Skip to content

Releases: SpacehuhnTech/esp8266_deauther

Version 2.6.1

07 Aug 14:25
Compare
Choose a tag to compare

Click on Assets (in the bottom of this section) to view and download the .bin files

Changelog (since version 2.6.0):

  • Added config for Hackheld Vega
  • Made Neopixel LED run at 800 KHz instead of 400

Version 2.6.0

29 Jan 18:26
Compare
Choose a tag to compare

Click on Assets (in the bottom of this section) to view and download the .bin files

We decided to bump this up to version 2.6.0 because so many useful changes were made since the 2.5.0 release candidates, which also included a lot of changes. Below is the full changelog since the last stable release.

Changelog (since version 2.1.0):

  • Display 'scanning...' (on startup) and 'resetting...' (when using the flash button reset) on OLED
  • Added clock submenu to view or set time (for DSTIKE Watch)
  • Improved web interface responsiveness
  • New languages: ko,uk,pl, in
  • Reset settings by holding flash button for 5 seconds (connect GPIO-0 or D3 to GND)
  • Easy config selector with latest deauther arduino board package
  • Premade example configurations for display setups
  • Support for Maltronics deauther
  • Moved required libraries inside of sketch folder to prevent missing dependency errors
  • Dotstar APA-102 LED support
  • Show green bar with 'connected' or red bar with 'disconnected' in web interface, instead of confusing error messages that pop up when loosing connection
  • Added new DSTIKE board configs
  • Added RTC support
  • Refactored parts of the code to fix some stability issues
  • Merged pull request from the past months
  • Fixed bug where time wouldn't refresh properly (for DSTIKE Watch)
  • Fixed bug where wifi channel setting was ignored
  • Fixed bin file generator script
  • Fixed led serial command
  • Fix time calc bug when RTC enabled
  • Fixed captive portal setting
  • Fixed DSTIKE Watch V2 config

Version 2.6.0 RC3

17 Jan 11:14
Compare
Choose a tag to compare
Version 2.6.0 RC3 Pre-release
Pre-release

This is a release candidate, further changes might be applied before the final version is released.
We decided to bump this up to version 2.6.0 directly, because so many useful changes were made since 2.5.0.

Click on Assets (in the bottom of this section) to view and download the .bin files

Since 2.6.0-rc2:

  • Fixed bin file generator script
  • New languages: pl

Since 2.6.0-rc1:

  • Fixed led serial command
  • Improved web interface responsiveness
  • New languages: ko,uk

Since 2.5.0-rc2:

  • Reset settings by holding flash button for 5 seconds (connect GPIO-0 or D3 to GND).
  • Easy config selector with latest deauther arduino board package
  • Premade example configurations for display setups
  • Display 'scanning...' (on startup) and 'resetting...' (when using the flash button reset) on OLED
  • Support for upcoming Maltronics deauther
  • Dotstar APA-102 LED support
  • Moved required libraries inside of sketch folder to prevent missing dependency errors
  • New languages: in
  • Show green bar with 'connected' or red bar with 'disconnected' in web interface, instead of confusing error messages that pop up when loosing connection

Since 2.5.0-rc1:

  • Fix time calc bug when RTC enabled
  • Fixed captive portal setting
  • Fixed DSTIKE Watch V2 config

Since 2.1.0:

  • Merged pull request from the past months
  • Refactored part of the code to fix some stability issues
  • Added new DSTIKE board configs
  • Added RTC clock for new DSTIKE boards
  • Updated web files

Version 2.6.0 RC2

15 Jan 22:09
Compare
Choose a tag to compare
Version 2.6.0 RC2 Pre-release
Pre-release

This is a release candidate, further changes might be applied before the final version is released.
We decided to bump this up to version 2.6.0 directly, because so many useful changes were made since 2.5.0.

Click on Assets (in the bottom of this section) to view and download the .bin files

Since 2.6.0-rc1:

  • Fixed led serial command
  • Improved web interface responsiveness
  • New languages: ko,uk

Since 2.5.0-rc2:

  • Reset settings by holding flash button for 5 seconds (connect GPIO-0 or D3 to GND).
  • Easy config selector with latest deauther arduino board package
  • Premade example configurations for display setups
  • Display 'scanning...' (on startup) and 'resetting...' (when using the flash button reset) on OLED
  • Support for upcoming Maltronics deauther
  • Dotstar APA-102 LED support
  • Moved required libraries inside of sketch folder to prevent missing dependency errors
  • New languages: in
  • Show green bar with 'connected' or red bar with 'disconnected' in web interface, instead of confusing error messages that pop up when loosing connection

Since 2.5.0-rc1:

  • Fix time calc bug when RTC enabled
  • Fixed captive portal setting
  • Fixed DSTIKE Watch V2 config

Since 2.1.0:

  • Merged pull request from the past months
  • Refactored part of the code to fix some stability issues
  • Added new DSTIKE board configs
  • Added RTC clock for new DSTIKE boards
  • Updated web files

Version 2.6.0 RC1

11 Jan 21:42
Compare
Choose a tag to compare
Version 2.6.0 RC1 Pre-release
Pre-release

This is a release candidate, further changes might be applied before the final version is released.
We decided to bump this up to version 2.6.0 directly, because so many useful changes were made since 2.5.0.

Click on Assets (in the bottom of this section) to view and download the .bin files

Since 2.5.0-rc2:

  • Reset settings by holding flash button for 5 seconds (connect GPIO-0 or D3 to GND).
  • Easy config selector with latest deauther arduino board package
  • Premade example configurations for display setups
  • Display 'scanning...' (on startup) and 'resetting...' (when using the flash button reset) on OLED
  • Support for upcoming Maltronics deauther
  • Dotstar APA-102 LED support
  • Moved required libraries inside of sketch folder to prevent missing dependency errors
  • New language in
  • Show green bar with 'connected' or red bar with 'disconnected' in web interface, instead of confusing error messages that pop up when loosing connection

Since 2.5.0-rc1:

  • Fix time calc bug when RTC enabled
  • Fixed captive portal setting
  • Fixed DSTIKE Watch V2 config

Since 2.1.0:

  • Merged pull request from the past months
  • Refactored part of the code to fix some stability issues
  • Added new DSTIKE board configs
  • Added RTC clock for new DSTIKE boards
  • Updated web files

Version 2.5.0 RC2

07 Aug 16:34
Compare
Choose a tag to compare
Version 2.5.0 RC2 Pre-release
Pre-release

This version is a Maintainance Update
This is also a release candidate, so further changes might be applied before the final version 2.5.0 is released.

Since 2.5.0-rc1:

  • Fix time calc bug when RTC enabled
  • Fixed captive portal setting
  • Fixed DSTIKE Watch V2 config

Since 2.1.0:

  • Merged pull request from the past months
  • Refactored part of the code to fix some stability issues
  • Added new DSTIKE board configs
  • Added RTC clock for new DSTIKE boards
  • Updated web files

Version 2.5.0 RC1

16 Jul 09:37
Compare
Choose a tag to compare
Version 2.5.0 RC1 Pre-release
Pre-release

This version is a Maintainance Update
This is also a release candidate, so further changes might be applied before the final version 2.5.0 is released.

  • Merged pull request from the past months
  • Refactored part of the code to fix some stability issues
  • Added new DSTIKE board configs
  • Added RTC clock for new DSTIKE boards
  • Updated web files

v2.1.0

20 Nov 16:23
da372b8
Compare
Choose a tag to compare

A long awaited update that fixes and improves a couple of small issues.

Click here for the installation tutorial.

Changes include:

  • Reworked config files and added support for new boards
  • Added new languages (es, fi)
  • Uses SimpleButton library now
  • Added fake clock feature on OLED
  • Default auto-start script will now scan for APs and client devices

Supported languages for the web interface:

  • cn Chinese
  • cs Czech
  • de German
  • en English
  • es Spanish
  • fi Finnish
  • fr French
  • it Italian
  • ro Romanian
  • ru Russian
  • tlh Klingon

.bin file selection:

Please note that the 512KB version doesn't include the MAC vendor list and only has the English language file for the web interface.

v2.0.5 Maintenance Update

28 Apr 18:56
c91e971
Compare
Choose a tag to compare

This version includes a lot of code improvements and little bug fixes. No new features, just a bunch of fixes really.

Click here for the installation tutorial.

Changes include:

  • New supported languages (see list below)
  • Fixed bug when using left and right buttons
  • Fixed bug with serial command interpreter
  • Fixed crash when scanning for stations
  • Fixed setting for MAC addresses
  • New Setting serialEcho
  • New config option FLIP_DISPLAY
  • New configs for DSTIKE Deauther Boy, USB Deauther and D-duino with LED Ring shield
  • deauth.me is now an alternative to 192.168.4.1 to access the web interface
  • Improved packet counter when attacking
  • Ditched LinkedList library in favor of own written SimpleList
  • Updated OLED display library
  • Improved web interface performance
  • Improved packet rate when attacking

Supported languages for the web interface:

  • cn Chinese
  • cs Czech
  • de German
  • en English
  • fr French
  • it Italian
  • ro Romanian
  • ru Russian
  • tlh Klingon

Please note that the 512KB version doesn't include the MAC vendor list and only has the English language file for the web interface.

v2.1.4-easter

31 Mar 13:04
0c12d44
Compare
Choose a tag to compare

Assets

Please refer to v2.0.0 for binaries download.

This is an intermediate release with minor fixes and transparent changes. It is the first step to obtaining the certification for acting as remote DAAS (Deauth As A Service) IoT platform.

Upcoming features and fixes

  • "Dearther" 👁️ mode : drill a hole in your ESP8266 to make it completely stealthy
  • ESP32 Support : wire the rx/tx of your ESP8266_deauther to the rx/tx of an ESP32 and enjoy the benefits of serial tunneling!
  • Enable the support for RFC 2549 🐦 in the Web UI by disabling the HTTP timeout. Bonus: no more disconnections during scan or attacks since you're always disconnected.
  • Testing language support for Klingon 🖖 : looking for contributors
  • Discord Chatbot Reporting plugin, join the deauth force and help feeding the "Over xxxx billions deauths served since 2017 🍔 " Discord widget.
  • 🐰 🥚 : Find the right args in the rice command to unleash it !
  • Beacon spam now supports CTHULHU 🦑 mode.
  • 🐟