README.en.md

qBittorrent-ClientBlocker

中文 (默认, Beta 版本) English (Default, Beta Version)
中文 (Public 正式版) English (Public version)

A client blocker compatible with qBittorrent (4.1+)/Transmission (3.0+, Beta)/BitComet (2.0+, Beta, Partial), which is prohibited to include but not limited to clients such as Xunlei.

• Support many platforms
• Support log and hot-reload config
• Support ignore private ip
• Support custom blockList (Case-Inensitive, Support regular expression)
• Supports a variety of clients and their authentication, and can automatically detect some clients (errors that occur when detecting clients can be ignored)
• Support enhanced automatic ban (Default disable): Automatically ban peer based on the default or set related parameter
• Under Windows, support show and hide window through systray or window hotkey (Ctrl+Alt+B) (Some users feedback it may affect ban. Due to unknown reason, the function can be avoided if related problem are encountered)

使用 Usage

Prerequisite

• Client Web UI must be enabled.

Use conventional version

1. Download compressed from GitHub Release and decompress it;

   View common platform download version of comparison table

   OS	Processor Arch	Processor Integers	Download Version	Note
   macOS	ARM64	64-bit	darwin-arm64	Common in Apple M series
   macOS	AMD64	64-bit	darwin-amd64	Common in Intel series
   Windows	AMD64	64-bit	windows-amd64	Common in most modern PC
   Windows	i386	32-bit	windows-386	Occasionally on some old PC
   Windows	ARM64	64-bit	windows-arm64	Common on new platform, it's applied to some tablet/notebooks/minority special hardware
   Windows	ARMv6	32-bit	windows-arm	Rare platform, applied to some ancient hardware, such as Surface RT, etc
   Linux	AMD64	64-bit	linux-amd64	Common NAS and server
   Linux	i386	32-bit	linux-386	Rarely in some old NAS and server
   Linux	ARM64	64-bit	linux-arm64	Common server and development board, such as Oracle or Raspberry Pi, etc
   Linux	ARMv*	32-bit	linux-armv*	Rarely in some old server and development board, Check /proc/cpuinfo or try which version can run from high to low

   Other versions of Linux/Netbsd/FreeBSD/OpenBSD/Solaris can use this form as an example, and select one that suits you in the list.

2. After decompression, you may need to modify the attached config file config.json;

   • You can set config according to high-level needs. See 配置 Config.
   • If blocker runs on this machine, but client "Skip client certification" is disabled (and password is not empty and does not manually set password in blocker), you must modify config file and fill in clientPassword.
   • If blocker is not running on this machine or client is not installed on the default path or using blocker with 2.4 and below version, config file must be modified and fills in clientURL/clientUsername/clientPassword.

3. Start blocker and observe whether the information output is normal;

   For Windows, you can choose shortcut of client, put your own blocker path, and run client and blocker at the same time;

   qBittorrent: C:\Windows\System32\cmd.exe /c "(tasklist | findstr qBittorrent-ClientBlocker || start C:\Users\Example\qBittorrent-ClientBlocker\qBittorrent-ClientBlocker.exe) && start qbittorrent.exe"

   For macOS, You can choose a basic LaunchAgent for starting from OS start and background run;

   For Linux, You can choose a basic Systemd service for starting from OS start and background run;

Use Docker version

• Pull image from Docker Hub.

  docker pull simpletracker/qbittorrent-clientblocker:latest
  

• Configuration method 1: Use config file mapping

  1. Create a new config.json in right location, as a configuration file, the specific config can refer config.json and 配置 Config;

  2. Fills in clientURL/clientUsername/clientPassword;

     • You can set config according to high-level needs. See 配置 Config.
     • If client "IP subnet whitelist" is enabled, you don't need fill in clientUsername and clientPassword.

  3. Run docker image and view log to observe whether the information output is normal;

     The following command templates are used as a reference only, please replace /path/config.json to your config path.

     docker run -d \
         --name=qbittorrent-clientblocker --network=bridge --restart unless-stopped \
         -v /path/config.json:/app/config.json \
         simpletracker/qbittorrent-clientblocker:latest
     

• Configuration method 1: Use environment variable

  • Prerequisite: Set the useENV environment variable is true.

  • Use environment variables to configure settings on demand. For details, see 配置 Config.

  • If config is complicated, blockList may not take effect. Therefore, if you need to configure this setting, it's not recommended to use environment variable.

  • The following command templates are used as a reference only.

    docker run -d \
        --name=qbittorrent-clientblocker --network=bridge --restart unless-stopped \
        -e debug=false \
        -e logPath=logs \
        -e blockList='["ExampleBlockList1", "ExampleBlockList2"]' \
        -e clientURL=http://example.com \
        -e clientUsername=exampleUser \
        -e clientPassword=examplePass \
        simpletracker/qbittorrent-clientblocker:latest
    

参数 Flag

Parameter	Default	Note
-v/--version	false	Show program version and exit
-c/--config	config.json	Config path
-ca/--config_additional	config_additional.json	Additional config path
--debug	false	Debug mode. Effective before loading config file
--startdelay	0 (Sec, Disable)	Start delay. Special uses for some user
--nochdir	false	Don't change working directory. Change to the program directory by default
--hidewindow	false	Hide window by default. Only available on Windows
--hidesystray	false	Hide systray by default. Only available on Windows

配置 Config

Docker version is configured through the same name variable configuration, which actually is implemented by automatically conversion environment variable as config file.

Parameter	Type	Default	Note
checkUpdate	bool	true	Check update. Automatically checks for update by default
debug	bool	false	Debug mode. Enable you can see more information, but it may disrupt the field of vision
debug_CheckTorrent	string	false	Debug mode (CheckTorrent, must enable debug). If it's enabled, debug info will include each Torrent Hash, but the amount of information will be large
debug_CheckPeer	string	false	Debug mode (CheckPeer, must enable debug). If it's enabled, debug info will include each Torrent Peer, but the amount of information will be large
interval	uint32	6 (秒)	Ban Check Interval (Hot-reload is not supported). Each cycle interval will obtain relevant information from Web UI for judgment and blocking. Short interval can help reduce ban time but may cause client to freeze, but Long interval can help reduce CPU usage
cleanInterval	uint32	3600 (Sec)	Clean blocked peer interval. Short interval will cause expired Peer to be unblocked faster after blocking duration is reached, but Long interval will help merge and clean up expired Peer log
updateInterval	uint32	86400 (Sec)	List URL update interval (ipBlockListURL/blockListURL). Reasonable intervals help improve update efficiency and reduce network usage
torrentMapCleanInterval	uint32	60 (Sec)	Torrent Map Clean Interval (Only useful after enable ipUploadedCheck+ipUpCheckPerTorrentRatio/banByRelativeProgressUploaded, It's also the judgment interval). Short interval can make judgments more frequent but may cause delayed misjudgments
banTime	uint32	86400 (Sec)	Ban duration. Short interval will cause peer to be unblocked faster
banAllPort	bool	true	Block IP all port. Enabled by default and setting is not currently supported
banIPCIDR	string	/32	Block IPv4 CIDR. Used to expand Peer’s block IP range
banIP6CIDR	string	/128	Block IPv6 CIDR. Used to expand Peer’s block IP range
ignoreEmptyPeer	bool	true	Ignore peers without PeerID and ClientName. Usually occurs on clients where connection is not fully established
ignoreNoLeechersTorrent	bool	true	Ignore torrent without leechers. Enabling can improve performance
ignorePTTorrent	bool	true	Ignore PT Torrent. If the main Tracker contains ?passkey=/?authkey=/?secure=/A string of 32 digits consisting of uppercase and lowercase char or/and number
sleepTime	uint32	20 (MicroSec)	Query waiting time of each Torrent Peers. Short interval can make blocking Peer faster but may cause client lag, Long interval can help average CPU usage
timeout	uint32	6 (MillSec)	Request timeout. If interval is too short, peer may not be properly blocked. If interval is too long, timeout request will affect blocking other peer
longConnection	bool	true	Long connection. Enable to reduce resource consumption
logToFile	bool	true	Log general information to file. If enabled, it can be used for general analysis and statistical purposes
logDebug	bool	false	Log debug information to file (Must enable debug and logToFile). If enabled, it can be used for advanced analysis and statistical purposes, but the amount of information is large
listen	string	:26262	Listen port. Used to provide BlockPeerList to some client
clientType	string	Empty	Client type. Prerequisite for using blocker, if client config file cannot be automatically detect, must be filled in correctly. Currently support qBittorrent/Transmission/BitComet
clientURL	string	Empty	Web UI or RPC Address. Prerequisite for using blocker, if client config file cannot be automatically read, must be filled in correctly. Prefix must specify http or https protocol, such as http://127.0.0.1:990 or http://127.0.0.1:9091/transmission/rpc
clientUsername	string	Empty	Web UI Username. Leaving it blank will skip authentication. If you enable client "Skip local client authentication", you can leave it blank by default, because the client config file can be automatically read and set
clientPassword	string	Empty	Web UI Password. If client "Skip local client authentication" is enabled, it can be left blank by default
useBasicAuth	bool	false	At the same time, authentication is performed through HTTP Basic Auth. It can be used to add/replace authentication method of Web UI through reverse proxy, etc
skipCertVerification	bool	false	Skip Web UI certificate verification. Suitable for self-signed and expired certificates
fetchFailedThreshold	int	0 (Disable)	Maximum number of fetch failures. When set number is exceeded, execCommand_FetchFailed will be executed
execCommand_FetchFailed	string	Empty	Execute external command (FetchFailed). First parameter is regarded as an external program path, execute the command when number of fetch failures exceeds set threshold
execCommand_Run	string	Empty	Execute external command (Run). First parameter is regarded as an external program path, execute the command when program starts
execCommand_Ban	string	Empty	Execute external command (Ban). First parameter is regarded as an external program path, and each parameter should be separated by |, command can use {peerIP}/{peerPort}/{torrentInfoHash} to use related info (peerPort=-1 means ban all port)
execCommand_Ban	string	Empty	Execute external command (Ban). First parameter is regarded as an external program path, and each parameter should be separated by |, command can use {peerIP}/{peerPort}/{torrentInfoHash} to use related info (peerPort=-1 means ban all port)
execCommand_Unban	string	Empty	Execute external command (Unban). First parameter is regarded as an external program path, and each parameter should be separated by |, command can use {peerIP}/{peerPort}/{torrentInfoHash} to use related info (peerPort=-1 means ban all port)
syncServerURL	string	Empty	Sync server URL. Sync server will submit TorrentMap to server and receive BlockIPCIDR from server
syncServerToken	string	Empty	Sync server Token. Some sync server may require authentication
blockList	[]string	Empty (Included in config.json)	Block client list. Judge PeerID or ClientName at the same time, case-insensitive, support regular expression
blockListURL	string	Empty	Block client list URL. Support format is same as blockList, one rule per line
portBlockList	[]uint32	Empty	Block port list. If peer port matches any of ports, Peer will be automatically block
ipBlockList	[]string	Empty	Block IP list. Support excluding ports IP (1.2.3.4) or IPCIDR (2.3.3.3/3)
ipBlockListURL	string	Empty	Block IP list URL. Support format is same as ipBlockList, one rule per line
genIPDat	uint32	0 (Disable)	1: Generate IPBlockList.dat. Include All Peer IPCIDR, support format is same as ipBlockList; 2: Generate IPFilter.dat. Include All Peer IP; One rule per line
ipUploadedCheck	bool	false	IP upload incremental detection. After the following IP upload incremental conditions are met, Peer will be automatically block
ipUpCheckInterval	uint32	300 (Sec)	IP upload incremental detection/Interval. Used to determine the previous cycle and the current cycle to compare Peer's IP upload increment. It is also used for maxIPPortCount
ipUpCheckIncrementMB	uint32	38000 (MB)	IP upload incremental detection/Increment size. If the IP global upload increment size is greater than the set increment size, Peer will be automatically block
ipUpCheckPerTorrentRatio	float64	3 (X)	IP upload incremental detection/Increment ratio. If the IP single torrent upload increment size is greater than the product of the set increment ratio and the torrent size, Peer will be automatically block
maxIPPortCount	uint32	0 (Disable)	Maximum number of ports per IP. If the number of IP ports is greater than the set value, Peer will be automatically block
banByProgressUploaded	bool	false	Enhanced automatic blocking (blocking Peer based on progress and uploaded, not verified by testing). After the following enhanced automatic blocking conditions are met, Peer will be automatically blocked
banByPUStartMB	uint32	20 (MB)	Enhanced automatic blocking/Start size. If the client uploaded is greater than the set initial size, Peer will be automatically block
banByPUStartPrecent	float64	2 (%)	Enhanced automatic blocking/Start progress. If the client upload progress is greater than the set start progress, Peer will be automatically block
banByPUAntiErrorRatio	float64	3 (X)	Enhanced automatic blocking/Lag anti-misjudgment ratio. If the downloaded obtained by the Peer's reported download progress multiplied by the set ratio and the torrent size is lower than Peer's uploaded, Peer will be automatically block
banByRelativeProgressUploaded	bool	false	Enhanced automatic blocking_Relative (Block Peer based on relative progress and relative uploaded, not verified by testing). After the following Enhanced automatic blocking_Relative conditions are met, Peer will be automatically block
banByRelativePUStartMB	uint32	20 (MB)	Enhanced automatic blocking_Relative/Start size. If the relative uploaded of the client is greater than the set start size, Peer will be automatically block
banByRelativePUStartPrecent	float64	2 (%)	Enhanced automatic blocking_Relative/Start progress. If the relative upload progress of the client is greater than the set start progress, Peer will be automatically block
banByRelativePUAntiErrorRatio	float64	3 (X)	Enhanced automatic blocking_Relative/Lag anti-misjudgment ratio. If the relative download progress obtained by the product of the relative download progress reported by the peer and the set ratio is lower than the relative upload progress of the client, Peer will be automatically block
ignoreByDownloaded	uint32	100	Enhanced automatic blocking*/Max downloaded. If downloaded from Peer is greater than this value, enhanced automatic blocking will be skipped

反馈 Feedback

User and developer can report bug through Issue, ask/discuss/share usage through Discussion, contribute code improvement to blocker through Pull Request.
Note: Should be based on dev branch. When opening a Pull Request for a Feature, please do not create an Issue simultaneously.

致谢 Credit

1. We partially referenced jinliming2/qbittorrent-ban-xunlei during early development of blocker. We may also refer to other similar project to optimize this project, but they will not be listed separately here;
2. We will thank the user and developer who contributed code improvement to blocker through Pull Request in Release Note;