Skip to content

Pose2Sim visualizer tool — Import cameras and OpenSim data in Blender

License

Notifications You must be signed in to change notification settings

davidpagnon/Pose2Sim_Blender

 
 

Repository files navigation

Open Source? Yes! License DOI

Pose2Sim Blender

Pose2Sim_Blender is a Blender add-on for visualizing Pose2Sim results -- and more.

N.B.:

  • Faster .mot import
  • Fixed various issues

Pose2Sim is an open-source pipeline for obtaining research-grade 3D motion analysis from consumer-grade cameras (such as phones, webcams, GoPros, etc).

This add-on can be used to visualize:

  • Camera calibration (from a .toml file)
  • Markers (from a .trc or .c3d file)
  • OpenSim data (such as .osim models, .mot motions, and .mot forces)
  • And much more...

Demo for other Pose2Sim tools

N.B.:
OpenSim is an open-source software for research in biomechanics, widely used in motion capture (MoCap).
Blender is an open-source software used for 3D modeling, animation, and rendering.


Contents

  1. Installation
    1. Quick install
    2. Full install
  2. Demonstration
    1. Camera tools
    2. OpenSim imports
    3. Other tools
  3. How to cite and how to contribute
Pose2Sim.Blender.mp4

Installation

Quick install

N.B.: Full install is required for importing .mot motion files.


  • Open Blender -> Edit -> Preferences -> Add-ons -> Install -> Choose Pose2Sim_Blender.zip
  • Check Pose2Sim Blender to enable it
  • Press n or Click on the tiny arrow on the upper-right corner of the 3D viewport to open the tool

Where to find Pose2Sim add-on


Full install

Only needed for importing .mot motion files.

Full installation requires admin rights on your computer. It is a little tricky, but the following steps should do it smoothly. If you encounter any issues, please submit an issue. Only Windows has been tested, but feel free to tell me how it goes on other platforms!

1. Prerequisites
2. Find your Blender Python version

  Open Blender, press Shift+F4, type the following lines:

import sys
sys.version
3. Install Pose2Sim_Blender libraries
  • Open Miniconda, and copy-paste these lines.
    Replace with the Python version you just found:
conda create -n Pose2Sim_Blender python=3.10.13 -y 
conda activate Pose2Sim_Blender
conda install -c opensim-org opensim -y
pip uninstall numpy
pip install numpy bpy toml vtk
  • Now write down the location of your newly created environment (typically C:\Users\<USERNAME>\miniconda3\envs\Pose2Sim_Blender):
conda env list
  • OpenSim installation needs to be fixed. Open <LOCATION_OF_POSE2SIM_BLENDER_ENV>\Lib\opensim_init_.py with any text editor:
    • comment out the line # from .moco import *
    • line 4, insert the path to your OpenSim bin folder: os.add_dll_directory(r"C:/OpenSim 4.5/bin").
      Replace 4.5 with the version you installed
4. Link your conda environment to Blender Python

  Open CMD as an administrator.
  Replace with your Blender version and with the location of your Pose2Sim_Blender environment:

cd "C:\Program Files\Blender Foundation\Blender 4.0\4.0"
mv python python_old
mklink /j python <LOCATION_OF_POSE2SIM_BLENDER_ENV>
mv /j python\DLLs python\DLLs_old
mklink /j python\DLLs python_old\DLLs
mklink /j python\bin python_old\bin

  Now, any package you install in your conda environment will immediately be available in Blender.

5. Install Pose2Sim_Blender add-on in Blender
  • Blender -> Edit -> Preferences -> Add-ons -> Install -> Choose Pose2Sim_Blender.zip
  • Check Pose2Sim_Blender to enable it
  • Press n or Click on the tiny arrow on the upper-right corner of the 3D viewport to open the tool

Demonstration

Find example files in the Examples folder of your Pose2Sim_Blender.zip archive.

Camera tools

  • Import:
    Import a .toml calibration file from Pose2Sim.
  • Export:
    Export updated cameras as a .toml calibration file.
  • Show:
    Import videos, image sequences, or still images in your camera frame of reference. The image plane is automatically scaled when translated.
  • Film:
    Render view from all or selected cameras, as a movie or an image sequence. Choose your framerate, the first and last frame to be rendered, and the output quality.

OpenSim imports

  • Import Markers:
    Import a .trc or a .c3d marker file, e.g., generated by Pose2Sim triangulation.
    N.B.: Make sure you entered the right Target framerate (upper right corner).
  • Import Model:
    Import the "bodies" of an .osim model.
    If you did the full install and some Geometry files exist only as .vtp, they will automatically be converted to .stl.
  • Import Motion:
    Import a .mot or a .csv motion file. N.B.: Make sure you entered the right Target framerate (upper right corner).
    • If you did the full install, you can import a .mot file. Calculating all body segment positions may take a while if the model is complex or if there are many time frames. Creates a .csv file for faster loading next time.
    • If not, you will have to install the OpenSim API outside of Blender and use bodykin_from_mot_osim.py to convert it to .csv.
  • Import Forces:
    Import a .mot GRF force file.
    N.B.: Make sure you entered the right Target framerate (upper right corner).

Other tools

  • See through cameras:
    View from selected camera, with markers and OpenSim model overlay.
  • Rays from 3D point:
    Trace rays from one or several selected 3D points. This can help you verify if a triangulated point correctly meets 2D keypoints on image planes.
  • Ray from image point:
    Coming soon! Trace ray from a point selected on an image plane. This can help you see if rays intersect correctly.
  • Export to Alembic:
    Export to an .abc Alembic "baked" file, for fast import into other softwares.

How to cite and how to contribute

How to cite

If you use Pose2Sim_Blender, please cite Pagnon et al., 2022b.

 @Article{Pagnon_2022_JOSS, 
  AUTHOR = {Pagnon, David and Domalain, Mathieu and Reveret, Lionel}, 
  TITLE = {Pose2Sim: An open-source Python package for multiview markerless kinematics}, 
  JOURNAL = {Journal of Open Source Software}, 
  YEAR = {2022},
  DOI = {10.21105/joss.04362}, 
  URL = {https://joss.theoj.org/papers/10.21105/joss.04362}
 }

How to contribute

I would happily welcome any proposal for new features, code improvement, and more!
If you want to contribute to Sports2D, please follow this guide on how to fork, modify and push code, and submit a pull request. I would appreciate it if you provided as much useful information as possible about how you modified the code, and a rationale for why you're making this pull request. Please also specify on which operating system, as well as which Python, Blender, OpenSim versions you have tested the code.

Here is a to-do list. Feel free to complete it:

  • Import data from standard OpenSim data files (.osim, .mot, .trc, grf.mot)
  • Import c3d files (borrowed and adapted from io_anim_c3d )
  • Save segment position and orientation to .csv files for faster loading of motion next time
  • Import multiple persons in the same scene
  • Create Example data
  • Convert .vtp files to .stl if .stl not found on disk
  • Rig from OpenSim model and/or imported markers
  • Import .sto motion and force files
  • Import .c3d and .trc files with the same appearance
  • Install OpenSim (for motion .mot files) with a click within the addon (create a venv with the right Python version cf CEB, install OpenSim and the other dependencies)

  • Import cameras from .toml calibration file
  • Export cameras to .toml calibration file
  • Import images, image sequences, and videos in the camera view
  • Viewport render to film with selected cameras

  • See through camera and overlay model and markers
  • Reproject rays from selected 3D points to image view
  • Trace rays from camera to selected image point
  • Export to .abc Alembic files

  • Write documentation
  • Create video tutorial