Skip to content
/ piv Public

PIV is a REXX procedure that you can run in batch to verify that a z/OS system is in the state you expect it to be after making a change.

License

Notifications You must be signed in to change notification settings

abend0c1/piv

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

7 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

PIV icon

PIV - Post Implementation Verifier

TABLE OF CONTENTS

OVERVIEW

PIV is a REXX procedure that you can run in batch to verify that the system is in the state you expect it to be after making a change.

How is this better than simply running SDSF in batch?

  1. There is less clutter because there is no SDSF screen rendering
  2. You can programmatically examine the SDSF command response lines (or file content) and set an appropriate condition code.

Because of this it can be used as an audit tool to verify, for example, that PARMLIB members contain the correct values, or system software is at the expected maintenance level etc. This is much quicker than doing a manual audit check on possibly many systems.

PIV can be used to:

  • issue z/OS commands and Unix command and verify that the response is as expected
  • read z/OS datasets or Unix files and verify that they contain the expected strings
  • read JES sysout datasets (including those in the job executing the PIV REXX) and verify that the content is as expected.

The result of this checking is indicated in the job step condition code of the step running the PIV EXEC. Usually COND CODE 0 means "all good" and COND CODE 4 means "PIV failed" - but you can set whatever condition code you want. This enables you to take further automated action depending on the condition code.

PIV also prints a log of its own activity, including all commands issued and responses received, which makes for an excellent audit artifact.

PREREQUISITES

  1. To fully benefit from PIV you will need appropriate RACF authorisations to:
  • Issue SDSF console commands
  • Read SDSF spool files
  • Read Unix System Services files
  • Issue Unix System Services commands

However, you will still be able to use a subset of its features (for example, examining your own SDSF job output) if your site allows that.

INSTALLATION

  1. Install the following REXX file into your RECFM=VB LRECL=255 REXX library (FB80 is sooooo last century):

    File Description
    PIV The PIV processor

HOW PIV WORKS

The PIV REXX procedure uses the SDSF REXX interface to:

  • Extract information from SDSF
  • Read specified spool files
  • Issue z/OS commands

It can also:

  • Issue Unix commands and retrieve the resulting output
  • Read z/OS datasets and Unix files

As each command is executed, the response (e.g. console command output, or file contents) is stored in REXX line.n variables for subsequent testing (for example, by ASSERT commands).

The PIV SDSF commands are pretty much identical to the SDSF primary commands that everyone is familiar with, so the learning curve is minimal.

However, there are some additional PIV commands that can be used to verify the system state (ASSERT, IF and USING, PASSIF, FAILIF) and set the job step condition code accordingly.

The PIV REXX procedure prints a simple report (to SYSTSPRT) of its activities which include:

  • The command issued (e.g /D ETR, or READ SYS1.PARMLIB(IEASYS00), etc)
  • The command response received (or the file contents read)
  • The result of any verification commands (e.g. ASSERT)

At the end of the report, a simple one-line statement is written to indicate success or failure of the PIV process:

  • Result: PIV successful
  • Result: PIV failed with maxrc=n

COMMAND SYNTAX

All commands and tests are read from DD INPUT.

The syntax rules for the input file are:

  1. CONTINUATIONS

    A line continuation is indicated by a comma (,) as the last non-blank character (i.e. the same as a REXX continuation).

  2. COMMENTS

    Lines with a blank in column 1 are treated as comments and are simply printed to SYSTSPRT as-is.

  3. COMMANDS

    A line NOT beginning with a blank in column 1 is a command to be processed. All commands are case-insensitive. The response from each command is returned in REXX variables called line.n where n ranges from 1 to the number of response lines and line.0 contains the number of response lines.

EXAMPLE

This example checks the health of a fictitious software product:

//PIVTEST  JOB ,,CLASS=A,MSGCLASS=X,NOTIFY=&SYSUID
//PIV     EXEC PGM=IKJEFT1A,PARM='%PIV'
//SYSEXEC   DD DISP=SHR,DSN=your.exec.lib
//SYSTSPRT  DD SYSOUT=*
//INPUT     DD *
  Ensure the product started tasks are all running. We expect
  that both MYSTCA and MYSTCB are up:

prefix MY*
da
assert find('MYSTCA')
assert find('MYSTCB')

  Check that the software version is correct and is licensed:

select mystca sysprint
assert  find('MY0001I','VERSION', '1.0.39')
assert \find('MY0002E','LICENSE EXPIRED')
assert \find('MY0003W','LICENSE ABOUT TO EXPIRE')

  Check that the software configuration settings are correct:

read SYS1.PARMLIB(MYCONFIG)
assert isPresent('STC=MYSTCA')

  Check that the software is responding to commands:

/F MYSTCA,DISPLAY,VERSION
assert isPresent('MY0001I')

  Just for shiggles, check that the Server Time Protocol is active:

/D ETR
using keyword . . mode .
passif keyword = 'SYNCHRONIZATION' & mode = 'STP'
using . . . . keyword level .
passif keyword = 'STRATUM' & level < 3
/*

List of PIV Commands

All commands must start in column 1 and are case insensitive. The uppercase letters are the minimum abbreviation for each of the commands shown below.

Command Description
HELP Display this help information (in batch)
/zoscommand Issue a z/OS command (e.g. /D ETR)
Reply msgno replytext Reply to a particular WTOR (identified by message number) after a z/OS command is issued
PREfix [jobname] Filter SPOOL files by job name. Reset the filter by omitting the job name
OWNer [userid] Filter SPOOL files by owner name. Reset the filter by omitting the owner name
SYSname [sysname] Filter SPOOL files by system name. Reset the filter by omitting the system name
DEST [destname] Filter SPOOL files by destination name. Reset the filter by omitting the destination name
SORT sortspec Set the column sorting order for tabular output from an SDSF primary command (DA, I, O, etc)
sdsfcommand Issue an SDSF primary command (e.g. DA, I, O, etc) - optionally filtered by prior PREFIX, OWNER, SYSNAME and DEST commands
? List the spool datasets for this job. You must first issue an SDSF primary command (DA, I, O, etc)
Select jobname [sysoutdd [stepname [procstep]] Read the specified JES SPOOL dataset(s) for a job into REXX line.n stem variables. The datasets to be read can optionally be filtered by sysoutdd etc). You must first issue an SDSF primary command (DA, I, O, etc)
USS usscommand Issue a USS command (e.g. cat /etc/profile) and capture the output into REXX line.n stem variables
READ {dsn | ddname | pathname} Read a dataset or PDS member, a DD name, or a Unix file into REXX line.n stem variables
SET var = value Set a REXX variable (usually, an SDSF special variable such as ISFPRTDSNAME) prior to issuing an SDSF export command (XD, XDC, XF, XFC)
XD jobname [sysoutdd [stepname [procstep]] Export and append the specified JES sysout dataset to a dynamically allocated output dataset (identified by the ISFPRTDSNAME REXX variable)
XDC jobname [sysoutdd [stepname [procstep]] Same as XD but Close the dynamically allocated output dataset afterwards
XF jobname [sysoutdd [stepname [procstep]] Export and append the specified JES sysout dataset to a pre-allocated output DD name (identified by the ISFPRTDDNAME REXX variable)
XFC jobname [sysoutdd [stepname [procstep]] Same as XF but Close the pre-allocated output DD name afterwards
SHow ? Display the gamut of column names for the most recently issued SDSF primary command (DA, I, O, etc)
SHow column [column ...] Display the values in just the specified columns (after issuing an SDSF primary command (DA, I, O, etc)
SHow ON Enable automatic display of command responses
SHow OFF Suppress display of command responses
SHow Display the response lines for the previous command (even if automatic display is suppressed)
SHow nnn Limit command response output to nnn lines
SHow heading[,m[,n]] Display a command response heading of heading, and limit command response output to lines m to n
SHow 'str [str ...]' Display only those command response lines at contain at least one of the specified strings
ASSERT expression Evaluate the REXX expression expression and set return code (rc) 0 if true, or 4 if false
IF expression THEN rc = n; ELSE ... Evaluate the REXX expression expression and set rc to a user-specified return code n
USING template Define a REXX parsing template for use by the PASSIF and FAILIF commands
PASSIF expression Set return code 0 if a response line is found where the expression evaluates to 1 (true), else sets return code 4
FAILIF expression Set return code 4 if a response line is found where the expression evaluates to 1 (true), else sets return code 0

HELP

Prints this help information in batch.

/zoscommand

Any command prefixed with a / character is submitted to z/OS for execution as an operator command. For example,

 /D ETR

You will need RACF authorisation for this to be successful.

Reply msgno replytext

If *nn msgno is found in the command response then reply automatically by issuing:

/R nn,replytext

You can specify many REPLY commands and the first matching msgno will be actioned.

PREfix [jobname]

Filter SPOOL files by job name. Reset the filter by omitting the job name.

OWNer [userid]

Filter SPOOL files by owner name. Reset the filter by omitting the owner name.

SYSname [sysname]

Filter SPOOL files by system name. Reset the filter by omitting the system name.

DEST [destname]

Filter SPOOL files by destination name. Reset the filter by omitting the destination name.

SORT sortspec

Set the column sorting order for tabular output from an SDSF primary command (DA, I, O, etc). You must enter column names rather than column titles (e.g. SORT DATEE D TIMEE D). Issue the SHOW ? command to list the gamut of column names after you have selected the SDSF primary command (DA, I, O etc).

sdsfcommand

Issue an SDSF primary command (DA, O, H, I, ST, PS, etc). The response is stored in line.n REXX variables. Only a subset of the columns is returned, but you can adjust this by updating the PIV REXX procedure to set the g.0COLS. variables as required.

?

List spool datasets for a job (when issued after DA, O, H, I or ST primary command).

Select jobname [sysoutdd [stepname [procstep]]]

This is a PIV command to read the sysout of the specified jobname into the line.n variables - after you have issued an SDSF primary command (DA, O, I etc).

You can refine the sysout to be selected by sysoutdd, step name, and proc step name.

USS usscommand

This is a PIV command to issue a Unix System Services shell command and retrieve the command output into line.n variables.

For example:

USS cat /etc/profile

READ {dsn | ddname | pathname}

This is a PIV command to read the contents of the specified dataset into the line.n variables.

If dsn contains a / then it is treated as a (case-sensitive) Unix path name. The content of the file will be converted to EBCDIC (IBM-1047) if necessary.

If dsn contains a . then it is treated as a (case-insensitive) fully qualified dataset name that will be dynamically allocated.

Otherwise it is assumed to be the name of a pre-allocated DD in your JCL.

For example,

Command Description
read sys1.parmlib(ieasys00) Reads the IEASYS00 member of SYS1.PARMLIB
read /etc/profile Reads the contents of the Unix /etc/profile file
read MYDD Reads the dataset allocated as DD: MYDD

SET var = value

This is a PIV command to set an SDSF/REXX interface special variable.

The complete list of valid variables is described in "SDSF Operation and Customization" (manual SA23-2274) in Table 180 "Special REXX Variables".

Some useful ones (when using XD, XDC, XF, or XFC) are:

Variable Meaning
ISFPRTDDNAME Export DD name (for XF/XFC)
ISFPRTDSNAME Export data set name (for XD/XDC)
ISFPRTDISP Disposition (NEW/OLD/SHR/MOD)
ISFPRTBLKSIZE Default 3120 (27994 is better)
ISFPRTLRECL Default 240
ISFPRTRECFM Default VBA
ISFPRTSPACETYPE Default BLKS
ISFPRTPRIMARY Default 500
ISFPRTSECONDARY Default 500

XD jobname [sysoutdd [stepname [procstep]]

Export and append the sysout of the specified jobname to the dataset specified in REXX special variable ISFPRTDSNAME (see the SET command above).

You can refine the sysout to be selected by sysoutdd, step name, and proc step name.

You must have already issued either DA, I, H, O or ST before you can export spool files.

For example,

Command Description
o
xd myjob
Displays the SDSF output panel columns (subject to filtering by PREFIX etc)
Reads all output spool datasets from MYJOB
xd myjob sysprint Reads only SYSPRINT output from all steps of MYJOB
xd myjob sysprint asmlink Reads only SYSPRINT output from step ASMLINK of MYJOB
xd myjob sysprint asmlink asm Reads only SYSPRINT output from procstep ASM of step ASMLINK of MYJOB

XDC jobname [sysoutdd [stepname [procstep]]

This is the same as XD command except that the output dataset is also Closed.

XF jobname [sysoutdd [stepname [procstep]]

Export and append the sysout of the specified jobname to the pre-allocated DD specified in REXX special variable ISFPRTDDNAME (see the SET command above).

You can refine the sysout to be selected by sysoutdd, step name, and proc step name.

You must have already issued either DA, I, H, O or ST before you can export spool files.

XFC jobname [sysoutdd [stepname [procstep]]

This is the same as XF command except that the output ddname is also Closed.

SHOW ?

List the possible column names for the SDSF primary command last issued (e.g. DA, O, etc)

For example, to list all the available column names for the DA command:

DA
SHOW ?

This is a convenience command so that you don't have to refer to the manual.

SHOW column [column ...]

Display specific columns (for example, JNAME, JOBID, PNAME). Use SHOW ? to list all the valid column names that you can specify for a particular ISPF panel (DA, O, ST, etc).

SHOW ON

Automatically print command output. This is the default.

SHOW OFF

Suppress printing of command output.

SHOW

Display either the contents of the default columns appropriate for the SDSF primary command last issued or the current contents of the line.n variables.

This is useful when you have suppressed displaying responses (using SHOW OFF) and want to display the response for a particular command.

SHOW n

Limit the acquired output to n lines maximum. The default is 1000 lines. This applies to output from all commands (i.e. z/OS command output, USS commands, and lines read from datasets or files). It essentially limits the number of line.n stem variables used.

SHOW heading[,m[,n]]

Prints the heading text followed by lines with line numbers between m and n. The default is to print ALL lines. A negative number is relative to the last line, so for example:

SHOW last few lines,-5

...will print the heading LAST FEW LINES followed by the last 5 lines of output.

SHOW 'str [str ...]'

Prints only output lines that contain at least one of the specified strings.

This is useful when you only want to see messages relating to a limited subject, for example:

show 'LICENSE EXPIR'

...would show lines containing any of 'LICENSE', 'LICENSED', 'UNLICENSED', 'EXPIRED' 'EXPIRES' 'EXPIRATION'.

ASSERT expression

The REXX expression expression is evaluated and if true then the return code is set to 0 (pass), else the return code is set to 4 (fail).

The test expression can be any expression that is valid after a REXX if statement. For example,

ASSERT isPresent('SOMETHING')

  or

ASSERT find('SOMETHING')

...means:

"Set return code 0 if the string 'SOMETHING' is present in the command response, else set return code 4"

IF expression THEN rc = n [; ELSE ...]

This is similar to ASSERT but lets you set whatever return code you want. Note that the PIV step will exit with the highest return code you set by any of the IF, ASSERT, or FAILIF PIV commands.

The IF command has exactly the same syntax as the REXX if statement. The ASSERT example above could be equivalently written as:

if \isPresent('SOMETHING') then rc = 4

...which means:

"If the string 'SOMETHING' is not () present in the command response then set return code 4, else set return code 0"

The ELSE clause is rarely needed and is only included for completeness.

USING template

PASSIF expression

FAILIF expression

You can use a combination of either USING and PASSIF, or USING and FAILIF to check for a response value that may vary from time to time (i.e. is not simply a constant string) and therefore needs to be extracted from the command response and assigned to a REXX variable in order to test it.

  • USING sets the parsing template to be applied to each line of the command response. The template can be anything that is valid after a REXX parse var line.n statement.

  • PASSIF sets the return code to 0 if the REXX expression on PASSIF evaluates to 1 (true), or 4 if the expression evaluates to 0 (false).

  • FAILIF sets the return code to 4 if the REXX expression on FAILIF evaluates to 1 (true), or 0 if the expression evaluates to 0 (false).

For example, you may want to verify that spool usage is acceptable by checking the output of a $DSPOOL JES command, which may look like:

$HASP893 VOLUME(SPOOL1)  STATUS=ACTIVE,PERCENT=23
$HASP646 23.6525 PERCENT SPOOL UTILIZATION

To verify this, you could use:

/$DSPOOL
USING msgno percent .
PASSIF msgno = '$HASP646' & percent < 80

This will cause each line of the command response to be parsed (using parse var line.n msg percent .) causing the first and second words of each line to be assigned to the REXX variables msgno and percent respectively. If a line is found where msgno is '$HASP646' and the percent value is less than 80, then return code 0 is set. If no line containing $HASP646 is found, or the percent value is more than 80, then return code 4 is set.

The processing of command response lines stops when the expression on PASSIF or FAILIF is true.

Alternatively, you could examine the $HASP893 message (which has a lower resolution percentage):

/$DSPOOL
USING msgno . 'PERCENT='percent .
PASSIF msgno = '$HASP893' & percent < 80

This will cause each line of the command response to be parsed and the message number and percent value to be extracted. Processing is similar to the previous example.

Built-in functions

There are a few convenience functions in the PIV REXX procedure that you can use on the ASSERT, IF, PASSIF and FAILIF commands if you want.

You can, of course, use any of the REXX built-in functions too. For example:

subword(line.3,2) = 'HI'
Function Description
find(str) Returns 1 if str is found in any line (else returns 0)
find(str[,str ...]) Returns 1 if ALL strings are found on one line (else returns 0)
isPresent(str) Returns 1 if str is found in any line (else returns 0)
isPresent(str,line.n) Returns 1 if str is found in line.n (else returns 0)
isAbsent(str) Returns 1 if str is not found in any line (else returns 0)
isAbsent(str,line.n) Returns 1 if str is not found in line.n (else returns 0)
isNum(str) Returns 1 if str is an integer (else returns 0)
isWhole(str) Returns 1 if str is an integer (else returns 0)
isHex(str) Returns 1 if str is non-blank hexadecimal (else returns 0)
isAlpha(str) Returns 1 if str is alphanumeric (else returns 0)
isUpper(str) Returns 1 if str is upper case alphabetic (else returns 0)
isLower(str) Returns 1 if str is lower case alphabetic (else returns 0)
isMixed(str) Returns 1 if str is mixed case alphabetic (else returns 0)

About

PIV is a REXX procedure that you can run in batch to verify that a z/OS system is in the state you expect it to be after making a change.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages