RZBoard Flash Utility

This is a platform agnostic utility used to flash the RZBoard. This utility is used to flash the bootloaders to eMMC or QSPI and system image to eMMC.

Note

Get started with pre-compiled binaries: check out RZBoard's latest releases

Install Python

This utility is written in python3 with (minimal) dependencies managed using pip.

Ubuntu Installation

On Ubuntu, python3 and pip can be installed by running:

sudo apt install -y python3 python3-pip

Other OS

Mac and Windows can install by using one of the manage package managers for your platform or by downloading an installer from https://www.python.org/downloads/.

Clone & Install Dependencies

git clone https://github.com/Avnet/rzboard_flash_util.git

The script has a couple dependencies that can be installed by running the following:

cd rzboard_flash_util
pip3 install -r requirements.txt

Usage

Tip

Running ./flash_rzboard.py -h will print usage information. A more detailed description of the arguments is detailed below.

Specifying What to Flash

The utility can be used to flash the bootloader, rootfs, or both at the same time:

./flash_rzboard.py --bootloader # Flash bootloader to eMMC (includes flash image writer, BL2 image writer, FIP image)
./flash_rzboard.py --bootloader --qspi # Flash bootloader to QSPI 
./flash_rzboard.py --rootfs     # Flash system image only
./flash_rzboard.py --full       # Flash bootloader and system image

Options

Serial Port

By default, the utility uses /dev/ttyUSB0 as the serial port to communicate with the RZBoard. This can be changed with --serial_port. Additionally the default baud rate of 115200 can be chaged with --serial_port_baud:

./flash_rzboard --serial_port DESIRED_SERIAL_PORT --serial_port_baud DESIRED_BAUD_RATE

Image Locations

By default, the utility looks for the required images in the directory that flash_rzboard.py is located. The required images, along with the override flag and default location and name is listed below:

Image	Flag	Default	Description
Flash Image Writer	--image_writer	<SCRIPT_DIR>/Flash_Writer_SCIF_rzboard.mot	Application loaded in to received bootloader images over serial and write to eMMC
BL2 Image	--image_bl2	<SCRIPT_DIR>/bl2_bp-rzboard.srec	Bootloader
FIP Image	--image_fip	<SCRIPT_DIR>/fip-rzboard.srec	Bootloader, ARM TFA (Trusted Firmware-A) BL31, and u-boot in a combined image
System Image	--image_rootfs	<SCRIPT_DIR>/avnet-core-image-rzboard.wic	Contains the linux kernel, device tree (dtb), and root filesystem (rootfs) in a minimized format.

NOTE: If only flashing the system image, the image writer, bl2, and FIP images are not required/