was developed in FREMO to assign a vehicle to a LocoNET-throttle independently of a DCC command station.
Version 2.0 (and higher) was developed for the usage on an Arduino-UNO or a compatible board.
Version 2.1 supports the reading of Parameters from FREDI using the LNSV2-protocol (OLED is requested then).
Version 2.2 supports the reading of Parameters from FREDI using the LNSV2-protocol either with OLED or LCD.
In Dispa.ino you can select whether the software should be compiled
- for usage with LCD or OLED.
- with or without reading FREDI-SVs.
For the meaning of SVs please refer to chapter 2.3 "FREDI-Diagnose" in the manual
DISPA requires my libraries listed below in addition to various Arduino standard libraries:
The original files developed by FREMO for DISPA can be found here:
https://sourceforge.net/p/embeddedloconet/svn/HEAD/tree/old-cvs/trunk/apps/Dispa/
the original schematics can be found here:
https://sourceforge.net/p/fremodcc/svn/HEAD/tree/Dispa/trunk/