Skip to content

Adapter to map the inputs and outputs of the B-JointSP to the simulator interface

Notifications You must be signed in to change notification settings

RealVNF/bjointsp-adapter

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

85 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Build Status

BJointSP-adapter Advanced

Adapter to map the inputs and outputs of the B-JointSP to the simulator interface

B-JointSP should work with the flow-level simulator, ie, be aligned to the interface. This requires mapping the simulator state into something B-JointSP understands and mapping B-JointSP's outputs/placement into something the simulator understands.

Working Details

BjoinSP-adapter does the conversion in the following order:

  1. Calls BjoinSP's place function with the following parameters:

    1. network file: path to the file
    2. template:path to the file created (just created once and used for every subsequent call to place) with the following assumptions/adjustments:
    3. Each VNF has no memory (for simplicity)
    4. An artificial VNF vnf_source having no vnf_delay is added and connected to the first VNF of the SFC
    5. For each VNF, vnf_delay = processing_delay_mean from the config file
    6. VNFs only have a forward link
    7. The vnf_links has a very high max_delay = 1000
    8. source : path to a first source file. Since we at the beginning don't have any traffic information from the simulator we have to create this file statically. Each ingress node in the network is assumed to be a source having a single VNF vnf_source and the number of flows is calculated by calculating the number of overlapping flows as follows: overlapping_flows = math.ceil((num_flows * (processing_delay + flow_duration))/run_duration)
      • number of flows: is given by the simulator in the traffic_info
      • processing_delay: taken from the service_function file
      • flow_duration: (flow_size / flow_dr_mean) * 1000
      • run_duration: taken from the config file
    9. cpu = mem = node_capacity from the network file
    10. It gets the NetworkX object from the simulator, including the node and link capacities.
  2. The results of the place call from step 1. above are used to create the placement and schedule for the simulator as follows:

    1. placement: The placements are simply obtained from the result of place call.
    2. schedule: Since BJointSP does not return any schedule we have create it from the flows information returned by place. We assume that there is only a single SFC for simplicity. flows keeps track of the number of flows forwarded by BJointSP from a source_node to a dest_node. The schedule is created for each source node, for each VNF in the SFC, for each destination node. If a flow exits in flows from source node to destination node for a requested VNF we add it to the schedule. We use the probabilities normalization function normalize_scheduling_probabilities such that for each SF the sum of Probabilities is 1
  3. The schedule and placement from step 2. are used to call the apply function of the simulator.

  4. The result (traffic info.) of the apply call from step 3. are used to create the sources for the next call to BjoinSP's place function. The sources are created as follows:

    1. For each ingress node, if the first SF (in our cases a) has some aggregate dr , we calculate the number of overlapping flows as follows:

      overlapping_flows = math.ceil((num_flows * (processing_delay + flow_duration))/run_duration)

    We then place overlapping_flows number of flows, each of dr = flow_dr_mean on that ingress node with a single VNF vnf_source

    1. If traffic_info has no dr for a on any ingress node, then the source file would be empty
  5. If the source is created in step 4. we use it to call BJointSP's place and repeat step 2, 3, & 4.

  6. If the source is not created in step 4., the previously calculated schedule and placement is used to make the next call to the simulator's apply.

Note: By calculating the overlapping_flows we can run the adapter with any run_duration. B-JointSP expects flows that are specified as sources to run in parallel and be competing for resources. A flow is competing for resources while it's being processed by a VNF. So by calculating the number of overlapping_flows we know how many parallel flows that BJointSP needs to cater to.

Setup

Install Python 3.6 and venv modules.

Recommended for development: Clone and install coord-sim, common-utils, and BJointSP locally first in the same venv before running the installation of the adapter in the editable mode: pip install -e bjointsp-adapter

# clone this repo and enter dir
git clone [email protected]:RealVNF/bjointsp-adapter.git
cd bjointsp-adapter

# create and activate virtual environment
## On Windows
python -m venv venv
.\venv\Scripts\activate

## On Linux and macOS
python3 -m venv venv
source venv/bin/activate

# install package
pip install -r requirements.txt

This also installs the required coord-sim simulator, common-utils, and BJointSP package.

Usage

usage: bjointsp-adapter [-h] [-i ITERATIONS] [-s SEED] -n NETWORK -sf
                        SERVICE_FUNCTIONS -c CONFIG

BJointSP Adapter

optional arguments:
  -h, --help            show this help message and exit
  -i ITERATIONS, --iterations ITERATIONS
  -s SEED, --seed SEED
  -n NETWORK, --network NETWORK
  -sf SERVICE_FUNCTIONS, --service_functions SERVICE_FUNCTIONS
  -c CONFIG, --config CONFIG

Use the following command as an example (from within bjointsp-adapter project folder):

bjointsp-adapter -n "res/networks/triangle.graphml" \
            -sf "res/service_functions/abc.yaml" \
            -c "res/config/sim_config.yaml" \
            -i 50

This will run the bjointsp-adapter and call the apply() of the sim-interface and the place() of BJointSP 50 times.

Using the parallel script to run multiple experiments:

There is script provided in the scripts folder that utilizes the GNU Parallel utility to run multiple experiments at the same time to speed up the process. It can run one algorithm at a time, so you need to choose the algo you wanna run at the beginning of the file.

From scripts directory configure the following files:

  • network_files: 1 network file location per line
  • config_files: 1 simulator config. file location per line
  • service_files: 1 SFC file location per line
  • 30seeds: 1 seed per run of the simulator. By default using 30 seeds. Add/Remove as per requirement

From the main directory (where the README.md file is) using a Terminal run:

bash scripts/run_parallel

Acknowledgement

This project has received funding from German Federal Ministry of Education and Research (BMBF) through Software Campus grant 01IS17046 (RealVNF).

About

Adapter to map the inputs and outputs of the B-JointSP to the simulator interface

Topics

Resources

Stars

Watchers

Forks

Packages

No packages published