Tapo H200 Smart Hub

[pektommy]

Anyone managed to connect the H200 hub? I can't add the device, it won't find it when I try to add it by device ip.
Error message "Failed to connect"

[hiltonhowie]

I have the same issue, checking the logs its trying to connect on port 80. I tried adding the ip address plus 192.168.60.20:443 but it made no difference

[zee36]

Hi All, same issue, can't connect to the H200 hub.

[Ossiez]

I'm also having the same issue, Any guidance on how to add it would be greatly appreciated.
Also, will it show any sensors that are connected to the hub as entities?

[raymen1]

Same here, trying to connect but have not been able to.

[ajock]

Hi, Is there any progress on the integration, waiting to connect h200 with switches and motion sensors to the home assistant

[petretiandrea]

H200 require a new protocol implementation I'm working on it

[f]

Hey @petretiandrea, is there a progress on it? Do you have any date to release H200 new protocol support? My setup desperately needs this implementation :)

[metafysikz]

I'm also patiently awaiting this feature :) For the meantime I'm using the H200 via SmartThings.

[ekareklam]

Hello. Is there any progress?

[Thomas-TB]

Hello, please do you already know a release date for an update that would connect H200?

[Mocusolvan]

I would also greatly appreciate the support for Tapo H200 Hub. Thanks

[ekareklam]

Hello, no sir. 13 Haz 2024 Per, saat 09:25 tarihinde Thomas-TB ***@***.***> şunu yazdı:

…

Hello, please do you already know a release date for an update that would connect H200? — Reply to this email directly, view it on GitHub <#580 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2QNFOYMOMN7NOMPXBWGJ4TZHE3N7AVCNFSM6AAAAAA6EIGJ46VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TONJZGQ2TC> . You are receiving this because you commented.Message ID: <petretiandrea/home-assistant-tapo-p100/repo-discussions/580/comments/9759451 @github.com>

[Thomas-TB]

It is a pity

[ekareklam]

I will try. 13 Haz 2024 Per, saat 11:26 tarihinde Thomas-TB ***@***.***> şunu yazdı:

…

It is a pity — Reply to this email directly, view it on GitHub <#580 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2QNFO5VPCEZ5KM34E2SJB3ZHFJR7AVCNFSM6AAAAAA6EIGJ46VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TONRQGYYTK> . You are receiving this because you commented.Message ID: <petretiandrea/home-assistant-tapo-p100/repo-discussions/580/comments/9760615 @github.com>

[Thomas-TB]

that's good news, thank you

[ekareklam]

Hi sir, This stays on the screen. 15 Haz 2024 Cmt, saat 12:13 tarihinde ajock ***@***.***> şunu yazdı:

…

Hi, Is there any progress on the integration, waiting to connect h200 with switches and motion sensors to the home assistant — Reply to this email directly, view it on GitHub <#580 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2QNFO3IH7SGXIJ4J3NBX73ZHQASDAVCNFSM6AAAAAA6EIGJ46VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TOOBQG44TM> . You are receiving this because you commented.Message ID: <petretiandrea/home-assistant-tapo-p100/repo-discussions/580/comments/9780796 @github.com>

[FaTonyNZ]

HI, appreciate the work towards H200 integration - wondering how this is going please? I made a rookie mistake and bought up large on Tapo only to realise when HA didn't automatically discover the hub... that it's not supported :-(.

[zee36]

Hi Guys, while this is being developed, you may go an alternative route setting up the H100/H200 hubs for a Matter device (go to the Tapo app and enable it, HASS, Google Home or SmartThings will all pick it up).
In case you have Skyconnect or other Matter sticks (Conbee can make it too e.g.) connected to HASS, then sub-devices will coming through the Matter add-on in HASS. Currently I have entities for the Tapo Thermometer, Tapo motion sensors and Tapo contact sensors through Matter. I can see the Smart Buttons as well - but those are not triggering any actions yet. The flood sensors are not coming though yet. As Matter under HASS is continuously evolving, more and more entities will be available. This is all local - no cloud required. Hope this helps.

[FaTonyNZ]

Thanks Zee36. That's awesome news - thank you! I want to add motion sensors and contact sensors - so looks like these are going to work. Can I use a Sonoff zigbee dongle for this? I haven't done any matter before - so just checking I don't need to order a Conbee. Or is it that the H200 is Zigbee based, which is what a compatible dongle is required, not Matter (which I understand supports WiFi and Zigbee). thanks heaps for your help!