Zwavejsui-ui container not started automatically (RPI)

[hvoorend]

My MQTT-, zwavejsui-ui-, Domoticz-package runs perfectly fine and I’m happy with it. The only thing now is: my Mosquitto container is automatically started by docker-compose at RPI startup (after reboot or power on) but my zwavejs-ui container is not. I have to start it manually from /opt/zwavejs-ui/ with docker-compose up -d every time after power off/on or reboot. How can I make the zwavejsui-ui container auto start?
This is my docker-compose.yml:
pi@raspberrypi:/opt/zwavejs-ui $ cat docker-compose.yml version: "3.7" services: zwave-js-ui: container_name: zwave-js-ui image: zwavejs/zwave-js-ui:latest restart: unless-stopped tty: true stop_signal: SIGINT environment: - SESSION_SECRET=mySecretSession - TZ=Europe/Amsterdam devices: - '/dev/serial/by-id/usb-0658_0200-if00:/dev/zwave' volumes: - ./store:/usr/src/app/store ports: - "8091:8091" # port for web interface - "3000:3000" # port for Z-Wave JS websocket server

This is my Mosquitto docker-compose.yaml
`pi@raspberrypi:/opt/mosquitto $ cat docker-compose.yaml
services:
mosquitto:
restart: unless-stopped
build:
context: .
volumes:
- type: bind
source: ./config/
target: /mosquitto/config/
- type: bind
source: ./log/
target: /mosquitto/log/
- type: volume
source: data
target: /mosquitto/data/
ports:
- target: 1883
published: 1883
protocol: tcp
mode: host
- target: 9001
published: 9001
protocol: tcp
mode: host

volumes:
data:
name: "mqtt-broker-data" `

[hvoorend]

Apologies that I lost the formatting in the initial post. Here a retry:
My MQTT-, zwavejsui-ui-, Domoticz-package runs perfectly fine and I’m happy with it. The only thing now is: my Mosquitto container is automatically started by docker-compose at RPI startup (after reboot or power on) but my zwavejs-ui container is not. I have to start it manually from /opt/zwavejs-ui/ with docker-compose up -d every time after power off/on or reboot. How can I make the zwavejsui-ui container auto start?

This is my docker-compose.yml:

pi@raspberrypi:/opt/zwavejs-ui $ cat docker-compose.yml
version: "3.7"
services:
  zwave-js-ui:
    container_name: zwave-js-ui
    image: zwavejs/zwave-js-ui:latest
    restart: unless-stopped
    tty: true
    stop_signal: SIGINT
    environment:
      - SESSION_SECRET=mySecretSession
      - TZ=Europe/Amsterdam
    devices:
      - '/dev/serial/by-id/usb-0658_0200-if00:/dev/zwave'
    volumes:
      - ./store:/usr/src/app/store
    ports:
      - "8091:8091" # port for web interface
      - "3000:3000" # port for Z-Wave JS websocket server 

This is my Mosquitto docker-compose.yaml:

pi@raspberrypi:/opt/mosquitto $ cat docker-compose.yaml
services:
  mosquitto:
    restart: unless-stopped
    build:
      context: .
    volumes:
      - type: bind
        source: ./config/
        target: /mosquitto/config/
      - type: bind
        source: ./log/
        target: /mosquitto/log/
      - type: volume
        source: data
        target: /mosquitto/data/
    ports:
      - target: 1883
        published: 1883
        protocol: tcp
        mode: host
      - target: 9001
        published: 9001
        protocol: tcp
        mode: host

volumes:
  data:
    name: "mqtt-broker-data" 

[robertsLando]

@hvoorend I don't see any issue on your docker-compose file, did you try to check if on boot there is any error that prevents the container to start for some reason? Because AFAIK starting it with docker-compose up -d is enough (I always used that command and it always worked for me to start the container on boot). The alternative could be to put a script that runs the compose up command on boot like for example in rc.local but that's not ideal

[hvoorend]

Thanks Robert, good to know that docker-compose up -d should be enough. I will go through my logs and see if I can find any issues.

[robertsLando]

Ok let me know 🙏🏼

[hvoorend]

Will sure do. Pls. allow me to find a bit of time to do my investigation.

[hvoorend]

I've found this post that helped me out: [https://stackoverflow.com/questions/64644587/containers-not-restarted-after-update-with-restart-always-in-docker-compose-yml].
I checked the Restart Policy for my container called "zwave-js-ui". It told me: "Name": "unless-stopped". This is almost simular to restart always, BUT... if one stops the container (manually or otherwise), docker will no longer automatically start it (docker says: ok, you want to stop it, probably you know better then I do (or will have your good reasons), so I will keep my hands off until I'm instructed differently").
So I must have stopped it manually some time in my Domoticz upgrade process to MQTT/zwave-js-ui. Can't recall.

``` root@raspberrypi:~# docker inspect zwave-js-ui | grep -i restart -A 5
            "Restarting": false,
            "OOMKilled": false,
            "Dead": false,
            "Pid": 18334,
            "ExitCode": 0,
            "Error": "",
--
        "RestartCount": 0,
        "Driver": "overlay2",
        "Platform": "linux",
        "MountLabel": "",
        "ProcessLabel": "",
        "AppArmorProfile": "",
--
            "RestartPolicy": {
                "Name": "unless-stopped",
                "MaximumRetryCount": 0
            },
            "AutoRemove": false,
            "VolumeDriver": "",

So I've updated the Restart Policy for my container with: docker update zwave-js-ui --restart always
Redisplaying the Restart Policy now showed: "Name": "always"  (see below).
Rebooted and all came up automatically. Same for power off/on. Issue solved. 
Good learning experience. Hope this explanation will help someone if he/she runs into this issue. 

/root@raspberrypi:~# docker inspect zwave-js-ui | grep -i restart -A 5
            "Restarting": false,
            "OOMKilled": false,
            "Dead": false,
            "Pid": 18334,
            "ExitCode": 0,
            "Error": "",
--
        "RestartCount": 0,
        "Driver": "overlay2",
        "Platform": "linux",
        "MountLabel": "",
        "ProcessLabel": "",
        "AppArmorProfile": "",
--
            "RestartPolicy": {
                "Name": "always",
                "MaximumRetryCount": 0
            },
            "AutoRemove": false,
            "VolumeDriver": "",

[hvoorend]

The "unless-stopped" is also in both YML files for the MQTT and the zwave-js-ui container. So I could change this to "always". But with above knowledge it can be more handy to keep it on unless-stopped in the yml's for now.

[robertsLando]

So I must have stopped it manually some time in my Domoticz upgrade process to MQTT/zwave-js-ui. Can't recall.

It could be. So I can close this, right? Feel free to reopen in case

[hvoorend]

Yes it can be closed. Thanks