Skip to content
/ NPB-CPP Public

The NAS Parallel Benchmarks for evaluating C++ parallel programming frameworks on shared-memory architectures

License

Notifications You must be signed in to change notification settings

GMAP/NPB-CPP

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

9 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

The NAS Parallel Benchmarks for evaluating C++ parallel programming frameworks on shared-memory architectures

The NPB's Fortran codes were carefully ported to C++ and are fully compliant to the NPB3.4.1 version (NPB official webpage). Our paper contains abundant information on how the porting was conducted and discusses the outcome performance we obtained with NPB-CPP on different machines (Intel Xeon, AMD Epyc, and IBM Power8) and compilers (GCC, ICC, and Clang). Results showed that we achieved similar performance with NPB-CPP compared to the original NPB. You can use our paper, along with the official reports, as a guide to assess performance using the NPB suite.

How to cite this work

[DOI] J. Löff, D. Griebler, G. Mencagli et al., The NAS Parallel Benchmarks for evaluating C++ parallel programming frameworks on shared-memory architectures, Future Generation Computer Systems (FGCS) (2021)

This is a repository aimed at providing parallel codes with different C++ parallel programming APIs for the NAS Parallel Benchmarks (NPB). You can also contribute with this project, writing issues and pull requests.

The conventions we used in our porting can be found here

===================================================================
  NAS Parallel Benchmarks in C++ using OpenMP, FastFlow and Intel TBB

    This project was conducted in the Parallel Applications
    Modelling Group (GMAP) at PUCRS - Brazil.

    GMAP Research Group leader:
        Luiz Gustavo Leão Fernandes

    Code contributors: 
        Dalvan Griebler (PUCRS)
        Gabriell Araujo (PUCRS)
        Júnior Löff (PUCRS)

  In case of questions or problems, please send an e-mail to us:	
    [email protected]
    [email protected]			
    [email protected]				

  We would like to thank the following researchers for the 
  fruitful discussions:
      Gabriele Mencagli	(UNIPI)
      Massimo Torquati	(UNIPI)
      Marco Danelutto (UNIPI)
===================================================================

Folders inside the project:

NPB-SER - This directory contains the sequential version.

NPB-OMP - This directory contains the parallel version implemented with OpenMP (based in the original NPB version).

NPB-TBB - This directory contains the parallel version implemented with Threading Building Blocks.

NPB-FF - This directory contains the parallel version implemented with FastFlow.

The Five Kernels and Three Pseudo-applications

Each directory is independent and contains its own implemented version of the kernels and pseudo-applications:

Kernels

EP - Embarrassingly Parallel, floating-point operation capacity
MG - Multi-Grid, non-local memory accesses, short- and long-distance communication
CG - Conjugate Gradient, irregular memory accesses and communication
FT - discrete 3D fast Fourier Transform, intensive long-distance communication
IS - Integer Sort, integer computation and communication

Pseudo-applications

BT - Block Tri-diagonal solver
SP - Scalar Penta-diagonal solver
LU - Lower-Upper Gauss-Seidel solver

Tip: The pseudo-applications' performance is bounded to the sequential partial differential equation (PDE) solver

Software Requirements

Warning: our tests were made with GCC-9 and ICC-19

How to Compile

Enter the directory from the version desired and execute:

$ make _BENCHMARK CLASS=_WORKLOAD

_BENCHMARKs are:

EP, CG, MG, IS, FT, BT, SP and LU 

_WORKLOADs are:

Class S: small for quick test purposes
Class W: workstation size (a 90's workstation; now likely too small)	
Classes A, B, C: standard test problems; ~4X size increase going from one class to the next	
Classes D, E, F: large test problems; ~16X size increase from each of the previous Classes  

Command example:

$ make ep CLASS=A

How to Execute

Binaries are generated inside the bin folder

Command example:

$ ./bin/ep.A

Compiler and Parallel Configurations

Each folder contains a default compiler configuration that can be modified in the config/make.def file. You must use this file if you want to modify the target compiler, flags or links that will be used to compile the applications.

Parallel Execution

Using and configuring the used parallel programming frameworks

The repository already has an additional directory libs with the FastFlow and Intel TBB libraries.

For TBB you need to compile the library and load the environment variables, therefore, enter libs/tbb-2020.1 and execute the following command:

$ make

This command will generate a folder inside libs/tbb-2020.1/build. Finally, you can load TBB vars within the script tbbvars.sh, for example, executing the following command in your terminal:

$ source libs/tbb-2020.1/build/linux_intel64_gcc_cc7.5.0_libc2.27_kernel4.15.0_release/tbbvars.sh

Setting the degree of parallelism (NUM_THREADS)

The degree of parallelism can be set using the *RUNTIME*_NUM_THREADS environment variable.

Command example:

$ export OMP_NUM_THREADS=32 or TBB_NUM_THREADS and FF_NUM_THREADS