Skip to content

Carglglz/jupyter_upydevice_kernel

Repository files navigation

Jupyter MicroPython Upydevice Kernel

Jupyter kernel to interact with a MicroPython board over its REPL interface.

Typically used with MicroPython boards over the USB / Serial interface, or through the WebREPL.

MicroPython

Tested on MicroPython v1.11 - v1.16

Boards

Tested on:
  • PYBOARD V1.1/Lite
  • ESP32
  • ESP8266
  • CIRCUITPLAYGROUND EXPRESS

IDE/PLATFORMS

Background

This Jupyter MicroPython Kernel is heavily based on the amazing work done on https://github.com/goatchurchprime/jupyter_micropython_kernel and https://github.com/andrewleech/jupyter_micropython_remote

Their device connection library has been replaced by upydevice latest classes SerialDevice, WebSocketDevice and AsyncBleDevice that allows Serial, WiFi (websocket-WebREPL) and Bluetooth Low Energy (BleREPL) connections. The kernel has also been reworked to support autocompletions on tab which works for MicroPython, iPython and %cell magic commands. Some %cell magic commands were dropped and some new were added e.g: %is_reachable %meminfo %whoami %gccollect %sync %logdata %devplot %connect %rssi

Installation

Ensure you have a new enough MicroPython installed on your board (see above).

You also need python 3.6 or above, ensuring it’s available from your current command line. Optionally (recommended) use your favourite pipenv / virtualenv to set up a clean environment to run jupyter from.

Then install this module:

pip install jupyter-micropython-upydevice

Install the kernel into jupyter itself using the shell command:

python -m mpy_kernel_upydevice.install

This registers the kernel with Jupyter so it can be selected for use in notebooks

Running

Now run Jupyter notebooks or Jupyter lab:

For Jupyter lab do:

jupyter lab

In the launcher click on the MicroPython upydevice button to create a new notebook

Serial device

To connect through serial/USB: %serialconnect [SERIAL PORT] [BAUDRATE] or if a device already configured (see upydev) in the global group 'UPY_G', %serialconnect @[DEVICE] which has autocompletion on tab.

This command has autocompletion on tab, so hit tab and select a port from the list

Baudrate default is 115200

Use -kbi option to interrupt any running loop

eg:

%serialconnect /dev/tty.usbmodem3370377430372 115200

or

%serialconnect @pybV1.1
** Serial connected **

SerialDevice @ /dev/tty.usbmodem3370377430372, Type: pyboard, Class: SerialDevice
Firmware: MicroPython v1.17-217-gde7e3cd79-dirty on 2021-11-30; PYBv1.1 with STM32F405RG
Pyboard Virtual Comm Port in FS Mode, Manufacturer: MicroPython
(MAC: 3c:00:3d:00:02:47:37:30:38:37:33:33)

MicroPython v1.17-217-gde7e3cd79-dirty on 2021-11-30; PYBv1.1 with STM32F405RG
Type "help()" for more information.

Wireless Device: WiFi

To connect through WebREPL: %websocketconnect [IP] --password "[PASSWORD]" or if a device already configured (see upydev) in the global group 'UPY_G', %websocketconnect @[DEVICE] which has autocompletion on tab.

Use -kbi option to interrupt any running loop

eg:

%websocketconnect 192.168.1.42 --password "mypass"

or

%websocketconnect @esp_room1
** WebREPL connected **

WebSocketDevice @ ws://192.168.1.66:8266, Type: esp32, Class: WebSocketDevice
Firmware: MicroPython v1.17 on 2021-09-02; ESP32 module with ESP32
(MAC: 7c:9e:bd:3d:9d:f4, Host Name: gkesp32, RSSI: -58 dBm)

MicroPython v1.17 on 2021-09-02; ESP32 module with ESP32
Type "help()" for more information.

Wireless Device: BLE

To connect through BLEREPL: %bleconnect [ADDRESS] " or if a device already configured (see upydev) in the global group 'UPY_G', %bleconnect @[DEVICE] which has autocompletion on tab.

eg:

%bleconnect 9998175F-9A91-4CA2-B5EA-482AFC3453B9

or

%bleconnect @bledev
[Service] 6e400001-b5a3-f393-e0a9-e50e24dcca9e: Nordic UART Service
[Characteristic] 6e400003-b5a3-f393-e0a9-e50e24dcca9e: (notify) | Name: Nordic UART TX
  [Descriptor] [00002902-0000-1000-8000-00805f9b34fb]: Client Characteristic Configuration (Handle: 22)
[Characteristic] 6e400002-b5a3-f393-e0a9-e50e24dcca9e: (write) | Name: Nordic UART RX

** BleREPL connected **

BleDevice @ 9998175F-9A91-4CA2-B5EA-482AFC3453B9, Type: esp32 , Class: BleDevice
Firmware: MicroPython v1.16 on 2021-06-24; ESP32 module with ESP32
(MAC: 30:ae:a4:23:35:64, Local Name: esp32-34, RSSI: -50 dBm)

MicroPython v1.16 on 2021-06-24; ESP32 module with ESP32
Type "help()" for more information.

The %connect magic command allows any type of device:

%connect @esp_room1
%connect @pybV1.1
%connect @bledev

You should now be able to execute MicroPython commands by running the cells.

There is a upydevice_kernel_demo.ipynb file in the directory you could look at with some of the features shown.

If a cell is taking too long, or if you want to stop an ongoing loop To interrupt / ^C use “Interrupt the kernel” button and this will raise a KeyboardInterrupt in the device.

Alternatively hit Escape and then ‘i’ twice.

To do a soft reset (it will reconnect automatically) type:

 %rebootdevice

Note: Restarting the kernel does not actually reboot the device.
Also, pressing the reset button will mess things up (at least for WebREPL, BleREPL
and for serial this is probably true as well).

%Cell magic Commands

Cell magic commands have autocompletion on tab, so hit tab and see what Commands are available, or to see more information about each command do:

%lsmagic
%disconnect
  disconnects device

%lsmagic
    list magic commands

%rebootdevice
    reboots device

%is_reachable
    Test if device is reachable (must be connected first)

%connect
    connects to a device based on addres or configuration

%serialconnect [-kbi] [portname] [baudrate]
    connects to a device over USB, default baudrate is 115200

%websocketconnect [--password PASSWORD] [-kbi] [-ssl] [websocketurl]
    connects to the WebREPL over wifi (WebREPL daemon must be running)
    websocketurl defaults to 192.168.4.1 (uri -> ws://192.168.4.1:8266)

%bleconnect [bleaddress]
    connects to the BleREPL over Bluetooth Low Energy(BleREPL must be running)

%meminfo
    Shows RAM size/used/free/use% info

%whoami
    Shows Device name, port, id, and system info

%rssi
    Shows Device RSSI if wireless

%gccollect
    To use the garbage collector and free some RAM if possible

%local
    To run the cell contents in local iPython

%sync
    To sync a variable/output data structure of the device into iPython
    if no var name provided it stores the output into _

%logdata [-fs FS] [-tm TM] [-u U [U ...]] [-s] v [v ...]
    To log output data of the device into iPython,
    data is stored in 'devlog'

   positional arguments:
      v             Name of variables
   optional arguments:
      -fs FS        Sampling frequency in Hz
      -tm TM        Sampling timeout in ms
      -u U [U ...]  Unit of variables
      -s            Silent mode

%devplot
    To plot devlog data

The communications interface to the MicroPython device is based on upydevice <https://github.com/Carglglz/upydevice>

This is also the core library of upydev . The SERIAL SHELL-REPL can be used simultaneously with the upydevice Kernel since the serial connection is non-blocking.

%local

Individual cells can also be run on the local iPython instead of the MicroPython kernel by starting a cell with %local

This can be useful to work directly with local files, use ipywidgets, etc. Commands here will be run by the standard ipython kernel.

In %local cells, a special global function remote() is also available which will pass a single string argument to the MicroPython board to be run, returning any stdout from the command. Eg:

micropython cell

from machine import Pin
import neopixel
pixels = neopixel.NeoPixel(Pin(4, Pin.OUT), 1)

def set_colour(r, g, b):
    pixels[0] = (r, g, b)
    pixels.write()

set_colour(0xff, 0xff, 0xff)

local cell

%local
import colorsys
from ipywidgets import interact, Layout, FloatSlider

def set_hue(hue):
    r, g, b = (int(p*255) for p in colorsys.hsv_to_rgb(hue, 1.0, 1.0))
    remote(f"set_colour({r}, {g}, {b})")

slider = FloatSlider(min=0,max=1.0,step=0.01, layout=Layout(width='80%', height='80px'))
interact(set_hue, hue=slider)

%sync

Any variable/output of the device can be stored in local iPython easily. If a var name is not provided the output will be stored locally in _ , e.g. :

%sync
[1,2,3,5]
[1, 2, 3, 5]
%local
_
[1, 2, 3, 5]

If device output is assigned to a variable it will be stored locally with the same name e.g. :

%sync
my_data = {'key1':[1,2,3], 'key2':[4,5,6]}
%local
my_data
{'key2': [4, 5, 6], 'key1': [1, 2, 3]}

This works for any type of output (bytes/bytearrays/arrays/ints/floats/strings/lists/dicts)

%logdata

This allows to log any data from device stdout as long as the data is in tuple or list format. The data will be stored in local iPython in 'devlog'. (Serial and WebSocketDevices only)

positional arguments:
v Name of variables
optional arguments:
  • -fs FS Sampling frequency in Hz
  • -tm TM Sampling timeout in ms
  • -u U [U ...] Unit of variables
  • -s Silent mode

e.g. : Logging accelerometer data from an IMU sensor.

micropython cell

import time
from machine import I2C, Pin
from lsm9ds1 import LSM9DS1
i2c = I2C(scl=Pin(22), sda=Pin(23))
imu = LSM9DS1(i2c)

def stream_accel(n, tm):
  for i in range(n):
      print(imu.read_accel())
      time.sleep_ms(tm)

%logdata cell

%logdata 'x' 'y' 'z' -tm 10 -u 'g(9.8m/s^2)'
stream_accel(400, 10)
vars:['x', 'y', 'z'], fs:None Hz, tm:10 ms, u: ['g(9.8m/s^2)'], silent: False
------------------------------
(-0.6851807, 0.6947632, 0.3374634)
(-0.6889038, 0.6830444, 0.3411255)
(-0.7027588, 0.6877441, 0.3455811)
(-0.7280884, 0.7080688, 0.3401489)
....
(-0.734375, 0.7600098, -0.0004272461)
(-0.7210693, 0.7717896, -0.05194092)
(-0.7344971, 0.7575684, 0.006652832)

Now data is stored in devlog

%local
devlog
{'x': [-0.6851807, ..., -0.7344971], 'y': [0.6947632, ..., 0.7575684],
 'z': [-0.7280884, ..., 0.006652832], 'vars': ['x', 'y', 'z']
 'fs': 100, 'ts': [0.0, ... , 4.0], 'u': ['g(9.8m/s^2)']}

%devplot

This allows to plot devlog data, just do:

%devplot

acc-plot.png

Now to save the plot do:

%local
fig.savefig('acc-plot.png')
%local
%ls
LICENSE*                    mpy_kernel_upydevice/
README.rst*                 setup.py
acc-plot.png                upydevie_kernel_demo.ipynb