Description

Python package to read data from Energomera energy meter (possibly supporting others similar) and send over to HomeAssistant using MQTT.

The package has been developed with CE301BY three-phase meter.

Dependencies

• Pending PR to iec62056_21 for transport improvements: pwitab/iec62056-21#29

Quick start

Since there are direct dependencies no package is published on PyPI and you'll need to install it directly from Github:

pip install git+https://github.com/hostcc/energomera-hass-mqtt@master

Usage

usage: energomera-hass-mqtt [-h] [-c CONFIG_FILE]

optional arguments:
 -h, --help            show this help message and exit
 -c CONFIG_FILE, --config-file CONFIG_FILE
    Path to configuration file (default: '/etc/energomera/config.yaml')

Configuration file format

Configuration file is in YAML format and supports following elements:

# (optional) General parameters
general:
    # (bool) default ``false``: perform single processing cycle and
    #  exit
    oneshot:
    # (number) default ``30``: delay in seconds between processing
    #  cycles. Is also used as MQTT keepalive interval upon which the
    #  broker will consider the client disconnected if no response
    intercycle_delay:
    # (string) default ``error``: logging level, one of ``critical``,
    #  ``error``, ``warning``, ``info`` or ``debug``
    logging_level:
    # (bool) default ``false``: if enabled makes parameters a
    # combination of default ones plus those defined in the
    # configuration file, no check for duplicates is performed!
    include_default_parameters:
# Energy meter parameters
meter:
    # (string) Serial port (e.g. /dev/ttyUSB0)
    port:
    # (string) Password to meter for administrative session, manufacturer's
    #  default is '777777'
    password:
    # (number) default ``30``: Timeout for meter communications
    timeout:
# MQTT parameters
mqtt:
    # (string) Hostname or IP address of MQTT broker
    host:
    # (number) default ``1883``: Port of MQTT broker
    port:
    # (string) optional: MQTT user name
    user:
    # (string) optional: MQTT user password
    password:
    # (string) default ``homeassistant``: Preffix to MQTT topic names,
    #  should correspond to one set in HomeAssistant for auto-discovery
    hass_discovery_prefix:
    # (bool) default ``true``: Whether to enable TLS with MQTT broker
    tls:
# (list of mappings) - optional: Energy meter parameters to process and
#  properties of corresponding HASS sensor
parameters:
    - # (string) IEC address (e.g. ``POWEP``)
      address:
      # (string or list) HASS Sensor name for the entry. If IEC address
      #  provides multi-value reponse, this could be a list with the
      #  number of entries equals to number of values in response
      name:
      # (string) Device class of the HASS sensor
      device_class:
      # (string) State class of the HASS sensor
      state_class:
      # (string) Unit of measurement for the HASS sensor
      unit:
      # (string) - optional: Additional data to read the parameter with
      #  (argument to parameter's address)
      additional_data:
      # (string) - optional: Entity name for the HASS sensor, will be
      #  used to generate its unique ID. If omitted the ``address`` is
      #  used instead. Use of this option might be needed if your
      #  configuration contains several entries of meter's parameters
      #  of same address, but with different ``additional_data``
      entity_name:
      # (number) - optional: Zero-based index to pick an entry from
      #  multi-value response to meter's parameter
      response_idx:

Interpolation expressions

parameters section supports following expressions:

• {{ energomera_prev_month }}: Previous month in meter's format, defaults to one month back
• {{ energomera_prev_day }}: Previous day in meter's format, default to one day back

All expressions support passing optional argument as (...) to specify how far interpolated result should go in the past. Whitespaces around the brackets, both inner and outer, are ignored. Specifying empty argument results in using a default value as per interpolation specification above.

For example, {{ energomera_prev_day (5) }} will result in meter-specific timestamp returned for the date being 5 days ago. An use case for that might be intermittent connectivity to the meter where the readings aren't sent to collecting system on cadence thus have gaps in data points.

systemd support

Sample service definition for systemd is provided under systemd/ directory.

Docker support

There are Docker images available if you would like to run it as Docker container - you could use ghcr.io/hostcc/energomera-hass-mqtt:latest or ghcr.io/hostcc/energomera-hass-mqtt:<release version>.

As of writing, the images are built to ARM v6/v7 and ARM64 platforms.

Note

For ARMv6 you might need to specify image variant explicitly, in case the container engine detects it incorrectly and resulting image doesn't run as expected. To do that just add --variant v6 to pull command

To run the program as container you will need to create a directory on the host and put config.yaml relevant to your setup there.

Then, assuming the directory is called config and resides relative to current directory, and the serial port the meter is connected to is /dev/ttyUSB0 the following command will run it

$ docker run --device /dev/ttyUSB0 -v `pwd`/config:/etc/energomera/ \
  ghcr.io/hostcc/energomera-hass-mqtt:latest

Documentation

Please see online documentation for details on the API package provides.