• PWM Wave Player Super Lite for PIC16F1xxx with Jalv2
  • Specification:
  • Youtube demo movie:
  • Schematic:
  • Output filter:
  • SD Card connection:
  • Pickit2/3 pin map
  • Download:
  • Write hex file to flash:
  • Converting to fs=44.1kHz,PCM 8bit stereo or mono data:
  • Supported SD card:
  • References:

PWM Wave Player Super Lite for PIC16F1xxx with Jalv2

I came across this page WAVE PLAYER FOR PIC16F877A.! and
had an impression for very small code size about 1700 words.
But I struggled with the program that aimed to old and particular MMC FAT16 format
in the now, so I'd rewritten it using Jalv2(Jal) language
in order to work with SDSC(FAT16) / SDHC(FAT32) SD card from 2GB to 32GB.

Specification:

1. Supported PICs are 8bit Enhanced Midrange PIC16F1xxx series
   and PIC18F26J50 etc, as follows:

   • Programmed by PicKit2/3:

     PIC12F1840
     PIC16F1455	PIC16F1459
     PIC16F1705	PIC16F1709
     PIC16F1825	PIC16F1827	PIC16F1829
     PIC16F1938
     PIC18F14K50
     PIC18F26J50

   • Programmed by PicKit3 or later:

     PIC16F1619
     PIC16F1764
     PIC16F18313
     PIC16F18325

2. PCM wave music file
   Select 8bit stereo or mono.
   fs (Sample frequency) = 44.1KHz.

3. Auto play after power on.

4. One push switch controls Play,Pause and Next song operation.

5. Code size is about 1700 words.

Youtube demo movie:

Schematic:

• Refer to pin_map.txt in the archive file.

Output filter:

• Schematic
  

SD Card connection:

• Pin side

   --------------.
           9     = \    DAT2/NC
               1 ===|   CS/DAT3    [CS]
               2 ===|   CMD/DI     [DI]
               3 ===|   VSS1
   Bottom      4 ===|   VDD
   View        5 ===|   CLK        [CLK]
               6 ===|   VSS2
               7 ===|   DO/DAT0    [DO]
           8       =|   DAT1/IRQ
   -----------------'
  

• Logo side

                                           Arduino  NUCLEO-F411  NUCLEO-F030R8
   -----------------.
           8       =|   DAT1/IRQ
               7 ===|   DO/DAT0    [DO]     D12       D12/PA_6      D12/PA_6
               6 ===|   VSS2
   Top         5 ===|   CLK        [CLK]    D13       D13/PA_5      D13/PA_5
   View        4 ===|   VDD
               3 ===|   VSS1
               2 ===|   CMD/DI     [DI]     D11       D11/PA_7      D11/PA_7
               1 ===|   CS/DAT3    [CS]     D8        D10/PB_6      D10/PB_6
           9     = /    DAT2/NC
   --------------'
  

Pickit2/3 pin map

 ------------------
 Pickit2/3 pin map
 ------------------
 ----------.
            \
             \
          ==> |1 Vpp/MCLR
              |2 VDD Target
              |3 Vss ground
              |4 ICSPDAT/PGD
              |5 ICSPCLK/PGC
              |6 Aux N.C.
              /
             /
 -----------'

Download:

• Latest version
  16f-wave-player-pwm-super-lite-jalv2-9.1.zip (2021/12)
  If you need to recompile the source code, use this Jalv2 version : jallib_full-1.6.0.7z

• Old version
  16f-pwm-wave-player_jalv2_v8.8-2019-02.zip
  16f-pwm-wave-player_v8.6-2017-02.zip
  If you need to recompile the source code, use this Jalv2 version : jallib_full-1.2.0.zip

Write hex file to flash:

• You can find hex files in hex folder,
  for instance,
  sd-wav-player-16F1705-v8.8-2019-02.hex
  You can write this file to flash using PicKit2/3 Programmer.

Converting to fs=44.1kHz,PCM 8bit stereo or mono data:

• For 8pin PICs: The .wav files must be converted to 'Mono' data.
  For other PICs:The .waf files must be converted to 'Stereo' data.
• Use converter tools for example,
  foobar2000
  Audacity
  SoX
  etc.

Supported SD card:

• SDSC/SDHC card, FAT16 and FAT32.
  1. First, format SD card with SD Card Formatter
  2. Copy PCM wav files to the SD card in root directory.

References:

• Jalv2 mailing list
• Wave Player Super Lite family
  • Nim: AVR Arduino Uno/Nano version is here.
  • Nim: ARM STM32 version is here.
  • C/C++: mbed version is here.