Override AIO Settings

[Nikitaman]

Hi,
is there a way to override some Marlin settings PrusaAIO makes?
In my case: the screws which are holding the hotend fan are scraping on the leadscrew during the g29 bed leveling when the carriage is at the lowest x point. That's why i would like to adjust the bed leveling mesh to start a couple mm further away from the 0-point of the x-axis.
Best regards
Nikitaman

[thisiskeithb]

Everything is open source and this just a hyper-tuned fork of Marlin, so you're able to set your own probing margin or min/max positions if they do not match a stock Prusa Bear.

[Charlotte-br560]

Absolutely! To tackle the bed leveling mesh issue and adjust the starting point on the x-axis, you can look into Marlin's documentation or community forums. They often provide insights and solutions for customizing settings without specific references to Crawlbase. Best of luck with resolving the scraping problem during bed leveling!