Skip to content
/ proj Public

Rust bindings for the latest stable release of PROJ

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT
Notifications You must be signed in to change notification settings

georust/proj

GitHub Workflow Status

PROJ

Coordinate transformation via bindings to the PROJ v9.4 API.

Two coordinate transformation operations are currently provided: projection (and inverse projection) and conversion.

Projection is intended for transformations between geodetic and projected coordinates and vice versa (inverse projection), while conversion is intended for transformations between projected coordinate systems. The PROJ documentation explains the distinction between these operations in more detail.

This crate depends on libproj v9.4.x, accessed via the proj-sys crate. By default, proj-sys will try to find a pre-existing installation of libproj on your system. If an appropriate version of libproj cannot be found, the build script will attempt to build libproj from source. You may specify a from-source build with the bundled_proj feature.

Out of the box, any (x, y) numeric tuple can be provided as input to proj. You can conform your own types to the Coord trait to pass them in directly and avoid intermediate allocations. There is a geo-types feature, enabled by default, which implements this trait for types in the geo-types crate.

Methods for conversion and projection of slices of Coords are also available.

Examples

Convert from NAD 83 US Survey Feet to NAD 83 Meters Using EPSG Codes

use proj::Proj;

let from = "EPSG:2230";
let to = "EPSG:26946";
let ft_to_m = Proj::new_known_crs(&from, &to, None).unwrap();
let result = ft_to_m
    .convert((4760096.421921f64, 3744293.729449f64))
    .unwrap();
assert_relative_eq!(result.0, 1450880.2910605003);
assert_relative_eq!(result.1, 1141263.0111604529);

Convert from NAD 83 US Survey Feet to NAD 83 Meters Using the pipeline Operator

Note that as of v5.0.0, PROJ uses the pipeline operator, which allows an arbitrary number of steps in a conversion. The example below works as follows:

  • define the operation as a pipeline operation
  • define step 1 as an inverse transform, yielding geodetic coordinates
  • define step 2 as a forward transform to projected coordinates, yielding metres.
use proj::Proj;

let ft_to_m = Proj::new("
    +proj=pipeline
    +step +inv +proj=lcc +lat_1=33.88333333333333
    +lat_2=32.78333333333333 +lat_0=32.16666666666666
    +lon_0=-116.25 +x_0=2000000.0001016 +y_0=500000.0001016001 +ellps=GRS80
    +towgs84=0,0,0,0,0,0,0 +units=us-ft +no_defs
    +step +proj=lcc +lat_1=33.88333333333333 +lat_2=32.78333333333333 +lat_0=32.16666666666666
    +lon_0=-116.25 +x_0=2000000 +y_0=500000
    +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs
").unwrap();

// The Presidio, approximately
let result = ft_to_m.convert((4760096.421921f64, 3744293.729449f64)).unwrap();
assert_relative_eq!(result.0, 1450880.2910605003);
assert_relative_eq!(result.1, 1141263.01116045);

Inverse Projection from Stereo70 to Geodetic

use proj::Proj;

// Carry out an inverse projection from Pulkovo 1942(58) / Stereo70 (EPSG 3844)
// into geodetic lon and lat coordinates (in radians)
let stereo70 = Proj::new("
    +proj=sterea +lat_0=46 +lon_0=25 +k=0.99975 +x_0=500000 +y_0=500000
    +ellps=krass +towgs84=33.4,-146.6,-76.3,-0.359,-0.053,0.844,-0.84
    +units=m +no_defs
    ").unwrap();
let geodetic_radians_point = stereo70.project(
    (500119.70352012233f64, 500027.77896348457f64), true
).unwrap();
assert_relative_eq!(geodetic_radians_point.0, 0.436332, epsilon=1e-5);
assert_relative_eq!(geodetic_radians_point.1, 0.802851, epsiolon=1e-5);

Usage

There are two options for creating a transformation:

  1. If you don't require additional grids or other customisation:
    • Call Proj::new or Proj::new_known_crs. This creates a transformation instance (Proj)
  2. If you require a grid for the transformation you wish to carry out, or you need to customise the search path or the grid endpoint:

Note:

  1. Both ProjBuilder and Proj implement the Info trait, which can be used to get information about the current state of the PROJ instance;
  2. Proj::new() and ProjBuilder::proj() have the same signature;
  3. Proj::new_known_crs() and ProjBuilder::proj_known_crs() have the same signature.

Requirements

By default, the crate requires libproj 9.2.x to be present on your system. While it may be backwards-compatible with older PROJ 6 versions, this is neither tested nor supported. If a suitable library can't be found, proj will attempt to build libproj from source.

Feature Flags

  • geo-types: include trait impls for geo-types. See example.
  • pkg_config: enables the use of pkg-config when linking against libproj — note that pkg-config must be available on your system.
  • bundled_proj: builds libproj from source bundled in the proj-sys crate. Note that this feature requires Sqlite3 and libtiff to be present on your system.
  • network: exposes APIs which, when enabled, can fetch grid data from the internet to improve projection accuracy. See enable_network for details.

Network, Cache, and Search Path Functionality

Grid File Download

proj supports network grid download functionality via the network feature. Network access is disabled by default, and can be activated by passing a true bool to enable_network(). Network functionality status can be queried with network_enabled, and the download endpoint can be queried and set using get_url_endpoint and set_url_endpoint.

Grid File Cache

Up to 300 mb of downloaded grids are cached to save bandwidth: This cache can be enabled or disabled using grid_cache_enable.

Search Path Modification

The path used to search for resource files can be modified using set_search_paths

Conform your own types

If you have your own geometric types, you can conform them to the Coord trait and use proj without any intermediate allocation.

use proj::{Proj, Coord};

struct MyPointOfInterest {
    lat: f64,
    lon: f64,
}

impl Coord<f64> for MyPointOfInterest {
    fn x(&self) -> f64 {
        self.lon
    }
    fn y(&self) -> f64 {
        self.lat
    }
    fn from_xy(x: f64, y: f64) -> Self {
        Self { lon: x, lat: y }
    }
}

let donut_shop = MyPointOfInterest { lat: 34.095620, lon: -118.283555 };

let from = "EPSG:4326";
let to = "EPSG:3309";
let proj = Proj::new_known_crs(&from, &to, None).unwrap();

let result = proj.convert(donut_shop).unwrap();

assert_relative_eq!(result.x(), 158458.67251293268);
assert_relative_eq!(result.y(), -434296.8803996085);

Integration with geo-types

If you've enabled the geo-types feature, you can skip allocating an intermediate representation, and pass the geo-types directly.

use approx::assert_relative_eq;
use proj::Proj;
use geo_types::Point;

let my_point = Point::new(4760096.421921f64, 3744293.729449f64);

let from = "EPSG:2230";
let to = "EPSG:26946";
let nad_ft_to_m = Proj::new_known_crs(&from, &to, None).unwrap();

let result = nad_ft_to_m.convert(my_point).unwrap();

assert_relative_eq!(result.x(), 1450880.2910605003f64);
assert_relative_eq!(result.y(), 1141263.0111604529f64);

You can also transform entire geometries from geo-types by using the Transform trait.

use proj::{Proj, Transform};
use geo_types::{Coordinate, line_string};

let line = line_string![
    (x: -116.590457069172_f64, y: 32.55730630167689),
    (x: -116.590411068973, y: 32.55714830169309),
];
let proj = Proj::new_known_crs("EPSG:4326", "EPSG:6366", None).unwrap();

// create a new line with a different projection
let new_line = line.transformed(&proj).unwrap();

assert_eq!(new_line[0], Coordinate { x: 538447.8454476658, y: 3602285.563945497, });
assert_eq!(new_line[1], Coordinate { x: 538452.2313532799, y: 3602268.065714932, });

// or transform the original in-place
let mut line = line;
line.transform(&proj).unwrap();

assert_eq!(line[0], Coordinate { x: 538447.8454476658, y: 3602285.563945497, });
assert_eq!(line[1], Coordinate { x: 538452.2313532799, y: 3602268.065714932, });

License: MIT/Apache-2.0