MoDaCS

Modular Data Collection System

This package is currently under development.

The goal is to develop a framework that uses a central module/UI to coordinate data acquisition, synchronization with a UAS control system and data storage through a common interface and interchangeable, hardware specific software modules. Utilizing this structure, the system can be easily reconfigured on the fly to meet the needs of a specific platform or operation, eliminating the need to redevelop complete acquisition systems for specific instrument/platform configurations. As an instrument module library develops, adding new hardware to a platform will become as simple as enabling the corresponding software module.

Currently being developed with:

• Python 3.11
• Qt 5.11

Security note: The remote monitoring/control interface is NOT secure in any way and should not be used on a public a network. There is currently no authentication process and the protocol allows almost any Qt signal/slot in the application to be targeted.

Tl;dr, show me some data! (Viewer Mode Quickstart)

1. Install (Python 3)

2. Install PyQt 5, pyqtgraph and numpy

   pip install pyqt5 pyqtgraph numpy
   

3. From the MoDaCS directory, run:

   python .\core\main.py -f .\ExampleData\RunData.json
   

MoDaCS Installation

Get everything at once for all current modules and instruments:

(sudo) pip3 install pyqt5 pyqtgraph paramiko simplekml dronekit seabreeze pyusb pynmea2 rpi_ws281x adafruit-circuitpython-neopixel matplotlib piexif exifread gphoto2 sparkfun-ublox-gps pyulog Pillow tifffile

Requirements:

• python >= 3.9 (https://www.python.org/downloads/)
• pyqt5 (available via pip on Windows or under the package name "python3-pyqt5" on Raspbian)

Optional:

• paramiko (for SFTP)

  Available via pip but depends on cryptography which has some binary dependencies.

  For Raspbain Buster:

    sudo pip3 install paramiko
  

  For Raspbian Jessie:

    sudo apt-get update
    sudo apt-get install build-essential libssl-dev libffi-dev python3-dev
    sudo pip (or pip3) install --upgrade setuptools
    sudo pip (or pip3) install paramiko
  

  Note: this step can take ~20 mins on some Rasp Pi 2 systems while it builds some of the cryptography dependencies

• neopixel (for RGB feedback LED on Raspberry Pi)

  Available from Adafruit: https://learn.adafruit.com/neopixels-on-raspberry-pi/software

• pyqtgraph (allows Viewer Mode to work for most instruments without all dependencies)

  Available via pip

• numpy (allows Viewer Mode to work for most instruments without all dependencies)

  Available via pip

Instrument Modules Information

Running MoDaCS

1. Setup Run Configuration

   The default run configuration is stored in the file "MoDaCS/core/run_cfg.ini". Alternates can be specified at runtime (see step 3).

2. Setup Instrument Configurations

   Instrument configurations are stored in the file(s) "/instrument/inst_cfg.ini".

3. a. Start Remote Client & Server for Data Collection

   For both the client and server, from the MoDaCS directory run "python ./core/main.py". Ensure that the default python installation is >= python 3.4, or specify python3 if necessary. Optionally, use the “-c ” option to use an alternative configuration file. This is useful for keeping both server and client configurations on the same machine. For example: “python ./core/main.py -c ./core/run_cfg_client.ini”.

   On the Raspberry Pi, the default configuration (server) will auto-start from boot. To restart from a terminal, in addition to the command above, run "startx".

   Note: It is recommended to start the client first so that all UI elements are initialized properly. Starting the client after the server will still work without issue, but indicators will be invalid until explicitly updated by the server. The client computer should have the same active instrument modules and instrument configurations as the server.

   OR

   b. Start Viewer Mode To start MoDaCS in viewer mode (to view previously saved data data), from the MoDaCS directory run "python ./core/main.py -o". Ensure that the default python installation is >= python 3.4, or specify python3 if necessary. Alternatively, if running in data collection mode, the File->Load Records menu item will restart MoDaCS in viewer mode. An open file dialog will appear. The "RunData.json" file from the session being opened should be selected.

Run Configuration

(core/run_cfg.ini)

Sections:

• Active Instruments [Active_Insts]

  This section should have a list of the instrument modules available in the current setup and whether or not to load each. For example:

  [Active_Insts]
  camerashutter = True
  spectrometer = False
  pixhawk = True
  raspberrypi = True
  usb2000-pair = True
  ICI_thermal = True

• Data Storage [Data]

  This section requires a single key "Location", which should be the absolute path to the directory where MoDaCS should store data. Optionally, "AutoTransfer" will enable SFTP transfers of a sessions data from a server to client instance. The transfer is initiated when the server instance is ready to close. In a typical setup, a client would issue a remote shutdown command causing a server to stop, transfer data from that session and then shutdown. "SSH_User" and "SSH_Password" must be included to authenticate the SFTP connection.

  For example:

  [Data]
  Location = C:\temp\MoDaCS Data
  AutoTransfer = True
  SSH_User = pi
  SSH_Password =

• Event Handlers [Events]

  This section should contain a list of the event handlers included in "event_handlers.py" and inputs and outputs they use, as well as “direct connetions”. For example:

  #Event: Inputs (comma separated); Outputs (comma separated)
  #Direct Connection: Input -> Output

  [Events]
  shutterspeed: pixhawk.shutter; camerashutter.shutterspeed
  auto_trig: pixhawk.trigger->GlobalTrigger
  dig_trig: raspberrypi.digitalTrig->GlobalTrigger
  fileName: user_input.fileName->ici_thermal.fileName

• UI Options [UI] (optional)

  Key	Options	Description
  Size	-large -small	Determines the UI size mode. "Small" is designed as a limited interface for a 320x240 fixed display while "large" operates like a typical resizable desktop application.
  WaitForNTP	True/False	When running on an ARM based device, tries to contact an NTP server to sync time before starting to record data. (Times out after 1 minute.)

  For example:

  [UI]
  Size = large
  WaitForNTP = True

• Server Options [Server]

  Key	Options	Description
  Enabled	True/False	Sets whether or not this instance should run as a server
  TCP_Server_IP	IP Address	The server IP to use (the IP of this computer). This options exists to differentiate between different networks when multiple network adapters are active.
  TCP_Server_Port	0-65535	The server (local) port to use
  TCP_Client_IP	IP Address	The client IP to use (the IP of the remote computer).
  TCP_Client_Port	0-65535	The client port to use
  AllowControl	True/False	Sets whether or to allow remote clients to control this instance

  For example:

  [Server]
  Enabled = True
  TCP_Server_IP = 192.168.1.101
  TCP_Client_IP = 192.168.1.100
  TCP_Server_Port = 9400
  TCP_Client_Port = 9400
  AllowControl = True

• Remote Client Options [Client]

  Key	Options	Description
  Enabled	True/False	Sets whether or not this instance should run as a remote client
  TCP_Server_IP	IP Address	The remote server IP to use.
  TCP_Server_Port	0-65535	The remote server port to use
  TCP_Client_IP	IP Address	The client IP to use (the IP of this computer). This options exists to differentiate between different networks when multiple network adapters are active.
  TCP_Client_Port	0-65535	The client (local) port to use
  ProvideControl	True/False	Sets whether or to send remote control commands to server

  For example:

  [Client]
  Enabled = True
  TCP_Server_IP = 192.168.1.101
  TCP_Client_IP = 192.168.1.100
  TCP_Server_Port = 9400
  TCP_Client_Port = 9400
  ProvideControl = True

  Note on Server/Client configuration: TCP_Server_IP and TCP_Server_Port are mostly redundant and should almost always be the same for both the Server and Client modules. The same applies to TCP_Client_IP and TCP_Client_Port.

• Run Instrument in Main Thread [MainThread] (optional, for debugging only)

  This section should be a list of instrument modules that (if set to True) will NOT be run in their own thread (and will instead stay in the main UI thread). This can help to catch breakpoints when debugging in certain circumstances. For example:

  [MainThread]
  usb2000-pair = True