Add MAX32690EVKIT

Signed-off-by: Sadik Ozer <[email protected]>

projects.yaml

@@ -550,6 +550,10 @@ projects:
  - *module_if
  - *module_hic_max32625
  - records/board/max32650fthr.yaml
+ max32625_max32690evkit_if:
+ - *module_if
+ - *module_hic_max32625
+ - records/board/max32690evkit.yaml
  nrf52820_microbit_bl:
  - *module_bl
  - records/hic_hal/nrf52820.yaml

records/board/max32690evkit.yaml

@@ -0,0 +1,7 @@
+common:
+ sources:
+ board:
+ - source/board/max32690evkit.c
+ family:
+ - source/family/maxim/max32690/target.c
+ - source/family/maxim/target_reset_max32xxx.c

source/board/max32690evkit.c

@@ -0,0 +1,35 @@
+/**
+ * @file max32690evkit.c
+ * @brief board ID for the Analog Devices Inc.'s MAX32690EVKIT
+ *
+ * DAPLink Interface Firmware
+ * Copyright (c) 2023, Analog Devices, Inc.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "target_family.h"
+#include "target_board.h"
+
+const board_info_t g_board_info = {
+ .info_version = kBoardInfoVersion,
+ .board_id = "0426",
+ .family_id = kMaxim_MAX3266X_FamilyID,
+ .flags = kEnablePageErase,
+ .target_cfg = &target_device,
+ .daplink_url_name = "MAX32690HTM",
+ .daplink_target_url = "http://www.analog.com/max32690evkit",
+ .board_vendor = "Maxim",
+ .board_name = "MAX32690 EvKit",
+};

source/family/maxim/max32690/flash_blob.c

@@ -0,0 +1,99 @@
+/**
+ * @file flash_blob.c
+ * @brief Flash algorithm for the MAX32690
+ *
+ * DAPLink Interface Firmware
+ * Copyright (c) 2023 Analog Devices, Inc.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "flash_blob.h"
+
+#define CLOCK_DIV 0x00000078
+#define BURST_SIZE 0x00000080
+
+#define FLC0_BASE 0x40029000
+#define FLASH0_BASE 0x10000000 // 
+#define FLASH0_SIZE 0x00300000 // 3MB
+#define FLASH0_SECTOR KB(16)
+
+#define FLC1_BASE 0x40029400 // second flash controller
+#define FLASH1_BASE 0x10300000 // second block of flash
+#define FLASH1_SIZE 0x00040000 // 256KB
+#define FLASH1_SECTOR KB(8)
+
+
+static const uint32_t maxim_flash_prog_blob[] = {
+ 0xE00ABE00, 
+ 0x444949a6, 0x68826808, 0x0f07f012, 0x68cad10b, 0x69486042, 0x6948b148, 0xf0126882, 0xbf040f07,
+ 0x604168c9, 0x2001d001, 0x20004770, 0x499b4770, 0x68084449, 0xf0226882, 0x60824270, 0xb1206948,
+ 0x68816948, 0x4170f021, 0x20006081, 0xb5104770, 0x444c4c92, 0xf0006820, 0xb928f8f4, 0xb1286960,
+ 0xf0006960, 0xb108f8ee, 0xbd102001, 0xbd102000, 0x4449498a, 0xb132698a, 0x4282698a, 0x688ad803,
+ 0x1a806949, 0x6809e000, 0xf012688a, 0xd1270f07, 0xb13a6a4a, 0x624a2200, 0xb11a6a4a, 0x624a2202,
+ 0xb9ea6a4a, 0xf022688a, 0xf0424270, 0x608a5200, 0xf422688a, 0xf442427f, 0x608a42aa, 0x68886008,
+ 0x0004f040, 0x68886088, 0x0f04f010, 0x6888d1fb, 0x4070f020, 0x6a486088, 0x0002f010, 0x4770bf08,
+ 0x47702001, 0x4c6db430, 0x69a3444c, 0x69a3b133, 0xd8034283, 0x1ac068a3, 0xe0006963, 0xf0126823,
+ 0xbf040f03, 0xc008f8d3, 0x0f07f01c, 0xf8d3d17d, 0xf1bcc024, 0xd0110f00, 0x0c00f04f, 0xc024f8c3,
+ 0xc024f8d3, 0x0f00f1bc, 0xf04fd008, 0xf8c30c02, 0xf8d3c024, 0xf1bcc024, 0xd17f0f00, 0xc008f8d3,
+ 0x4c70f02c, 0x5c00f04c, 0xc008f8c3, 0x6018e011, 0xcb04f852, 0xc030f8c3, 0xc008f8d3, 0x0c01f04c,
+ 0xc008f8c3, 0xc008f8d3, 0x0f01f01c, 0x1d00d1fa, 0x29041f09, 0xf010d302, 0xd1e80f1f, 0xc010f8d4,
+ 0x0f80f1bc, 0x2910d121, 0x6018d31f, 0xcb04f852, 0xc030f8c3, 0xcb04f852, 0xc034f8c3, 0xcb04f852,
+ 0xc038f8c3, 0xcb04f852, 0xc03cf8c3, 0xc008f8d3, 0x0c01f04c, 0xc008f8c3, 0xc008f8d3, 0x0f01f01c,
+ 0x3010d1fa, 0x29103910, 0x2904d2df, 0x6018d313, 0xcb04f852, 0xc030f8c3, 0xc008f8d3, 0x0c01f04c,
+ 0xc008f8c3, 0xc008f8d3, 0x0f01f01c, 0x1d00d1fa, 0x29041f09, 0xb1b9d2eb, 0xf04f6812, 0xf04f34ff,
+ 0xea620cff, 0x402c050c, 0xe017e000, 0x2c0cea4f, 0xd1f61e49, 0x631c6018, 0xf0406898, 0x60980001,
+ 0xf0106898, 0xd1fb0f01, 0xf0206898, 0x60984070, 0xf0106a58, 0xbf040002, 0x4770bc30, 0xbc302001,
+ 0x68814770, 0x0f07f011, 0x6a41d126, 0x2100b139, 0x6a416241, 0x2102b119, 0x6a416241, 0x6881b9e1,
+ 0x4170f021, 0x5100f041, 0x68816081, 0x417ff421, 0x412af441, 0x68816081, 0x0102f041, 0x68816081,
+ 0x0f02f011, 0x6881d1fb, 0x4170f021, 0x6a406081, 0x0002f010, 0x4770bf08, 0x47702001, 0x00000004,
+ 0x00000000, 
+ FLC0_BASE, FLASH0_BASE,FLASH0_SIZE,CLOCK_DIV, BURST_SIZE, FLC1_BASE, FLASH1_BASE,FLASH1_SIZE
+};
+
+/**
+* List of start and size for each size of flash sector - even indexes are start, odd are size
+* The size will apply to all sectors between the listed address and the next address
+* in the list.
+* The last pair in the list will have sectors starting at that address and ending
+* at address flash_start + flash_size.
+*/
+static const sector_info_t sectors_info[] = {
+ {FLASH0_BASE, FLASH0_SECTOR},
+ {FLASH1_BASE, FLASH1_SECTOR},
+};
+
+static const program_target_t flash = {
+ 0x20000005, // Init
+ 0x20000033, // UnInit
+ 0x20000053, // EraseChip
+ 0x20000075, // EraseSector
+ 0x200000e9, // ProgramPage
+ 0x0, // Verify
+
+ // BKPT : start of blob + 1
+ // RSB : blob start + header + rw data offset
+ // RSP : stack pointer
+ {
+ 0x20000001,
+ 0x200002a4,
+ 0x20000500
+ },
+
+ 0x20000000 + 0x00000A00, // mem buffer location
+ 0x20000000, // location to write prog_blob in target RAM
+ sizeof(maxim_flash_prog_blob), // prog_blob size
+ maxim_flash_prog_blob, // address of prog_blob
+ 0x00004000 // ram_to_flash_bytes_to_be_written
+};

source/family/maxim/max32690/target.c

@@ -0,0 +1,38 @@
+/**
+ * @file target.c
+ * @brief Target information for the MAX32690
+ *
+ * DAPLink Interface Firmware
+ * Copyright (c) 2023 Analog Devices, Inc.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "target_config.h"
+
+#include "flash_blob.c"
+
+/* MAX32690 3MiB+256KB Flash, 1MiB RAM */
+target_cfg_t target_device = {
+ .sectors_info = sectors_info,
+ .sector_info_length = (sizeof(sectors_info))/(sizeof(sector_info_t)),
+ .flash_regions[0].start = 0x10000000,
+ .flash_regions[0].end = 0x10000000 + MB(3) + KB(256),
+ .flash_regions[0].flags = kRegionIsDefault,
+ .flash_regions[0].flash_algo = (program_target_t *) &flash,
+ .ram_regions[0].start = 0x20000000,
+ .ram_regions[0].end = 0x20000000 + MB(1),
+ .target_vendor = "Maxim",
+ .target_part_number = "MAX32690",
+};

test/info.py

@@ -101,6 +101,7 @@
  ('max32625_max78000fthr_if', False, 0x0000, "bin" ),
  ('max32625_max32670evkit_if', False, 0x0000, "bin" ),
  ('max32625_max32650fthr_if', False, 0x0000, "bin" ),
+ ('max32625_max32690evkit_if', False, 0x0000, "bin" ),
  ('kl26z_if', False, 0x0000, "bin" ),
  ('k20dx_if', False, 0x0000, "bin" ),
  ('k26f_if', False, 0x0000, "bin" ),
@@ -182,6 +183,7 @@ def VENDOR_TO_FAMILY(x, y) : return (VENDOR_ID[x] <<8) | y
  ( 0x0423, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max78000fthr_if', 'max32625_bl', 'MAX78000' ),
  ( 0x0424, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32670evkit_if', 'max32625_bl', 'MAX32670' ),
  ( 0x0425, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32650fthr_if', 'max32625_bl', 'MAX32650' ),
+ ( 0x0426, VENDOR_TO_FAMILY('Stub', 1), 'max32625_max32690evkit_if', 'max32625_bl', 'MAX32690' ),
  ( 0x0700, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f103rb_if', 'stm32f103xb_bl', 'ST-Nucleo-F103RB' ),
  ( 0x0720, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f401re_if', 'stm32f103xb_bl', 'ST-Nucleo-F401RE' ),
  ( 0x0720, VENDOR_TO_FAMILY('Stub', 1), 'stm32f103xb_stm32f072rb_if', 'stm32f103xb_bl', 'ST-Nucleo-F072RB' ),
@@ -315,6 +317,7 @@ def VENDOR_TO_FAMILY(x, y) : return (VENDOR_ID[x] <<8) | y
  0x0423, # MAX78000FTHR
  0x0424, # MAX32670EVKIT
  0x0425, # MAX32650FTHR
+ 0x0426, # MAX32690EVKIT
  0x0460, # WISE-1570
  0x1101, # Nordic-nRF52-DK
  0x1102, # Nordic-nRF52840-DK