 VIM3L
• https://forum.openwrt.org/t/openwrt-19-07-0-second-release-candidate/49593

CHANGES OpenWrt rel 0.5

• add VIM3 and VIM3L initial support (without on board wifi)
• add new kernel for VIM3L
• prepare build scripts for openwrt 19.07.2 series
• add RTL8153 Gigabit Ethernet Adapterv ( USB3.0 - 0bda:8153 - r8152 )
• USB3.0 expand ready
• network config add - USB eth1 bridged with usb0 as LAN
• https://github.com/hyphop/khadas-openwrt/releases/tag/19.07.0-rc2

Khadas Vims OpenWrt 19.07.0-rc1 v0.4

Khadas Vims OpenWrt 19.07.0-rc1 rel 0.4

• add SQM support https://openwrt.org/docs/guide-user/network/traffic-shaping/sqm
• rebuild linux kernel and modules config
• improve build scripts | scripts/build +server - build server variant
• prepare build scripts for openwrt 19.07.X series cat scripts/build_last_rel.md
• add NFS-kernel-server only for 19.07.X server series - nfsd_test script test

NOTES: https://openwrt.org/releases/19.07/notes-19.07.0-rc1

Khadas Vims OpenWrt v0.3

Khadas Vims OpenWrt rel 0.3

• added support for VIM2 ( with wifi chip AP6356S VIM2.V14 tested )
• preinstalled samba, mdns, ttyd, thd + many other packages
• fix ethernet for VIM2, but still not possible reinit ethernet interface for VIM2
• improve startup speed - now is about 7 sec
• LEDs indicators - supported
• board buttons KEY_F KEY_P - custom usage KEY_F - reset wifi | KEY_P - power off
• initial optimization for Ethernet USB MMC subsystems
• many improves
• change default hostname to openwrt-vim + mdns name to: openwrt-vim.local

Khadas Vims OpenWrt rel 0.2

• usb 3g 4g modems - OK
• improve build scripts
• some changes

khadas vims openwrt

khadas vim1 openwrt

Install

• https://github.com/hyphop/khadas-openwrt/releases/download/0.1/OPENWRT.vim1.vfat.img.gz

cd /tmp
wget https://github.com/hyphop/khadas-openwrt/releases/download/0.1/OPENWRT.vim1.vfat.img.gz
gzip -dc OPENWRT.vim1.vfat.img.gz | sudo dd bs=1M of=/dev/SD_PATH
sync 

openwrt Access info

• no root password
• wifi ap mode enabled - no password
• lan -> usb0 + wlan0 (usb net + wifi AP) in bridge mode
• wan -> eth0 (dhcp)
• serial console enabled -> ttyAML0
• hdmi output -> tty0
• web interface http://172.23.0.1
• ssh [email protected] -p 22

NOTE: blink led mode started if openwrt was successful loaded

NOTE: setup root password and wifi password at fist after installation!

NOTE: usb net connection enabled by default,

NOTE: if vim device powered by usb cable from pc u can have network access to LAN via usb-net without any extra configuration