Skip to content

gene-git/Arch-SKM

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 

Repository files navigation

kernel-sign

Overview

Signed kernel modules provide a mechanism for the kernel to verify the integrity of a module. This provides the tools needed to build a kernel with support for signed modules.

Latest Changes

  • key and hash types are now read from the kernel config file. Keeps everything consistent.
  • Code re-org with supporing modules now moved to lib/xxx.py
  • Code works with hash type sha3-xxx (e.g. sha3-512) available in kernel 6.7 and openssl 3.2 or later.

Available

Kernel-Sign Github repo:

These docs on signed kernel modules:

Introduction

Kernel Modules

The Linux kernel distinguishes and keeps separate the verification of modules from requiring or forcing modules to verify before allowing them to be loaded. Kernel modules fall into 2 classes:

Standard "in tree" modules which come with the kernel source code. They are compiled during the normal kernel build.

Out of tree modules which are not part of the kernel source distribution. They are built outside of the kernel tree, requiring the kernel headers package for each kernel they are to be built for. They can be built manually for a specific kernel and packaged, or they can be built whenever needed using DKMS DKMS

Examples of such packages, provided by Arch, include:

During a standard kernel compilation, the kernel build tools create a private/public key pair and sign every in tree module (using the private key). The public key is saved in the kernel itself. When a module is subsequently loaded, the public key can then be used to verify that the module is unchanged.

The kernel can be enabled to always verify modules and report any failures to standard logs. The choice to permit the loading and use of a module which could not be verified can be either compiled into kernel or turned on at run time using a kernel parameter as explained in Arch Wiki Kernel Parameters Arch Wiki Kernel Parameters.

How to sign kernel modules using a custom kernel

The starting point is based on building a custom kernel package outlined in Kernel/Arch Build System Kernel/Arch Build System,

We will adjust the build to:

  • Sign the standard in tree kernel modules
  • Provide what is needed to have signed out of tree modules and for the kernel to verify those modules.

Note: The goal is to have:

  • In tree modules signed during the standard kernel build process.

    The standard kernel build creates a fresh public/private key pair on each build.

  • Out of tree modules are signed and the associated public key is compiled in to the kernel. We will create a separate public/private key pair on each build.

Summary of what needs to be done

Each kernel build needs to made aware of the key/cert being used. Fresh keys are generated with each new kernel build.

A kernel config parameter is now used to make kernel aware of additional signing key:

CONFIG_SYSTEM_TRUSTED_KEYS="/path/to/oot-signing_keys.pem".

Keys and signing tools will be stored in current module build directory. Nothing needs to be done to clean this as removal is handled by the standard module cleanup.

Certs are thus installed in

/usr/lib/modules/<kernel-vers>-<build>/certs-local.

Kernel configuration

Kernel Config File

CONFIG_SYSTEM_TRUSTED_KEYS will be added automatically as explained below. In addition the following config options should be set by either manually editing the 'config' file, or via make menuconfig in the linux 'src' area and subsequently copying the updated .config file back to the build file config. It is preferable to use elliptic curve type keys and zstd compression.

  • CONFIG_MODULE_SIG=y

    Enable Loadable module suppot --->

    Module Signature Verification -> activate

  • CONFIG_MODULE_SIG_FORCE=n

    Require modules to be validly signed -> leave off

    This allows the decision to enforce verified modules only as boot command line. If you are comfortable all is working then by all means change this to 'y' Command line version of this is : module.sig_enforce=1

  • CONFIG_MODULE_SIG_HASH=sha512

    Automatically sign all modules -> activate Which hash algorithm -> SHA-512

    kernel 6.7 and later support sha3 hashes. The preferred hash choice is then sha3-512. This also requires openssl version 3.2 or newer.

  • CONFIG_MODULE_COMPRESS_ZSTD=y

    Compress modules on installation -> activate Compression algorithm (ZSTD)

  • CONFIG_MODULE_SIG_KEY_TYPE_ECDSA=y

    Cryptographic API ---> Certificates for Signature Checking ---> Type of module signing key to be generated -> ECDSA

  • CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n

    Enable Loadable module support ---> Allow loading of modules with missing namespace imports -> set off

Kernel command line

After you are comfortable things are working well you can enable the kernel parameter to require that the kernel only permit verified modules to be loaded:

module.sig_enforce=1

Tools needed

kernel build package

In the directory where the kernel package is built:

mkdir certs-local

This directory will provide the tools to create the keys, as well as signing kernel modules.

  • Copy these files into certs-local directory:
genkeys.py
install-certs.py
sign_module.py
lib/*.py
x509.oot.genkey

genkey.py & x509.oot.genkey

genkey.py along with its configuration file x509.oot.genkey are used to create key pairs. It also provides the kernel with the key to sign out of tree modules by updating the config file used to build the kernel.

genkeys.py will create the key pairs in a directory named by date-time. It defaults to refreshing the keys every 7 days but this can be changed with the --refresh command line option.

It also creates a soft link named 'current' which points to the newly created directory with the 'current' keys. The actual key directory is named by date and time.

genkeys will check and update kernel configs given by the --config config(s) option. This takes either a single config file, or a shell glob for mulitple files. e.g. --config 'conf/config.*'. Remember to quote any wildcard characters to prevent the shell from expanding them.

All configs will be updated with the same key. The default keytype and hash are taken from the kernel config (from CONFIG_MODULE_SIG_HASH and CONFIG_MODULE_SIG_KEY_TYPE_xxx) [1].

If multiple kernel configs are being used, all must use same key and hash types.

[1]In earlier versions these defaulted to elliptic curve and sha512 and could be set from the command line.

sign_module.py

signs out of tree kernel modules. It can be run manually but is typically invoked by dkms/kernel-sign.sh. It handles modules compressed with zstd, xz and gzip and depends on python-zstandard package to help with those compressed with zstd.

install-certs.py

is called from the package_headers() function of PKGBUILD to install the signing keys. Example is given below.

These files are all provided.

dkms support

Important

DKMS a mechanism for out-of-tree modules to be compiled against the kernel headers. It is one thing to use signed modules provided in the kernel source but it is quite another to use modules, signed or not, that are out-of-tree. Any such module will taint the kernel. See kernel docs tainted_kernel for more information.

mkdir certs-local/dkms

and add 2 files to the dkms dir:

kernel-sign.conf
kernel-sign.sh

These will be installed in /etc/dkms and provide a mechanism for dkms to automatically sign modules using the local key discussed above - this is the reccommended way to sign kernel modules. As explained, below - once this is installed - all that is needed to have dkms automatically sign modules is to make a soft link:

cd /etc/dkms
ln -s kernel-sign.conf <module-name>.conf

For example: .. code-block:: bash

ln -s kernel-sign.conf vboxdrv.conf

The link creation can easily be added to an arch package to simplify further if desired.

Modify PKGBUILD

What to change

We need to make changes to kernel build as follows:

prepare()

Add the following to the top of the prepare() function:

prepare() {
 ...
    echo "Rebuilding local signing key..."
    # adjust cerdir as needed
    certdir='../certs-local'
    $certdir/genkeys.py -v --config ../config --refresh 30d
  ...
}

The default key regeneration refresh period is 7 days, but this can be changed on the command line. If you want to create new keys monthly, then use "--refresh 30days" as an option to genekeys.py. You can refresh on every build by using "--refresh always". Refresh units can be seconds,minutes,hours,days or weeks.

_package-headers()

Add the following to the bottom of the _package-headers() function:
_package-headers() {

...

#
# Out of Tree Module signing
# This is run in the kernel source / build directory
#
echo "Local Signing certs for out of tree modules..."

certs_local_src="../../certs-local"
certs_local_dst="${builddir}/certs-local"

${certs_local_src}/install-certs.py $certs_local_dst

# install dkms tools if needed
dkms_src="$certs_local_src/dkms"
dkms_dst="${pkgdir}/etc/dkms"
mkdir -p $dkms_dst

rsync -a $dkms_src/{kernel-sign.conf,kernel-sign.sh} $dkms_dst/
}

Required Files

This is the list of files referenced above. Remember to make scripts executable.

  • certs-local/genkeys.py
  • certs-local/install-certs.py
  • certs-local/x509.oot.genkey
  • certs-local/sign_module.py
  • certs-local/lib/arg_parse.py
  • certs-local/lib/refresh_needed.py
  • certs-local/lib/class_genkeys.py
  • certs-local/lib/get_key_hash.py
  • certs-local/lib/make_keys.py
  • certs-local/lib/signer_class.py
  • certs-local/lib/update_config.py
  • certs-local/lib/utils.py
  • certs-local/dkms/kernel-sign.conf
  • certs-local/dkms/kernel-sign.sh

Arch AUR packags

AUR Packages

There is an Arch Sign Modules package in the AUR along with its companion github repo Arch-SKM which make use of Kernel_Sign

arch-sign-modules reduces the manual steps for building a fully signed custom kernel to 3 commands to Update, Build and Install a kernel.

abk -u kernel-name
abk -b kernel-name
abk -i kernel-name

For more information see Arch-SKM-README and example Arch-SKM-PKGBUIILD

License

Created by Gene C. and licensed under the terms of the MIT license.

  • SPDX-License-Identifier: MIT
  • Copyright (c) 2020-2023, Gene C

About

Tools to support signed kernel modules to linux kernel build

Topics

Resources

Stars

Watchers

Forks

Packages

No packages published