Skip to content

i2c-devices is a library for using I2C devices by using /dev/i2c-* or /sys/class/gpio with bit-banging.

Notifications You must be signed in to change notification settings

cho45/ruby-i2c-devices

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

74 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ruby-i2c-devices

i2c-devices is a library for using I2C devices.

SYNOPSYS

Usage of I2CDevice class directly:

require "i2c"
require "i2c/driver/i2c-dev"
device = I2CDevice.new(address: 0x60, driver: I2CDevice::Driver::I2CDev.new("/dev/i2c-1"))

# like i2c-tools's i2cget command
length = 3
device.i2cget(0x01, length)

# like i2c-tools's i2cset command
device.i2cset(0x01, 0x11, 0x12 ... )

or pre-defiend device driver class:

require "i2c/device/acm1602ni"

lcd = I2CDevice::ACM1602NI.new

lcd.put_line(0, "0123456789ABCDEF")

with driver class

require "i2c/device/mpl115a2"
require "i2c/driver/i2c-dev"

mpl = I2CDevice::MPL115A2.new(driver: I2CDevice::Driver::I2CDev.new("/dev/i2c-0"))
p mpl.calculate_hPa

or GPIO backend driver (this is very slow)

require "i2c/device/mpl115a2"
require "i2c/driver/gpio"

mpl = I2CDevice::MPL115A2.new(driver: I2CDevice::Driver::GPIO.new(
	sda: 23, # pin 16 in raspberry pi
	scl: 24, # pin 18 in raspberry pi
))

p mpl.calculate_hPa

Class

I2CDevice

Generic class for manipulating I2C device.

I2CDevice.new(address: address, driver: driver)

  • address : Integer : 7-bit slave address without r/w bit. MSB is always 0.
  • driver : I2CDevice::Driver : backend driver class. (default: I2CDevice::Driver::I2CDev)

I2CDevice#i2cset(*data) #=> Integer

Write data to slave.

Returns Integer which is bytes length wrote.

I2CDevice#i2cget(param, length=1) #=> String

This method read data from slave with following process:

  1. Write param to slave
  2. re-start
  3. Read data until NACK or length

Returns String.

I2CDevice::Driver::I2CDev

This depends on /dev/i2c-* (i2c-dev) feature on Linux. You may load i2c-dev kernel module.

I2CDevice::Driver::I2CDev.new(path)

  • path : String : Path to /dev/i2c-*

I2CDevice::Driver::GPIO

This depends on /sys/class/gpio feature on Linux and implements by bit-banging.

I2CDevice::Driver::I2CDev.new(sda: sda, scl: scl, speed: speed)

  • sda : Integer : Pin number of SDA.
  • scl : Integer : Pin number of SCL.
  • speed : Integer : I2C clock speed in kHz. (default: 1)

Pin number of sda and scl is not real pin number but logical pin number. Eg. In Raspberry Pi, specifing sda: 23, scl: 24 means using 16 and 18 pin.

You can specify 100 kHz or 400 kHz (or more) to speed but speed is rate-limited by host CPU speed. Typically, this module fall short of requirements of I2C spec (in Raspberry Pi, clock speed is about 1.3kHz). But most slave devices support DC~100kHz clock speed.

REQUIREMENTS

Currently this library depends on Linux's i2c-dev or sysfs with GPIO feature.

  • I2CDevice::Driver::I2CDev /dev/i2c-0 (i2c-dev), default
  • I2CDevice::Driver::GPIO /sys/class/gpio (GPIO)

TODO

  • More supported devices

About

i2c-devices is a library for using I2C devices by using /dev/i2c-* or /sys/class/gpio with bit-banging.

Topics

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages