---

Equalizer Click

• CIC Prefix : EQUALIZER
• Author : Katarina Perendic
• Verison : 1.0.0
• Date : dec 2018.

---

Software Support

We provide a library for the Equalizer Click on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Library Description

The library includes function sets the volume for the selected channel, uses two variables or one volume variable. The user has a function for mute/unmute sounds, default settings and function for clears all registers.

Key functions :

• void equalizer_setVolumeFull(uint8_t channel, int8_t volume) - Set volume for the channel
• void equalizer_defaultConfiguration() - Default configuration
• void equalizer_mute(uint8_t mute) - Mute and Unmute

Examples Description

The application is composed of three sections :

• System Initialization - Initialzes I2C module

• Application Initialization - Initialization driver init, default configuration and sets first volume.

• Application Task - Waits for valid user input and executes functions based on set of valid commands

• Commands : '+' - volume up '-' - volume down 'x' - channel up 'z' - channel down 'm' - mute and unmute

void applicationTask()
{
    uint8_t dataReady_;
    char receivedData_;
    
    dataReady_ = UART_Rdy_Ptr( );

    if (dataReady_ != 0)
    {
        receivedData_ = UART_Rd_Ptr( );

        switch (receivedData_)
        {
            case 'z' :
            {
                /* Change channel */
                _channel --;
                if(_channel < 1)
                {
                    _channel = 1;
                }
                _playFlag = 1;
                break;
            }
            case 'x' :
            {
                /* Change channel */
                _channel ++;
                if(_channel > 6)
                {
                    _channel = 6;
                }
                _playFlag = 1;
                break;
            }
            case '+' :
            {
                /* Set volume */
                _volume++;
                if(_volume > 0)
                {
                    _volume = 0;
                }
                _playFlag = 1;
                break;
            }
            case '-' :
            {
                /* Set volume */
                _volume--;
                if(_volume < -79)
                {
                    _volume = -79;
                }
                _playFlag = 1;
                break;
            }
            case 'm' :
            {
                _mute();
                break;
            }
        }
        _play();
    }
}

Additional Functions :

• void _getCurrentChannel( ) - Return current channel
• void _play( ) - Start new settings of the channel
• void _mute( ) - mute and unmute

The full application code, and ready to use projects can be found on our LibStock page.

Other mikroE Libraries used in the example:

• I2C
• UART
• Conversions

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---

---