Copyright Notice

ESnet SmartNIC Copyright (c) 2022, The Regents of the University of California, through Lawrence Berkeley National Laboratory (subject to receipt of any required approvals from the U.S. Dept. of Energy), 12574861 Canada Inc., Malleable Networks Inc., and Apical Networks, Inc. All rights reserved.

If you have questions about your rights to use or distribute this software, please contact Berkeley Lab's Intellectual Property Office at [email protected].

NOTICE. This Software was developed under funding from the U.S. Department of Energy and the U.S. Government consequently retains certain rights. As such, the U.S. Government has been granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable, worldwide license in the Software to reproduce, distribute copies to the public, prepare derivative works, and perform publicly and display publicly, and to permit others to do so.

Support

The ESnet SmartNIC platform is made available in the hope that it will be useful to the networking community. Users should note that it is made available on an "as-is" basis, and should not expect any technical support or other assistance with building or using this software. For more information, please refer to the LICENSE.md file in each of the source code repositories.

The developers of the ESnet SmartNIC platform can be reached by email at [email protected].

Download the Xilinx Labtools Installer

• Open a web browser to this page: https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/vivado-design-tools/2023-2.html
• Under the Vivado Lab Solutions - 2023.2 section
  • Download Vivado 2023.2: Lab Edition - Linux
  • Save the file as exactly: Vivado_Lab_Lin_2023.2_1013_2256.tar.gz
• Move the file into the vivado-installer directory in this repo

Download the Alveo Smartnic Satellite Controller Update Tool

• Open a web browser to this page: https://support.xilinx.com/s/article/73654
• At the bottom of the page under the Files section
  • Download loadsc_v2.3.zip
  • Save the file as exactly loadsc_v2.3.zip
• Move the file into the sc-fw-downloads directory in this repo

Verify that you have the downloaded files all in the right places

This is a map of where the downloaded files should be placed

$ tree
.
├── Dockerfile
├── entrypoint.sh
├── LICENSE.md
├── patches
│   └── vivado-2023.2-postinstall.patch
├── README.md
├── sc-fw-downloads
│   └── loadsc_v2.3.zip   <------------------------------------- put the zip file here
├── sc-fw-extra
├── sources.list.focal
└── vivado-installer
    ├── install_config_lab.2023.2.txt
    └── Vivado_Lab_Lin_2023.2_1013_2256.tar.gz          <------- put the installer here

Building the xilinx-labtools container

docker build --pull -t xilinx-labtools-docker:${USER}-dev .
docker image ls

You should see an image called xilinx-labtools-docker with tag ${USER}-dev.