Skip to content

Latest commit

 

History

History
121 lines (76 loc) · 2.84 KB

README.md

File metadata and controls

121 lines (76 loc) · 2.84 KB

Power Functions IR Sender

Build Status

Control your LEGO® Power Functions motors using your micro:bit or Calliope-Mini, an infrared LED and MakeCode. This extension turns your device into a remote control for your Power Functions devices.

A project using this extension is documented on hackster.io

Installation

Open MakeCode and select '+ Extensions' in the 'Advanced' menu. You need to enter our project URL https://github.com/philipphenkel/pxt-powerfunctions in the search field, hit return and then select the powerfunctions extension.

Documentation

powerfunctions.connectIrLed

Configures the infrared LED pin. A 940 nm emitting diode is required.

powerfunctions.connectIrLed(AnalogPin.P0)

Parameters

  • pin - analog pin with an attached IR-emitting LED

powerfunctions.setSpeed

Sets the speed of a motor.

powerfunctions.setSpeed(PowerFunctionsMotor.Red1, 3)

Parameters

  • motor - the motor
  • speed - the speed of the motor from -7 to 7.

powerfunctions.brake

Brakes then float. The motor's power is quickly reversed and thus the motor will stop abruptly.

powerfunctions.brake(PowerFunctionsMotor.Red1)

Parameters

  • motor - the motor

powerfunctions.float

Floats a motor to stop. The motor's power is switched off and thus the motor will roll to a stop.

powerfunctions.float(PowerFunctionsMotor.Red1)

Parameters

  • motor - the motor

powerfunctions.setMotorDirection

Configures a motor direction.

powerfunctions.setMotorDirection(PowerFunctionsMotor.Red1, PowerFunctionsDirection.Right)

Parameters

  • motor - the motor
  • direction - the direction of the motor

MakeCode Example

basic.showIcon(IconNames.Heart);
powerfunctions.connectIrLed(AnalogPin.P1);

powerfunctions.setMotorDirection(
  PowerFunctionsMotor.Blue1,
  PowerFunctionsDirection.Backward
);

input.onButtonPressed(Button.A, () => {
  powerfunctions.setSpeed(PowerFunctionsMotor.Blue1, 3);
});

input.onButtonPressed(Button.B, () => {
  powerfunctions.float(PowerFunctionsMotor.Blue1);
});

basic.forever(() => {
  led.plotBarGraph(input.lightLevel(), 255);

  if (input.lightLevel() > 200) {
    powerfunctions.float(PowerFunctionsMotor.Blue1);
    basic.pause(5000);
    powerfunctions.setSpeed(PowerFunctionsMotor.Blue1, 2);
    basic.pause(3000);
  }
});

Disclaimer

LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this project.

License

Copyright (C) 2017-2020 Philipp Henkel

Licensed under the MIT License (MIT). See LICENSE file for more details.

Supported targets

  • for PXT/microbit