natsomatch (NATS o' Match)

Take Grafana/Vector passed log messages from NATS JetStream, match category and create new subjects.

• Setup HOWTO:

  • Make sure there is a JetStream stream to read from. Creating a stream with a subjects set to the Vector subject will make it collect the published message automatically:

    nats stream add --subjects=default.nats.vector \
      --description='All messages from vector' \
      --storage=file --replicas=3 \
      --retention=limits --discard=old --max-bytes=20GiB --max-msgs=-1 \
      --max-msgs-per-subject=-1 --max-age=-1 --max-msg-size=-1 \
      --dupe-window=60s --no-allow-rollup --no-deny-delete \
      --no-deny-purge --allow-direct bulk_unfiltered
    

  • Create a consumer which we'll use to read from:

    nats consumer add --pull --deliver=all --ack=explicit \
      --replay=instant --filter= --max-deliver=-1 --max-pending=0 \
      --no-headers-only --backoff=none \
      bulk_unfiltered bulk_unfiltered_consumer
    

  • Create a bunch of streams to write to, one for every possible matched subject. Also create a consumer for test purposes while we're at it:

    MATCHES=$(cat lib/match/src/log_matcher.rs |
              grep -FA2 'Ok(Match' |
              sed -e '/subject: /!d;s/.*format!("bulk[.]//;s/[.].*//' |
              sort)
    
    for match in $MATCHES; do
    
      nats stream add --subjects="bulk.$tp.>" --description="Bulk $match" \
        --storage=file --replicas=3 --retention=limits --discard=old \
        --max-bytes=2GiB --max-msgs=-1 --max-msgs-per-subject=-1 \
        --max-age=-1 --max-msg-size=-1 --dupe-window=60s --no-allow-rollup \
        --no-deny-delete --no-deny-purge --allow-direct "bulk_match_${match}"
    
      nats consumer add --pull --deliver=all --ack=explicit \
        --replay=instant --filter= --max-deliver=-1 --max-pending=0 \
        --no-headers-only --backoff=none \
        "bulk_match_${match}" "bulk_match_${match}_consumer"
    
    done
    

• Next, we'll need a couple of these running. Could be more or less depending on how fast consumption rates are. In doc/ there's a Kubernetes setup.

• Configuration can be seen below. If you're using Kubernetes, configure it in the ConfigMap.

• The /healthz health check and stats reporting is listening on port 3000. The Kubernetes container uses this to check liveness.

Configuration/setup

Configuration for the Rust version:

[input]
# Input source
nats.server = 'nats://10.20.30.40:4222'
# Server certificate validation (tls.server_name is not working)
tls.server_name = 'nats.local'
tls.ca_file = './nats_ca.crt'
# Client certificate
tls.cert_file = './nats_client.crt'
tls.key_file = './nats_client.key'
# Select manually made consumer from stream
nats.stream = 'bulk_unfiltered'
nats.consumer = 'bulk_unfiltered_consumer'

[sink]
# Output target
nats.server = 'nats://nats.example.com:4222'
nats.auth = { username = 'derek', password = 's3cr3t!' }
# Server certificate validation (tls.server_name is not working)
tls.ca_file = '/etc/ssl/certs/ca-certificates.crt'
# Client certificate
#tls.cert_file = './nats_client.crt'
#tls.key_file = './nats_client.key'
# No need to set jetstream name or subjects. The subject generation is
# hardcoded for now, based on the message.

TODO

☐ Clear (greppable) log message on startup. Clear log message on shutdown.

☐ Hardcoded attributes are now in lib/json/src/payload_parser.rs. Maybe make them configurable.

☐ Hardcoded matching rules are now in lib/match/src/log_matcher.rs. Maybe make them configurable.

☐ See if we can add filters to remove useless messages. We'll want to check some live data here.

☐ Add configurable bind address for /healthz server. Use a ping/pong test on input/sink too?

☐ See if we want to rely on ghcr.io/rust-cross/rust-musl-cross ( https://github.com/rust-cross/rust-musl-cross ) or want to build something from the official images.

☐ See if we want to use cargo-chef for docker layer caching (speeding up release builds).

☐ Stats improvements:

• Count average message length.
• Report stats on output subscriptions (streams) so we can reorder filters for more speed.

☐ Monitoring improvements:

• Right now we have no easy detection of streams that are not handled quickly enough. Maybe check bulk_unfiltered_consumer for "unprocessed" counts.

☐ Check and fix behaviour on NATS/JetStream disconnect/error. Consider auto-creating streams. (Where are the settings?)

Binary version and SBOM

The git describe version is stored and shown on bad arguments:

$ ./target/release/natsomatch -v
natsomatch v0.1.0
Usage: ./target/release/natsomatch -c <config-file>

The built binary (if built using cargo auditable build) includes a Software Bill of Materials (SBOM):

$ objcopy --dump-section .dep-v0=/dev/stdout target/release/natsomatch |
    python3 -c 'import zlib,sys;print(zlib.decompress(sys.stdin.buffer.read()).decode("utf-8"))' |
    jq .
{
  "packages": [
    {
      "name": "aho-corasick",
      "version": "1.1.2",
      "source": "crates.io",
      "dependencies": [
        45
      ]
    },
    {
      "name": "async-nats",
      "version": "0.33.0",
      "source": "crates.io",
      "dependencies": [
        3,
...

Rust idioms

• String vs. Box<str>: don't use Box<str> to make the string immutable or try to save a uint. Only use it if you have many many strings. (Similarly: see Box<[T]> vs. Vec<T>.)
• into/to_string/to_owned: to_string is to get a human representation of something; to_owned is for converting a &String (or maybe a &str) to a copy/clone; into is for conversion (String to PathBuf, &str to String).