Skip to content

DrewTChrist/atwinc1500-rs

Repository files navigation

atwinc1500-rs

Description

This is a driver for the atwinc1500 network controller written in pure Rust. The primary targets for this driver are boards like the Adafruit Feather M0 Wifi or the Adafruit Atwinc1500 Breakout. The roadmap below describes what is currently working.

Table of Contents

  1. Roadmap
  2. Installation
  3. Usage
  4. Documentation
  5. License
  6. Contribution

Roadmap

This roadmap is subject to change.

  • Info/Hardware
    • Gpio control
    • Read mac address
    • Read firmware version
  • Wifi
    • Scan
    • Connect
      • Older connection format
      • Newer connection format
      • Open network
      • WEP (WEP is deprecated in later atwinc firmware versions)
      • Wpa2
      • Wpa2 Enterprise
    • Disconnect from network
    • Read RSSI
    • AP Mode
  • TcpFullStack
    • bind
    • listen
    • accept
  • TcpClientStack
    • socket
    • connect
    • is_connected
    • send
    • receive
    • close
  • Crypto
  • SSL
  • OTA
  • ATE Mode
  • UART

Installation

Add this crate to your Cargo.toml:

atwinc1500 = "0.1.0"

Usage

Examples can be found here.

License

Licensed under either of

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

About

A Rust driver for the Atwinc1500

Topics

Resources

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT

Stars

Watchers

Forks

Packages

No packages published

Languages