Skip to content

blue-heron/blue_heron

Repository files navigation

BlueHeron

Hex version API docs mix test

BlueHeron is a new Elixir Bluetooth LE Library that communicates directly with Bluetooth modules via HCI. It is VERY much under construction, and we expect the user API to change completely.

On the plus side, BlueHeron has no dependencies on Linux's bluez stack so if you either can't use bluez, don't want to, or have a simple BLE use case, please join us in building this out! We gather on the Elixir Lang slack in the #nerves-bluetooth channel.

Goals

BlueHeron development was started since SmartRent had a need for a very simple BLE interface on one of its Nerves devices. The existing Elixir BLE library, Harald, didn't have enough functionality and we made so many modifications that it no longer felt like the library followed the spirit of what Harald wanted to be.

Our goals here are to make a one-stop BLE library with support for the following:

  • Scan for and connect to BLE peripheral devices (BlueHeron takes on the central role like a smartphone)
  • GATT client support
  • Work with USB and UART-based Bluetooth modules
  • Support BLE beacons
  • BLE peripheral and GATT server support

The current focus is on filling out the central role. The API is quite unstable at the moment, but we're aiming for a high level API so that most users don't need to become Bluetooth experts. Currently, the raw API is helping us learn and iron out quirks quickly. See Rationale for more about why we're doing building this library.

If you are interested in adding support for the other roles, please let us know either here or on Slack. While we're very interested in part of this library for work, we're also having fun with BLE and figure that we might as well see if we can hit some Nerves use cases too.

Hardware compatibility

We have only tested BlueHeron with a limited number of Bluetooth adapters. Here's what's known:

Bluetooth module or chipset Connection Works? Firmware Notes
Realtek WiFi/BT combo (EDUP EP-AC1681) USB Yes rtl_bt/rtl8822b_fw.bin BlueHeron doesn't need to load the firmware for this one to work.
Cypress CYW43438 (RPi0W and RPi 3B) UART Yes ? BlueHeron doesn't need to load the firmware for this one to work.
Cypress CYW43455 (RPi 3A+ and 3B+) UART No ? Retry when #21 is fixed

Getting started

See the examples for the time being.

Transports

BlueHeron interacts with Bluetooth modules via transports. Transport implementations are not part of this library since they are hardware-specific. See BlueHeronTransportUART and BlueHeronTransportUSB for examples.

HCI Logging

This project includes a Logger backend to dump PKTLOG format. This is the same format that Android, IOS, btstack, hcidump, and bluez use.

Add the backend to debug all data to/from the HCI transport:

iex> Logger.add_backend(BlueHeron.HCIDump.Logger)
BlueHeron.HCIDump.Logger

This will produce a file /tmp/hcidump.pklg that can be loaded into Wireshark.

NOTE This project configures logger so it is always enabled by default. However, this can be disabled by setting config :blue_heron, log_hci_dump_file: false

The BlueHeron.HCIDump.Logger module implements a superset of Elixir's builtin logger and all non-HCI data is forwarded directly to Elixir's Logger.

iex> require BlueHeron.HCIDump.Logger, as: Logger
BlueHeron.HCIDump.Logger
iex> Logger.debug("sample data")

16:43:46.496 [debug] sample data

iex>

Helpful docs

Rationale

This library will likely feel like a whole lot of reinvention of the wheel for anyone familiar with Bluetooth stacks in embedded Linux. It took around three years for one of us to get to this point of starting a new library, so it's worth sketching out why.

The obvious approach is to use Linux's bluez stack. It certainly worked, but was complicated for most people to set up when using Nerves. Consequently, it was hard to debug and a thankless task for anyone attempting to support Nerves users. It was far easier to use bluez on a batteries-included OS distribution like Raspbian.

The next approach was to use a smart Bluetooth module like an Adafruit Bluefruit module or a Roving Networks (now Microchip) Bluetooth module. These have an AT style command set for doing common Bluetooth things (for example, see here), and are fairly easy to use once you got used to the interface. Not everyone wanted to use these for various reasons (cost being a big one).

A good alternative was to use a C Bluetooth stack that talks directly to a Bluetooth module via UART or USB using the HCI protocol. These are typically marketed towards microcontroller users, but can be made to work on minimal Linux configurations too. Some of the options have good documentation and are commercially supported.

Integrating the C stack still required work, and since our needs were so simple, we simultaneously looked at an Elixir implementation. Elixir has a way of making dull work surprisingly enjoyable, and it's especially suited to communication protocols. When the proof-of-concept started working in not much time, we decided that we'd much rather spend our time in Elixir than anywhere else.

Will this library have more features than bluez? Not even close. Will it do what we need? Yes. Will it have fewer bugs, be more robust, etc.? Don't know, but its small size and few parts is easier to get our heads around and debug when issues come up. Is it fun to work on? Yes, so we got permission to open-source it, so we could use it for hobby projects too.

Support

We provide best-effort support via the Elixir Forum and the #nerves-bluetooth channel on the Elixir Slack. If you need more immediate support or feature additions, commercial support is provided by Binary Noggin.

License

The source code is released under Apache License 2.0.

Check NOTICE and LICENSE files for more information.