modbus_sungrow.yaml

# Home Assistant Sungrow inverter integration
# https://github.com/mkaiser/Sungrow-SHx-Inverter-Modbus-Home-Assistant
# by Martin Kaiser
# last update: 2024-04-05
#
# Note: This YAML file will only work with Home Assistant >= 2023.10

modbus:
  - name: SungrowSHx
    type: tcp
    host: !secret sungrow_modbus_host_ip
    port: !secret sungrow_modbus_port
    sensors:
      - name: Sungrow device type code
        unique_id: sg_dev_code
        device_address: !secret sungrow_modbus_slave
        address: 4999 # reg 5000
        input_type: input
        data_type: uint16
        scan_interval: 600

      - name: Daily PV generation & battery discharge
        unique_id: sg_daily_pv_gen_battery_discharge
        device_address: !secret sungrow_modbus_slave
        address: 5002 # reg 5003
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total PV generation & battery discharge
        unique_id: sg_total_pv_gen_battery_discharge
        device_address: !secret sungrow_modbus_slave
        address: 5003 # reg 5004
        input_type: input
        data_type: uint32
        swap: word
        unit_of_measurement: kWh
        precision: 1
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Inverter temperature
        unique_id: sg_inverter_temperature
        device_address: !secret sungrow_modbus_slave
        address: 5007 # reg 5008
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: °C
        device_class: Temperature
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: MPPT1 voltage
        unique_id: sg_mppt1_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5010 # reg 5011
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: MPPT1 current
        unique_id: sg_mppt1_current
        device_address: !secret sungrow_modbus_slave
        address: 5011 # reg 5012
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: A
        device_class: Current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: MPPT2 voltage
        unique_id: sg_mppt2_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5012 # reg 5013
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: MPPT2 current
        unique_id: sg_mppt2_current
        device_address: !secret sungrow_modbus_slave
        address: 5013 # reg 5014
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: A
        device_class: Current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Total DC power
        unique_id: sg_total_dc_power
        device_address: !secret sungrow_modbus_slave
        address: 5016 # reg 5017
        input_type: input
        data_type: uint32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Phase A voltage
        unique_id: sg_phase_a_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5018 # reg: 5019
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Phase B voltage
        unique_id: sg_phase_b_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5019 # reg: 5020
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Phase C voltage
        unique_id: sg_phase_c_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5020 # reg: 5021
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Grid frequency
        unique_id: sg_grid_frequency
        device_address: !secret sungrow_modbus_slave
        address: 5035 # reg 5036
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: "Hz"
        device_class: frequency
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Reactive power
        unique_id: sg_reactive_power
        device_address: !secret sungrow_modbus_slave
        address: 5032 # reg 5033
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Power factor
        unique_id: sg_power_factor
        device_address: !secret sungrow_modbus_slave
        address: 5034 # reg 5035
        input_type: input
        data_type: int16
        precision: 3
        unit_of_measurement: "%"
        device_class: power_factor
        state_class: measurement
        scale: 0.001
        scan_interval: 10

      #https://www.photovoltaikforum.com/thread/166134-daten-lesen-vom-sungrow-wechselrichtern-modbus/?pageNo=13
      #Meter Active Power: 5601-5602 S32 W (Energiezähler Wirkleistung)
      #Meter Phase A Active Power: 5603-5604 S32 W (Stromzähler Phase A Wirkleistung)
      #Meter Phase B Active Power: 5605-5606 S32 W (Stromzähler Phase B Wirkleistung)
      #Meter Phase C Active Power: 5607-5608 S32 W (Stromzähler Phase C Wirkleistung)
      - name: Meter active power raw
        unique_id: sg_meter_active_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 5600 # reg 5601
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Meter phase A active power raw
        unique_id: sg_meter_phase_a_active_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 5602 # reg 5603
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Meter phase B active power raw
        unique_id: sg_meter_phase_b_active_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 5604 # reg 5605
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Meter phase C active power raw
        unique_id: sg_meter_phase_c_active_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 5606 # reg 5607
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: BDC rated power
        unique_id: sg_bdc_rated_power
        device_address: !secret sungrow_modbus_slave
        address: 5627 # reg 5628
        input_type: input
        data_type: uint16
        unit_of_measurement: "W"
        device_class: power
        state_class: measurement
        scale: 100
        scan_interval: 600

      - name: BMS max. charging current
        unique_id: sg_bms_max_charging_current
        device_address: !secret sungrow_modbus_slave
        address: 5634 # reg 5635
        input_type: input
        data_type: uint16
        precision: 0
        unit_of_measurement: A
        device_class: Current
        state_class: measurement
        scale: 1
        scan_interval: 60

      - name: BMS max. discharging current
        unique_id: sg_bms_max_discharging_current
        device_address: !secret sungrow_modbus_slave
        address: 5635 # reg 5636
        input_type: input
        data_type: uint16
        precision: 0
        unit_of_measurement: A
        device_class: Current
        state_class: measurement
        scale: 1
        scan_interval: 60

      #https://www.photovoltaikforum.com/thread/166134-daten-lesen-vom-sungrow-wechselrichtern-modbus/?pageNo=13
      #Phase A Backup Power: 5723 S16 W (Backup Leistung Phase A)
      #Phase B Backup Power: 5724 S16 W (Backup Leistung Phase B)
      #Phase C Backup Power: 5725 S16 W (Backup Leistung Phase C)
      - name: Total backup power
        device_address: !secret sungrow_modbus_slave
        unique_id: sg_total_backup_power
        address: 5725 # reg 5726
        input_type: input
        data_type: int16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Backup phase A power
        unique_id: sg_backup_phase_a_power
        device_address: !secret sungrow_modbus_slave
        address: 5722 # reg 5723
        input_type: input
        data_type: int16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Backup phase B power
        unique_id: sg_backup_phase_b_power
        device_address: !secret sungrow_modbus_slave
        address: 5723 # reg 5724
        input_type: input
        data_type: int16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Backup phase C power
        unique_id: sg_backup_phase_c_power
        device_address: !secret sungrow_modbus_slave
        address: 5724 # reg 5725
        input_type: input
        data_type: int16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      # Start monthly PV generation
      - name: Monthly PV generation (01 January)
        unique_id: sg_monthly_pv_generation_01_january
        device_address: !secret sungrow_modbus_slave
        address: 6226 # reg 6227
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (02 February)
        unique_id: sg_monthly_pv_generation_02_february
        device_address: !secret sungrow_modbus_slave
        address: 6227 # reg 6228
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (03 March)
        unique_id: sg_monthly_pv_generation_03_march
        device_address: !secret sungrow_modbus_slave
        address: 6228 # reg 6229
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (04 April)
        unique_id: sg_monthly_pv_generation_04_april
        device_address: !secret sungrow_modbus_slave
        address: 6229 # reg 6230
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (05 May)
        unique_id: sg_monthly_pv_generation_05_may
        device_address: !secret sungrow_modbus_slave
        address: 6230 # reg 6231
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (06 June)
        unique_id: sg_monthly_pv_generation_06_june
        device_address: !secret sungrow_modbus_slave
        address: 6231 # reg 6232
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (07 July)
        unique_id: sg_monthly_pv_generation_07_july
        device_address: !secret sungrow_modbus_slave
        address: 6232 # reg 6233
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (08 August)
        unique_id: sg_monthly_pv_generation_08_august
        device_address: !secret sungrow_modbus_slave
        address: 6233 # reg 6234
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (09 September)
        unique_id: sg_monthly_pv_generation_09_september
        device_address: !secret sungrow_modbus_slave
        address: 6234 # reg 6235
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (10 October)
        unique_id: sg_monthly_pv_generation_10_october
        device_address: !secret sungrow_modbus_slave
        address: 6235 # reg 6236
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (11 November)
        unique_id: sg_monthly_pv_generation_11_november
        device_address: !secret sungrow_modbus_slave
        address: 6236 # reg 6237
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (12 December)
        unique_id: sg_monthly_pv_generation_12_december
        device_address: !secret sungrow_modbus_slave
        address: 6237 # reg 6238
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600
      # End monthly PV generation

      # Start yearly pv generation
      - name: Yearly PV generation (2019)
        unique_id: sg_yearly_pv_generation_2019
        device_address: !secret sungrow_modbus_slave
        address: 6257 # reg 6258
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2020)
        unique_id: sg_yearly_pv_generation_2020
        device_address: !secret sungrow_modbus_slave
        address: 6259 # reg 6260
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2021)
        unique_id: sg_yearly_pv_generation_2021
        device_address: !secret sungrow_modbus_slave
        address: 6261 # reg 6262
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2022)
        unique_id: sg_yearly_pv_generation_2022
        device_address: !secret sungrow_modbus_slave
        address: 6263 # reg 6264
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2023)
        unique_id: sg_yearly_pv_generation_2023
        device_address: !secret sungrow_modbus_slave
        address: 6265 # reg 6266
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2024)
        unique_id: sg_yearly_pv_generation_2024
        device_address: !secret sungrow_modbus_slave
        address: 6267 # reg 6268
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2025)
        unique_id: sg_yearly_pv_generation_2025
        device_address: !secret sungrow_modbus_slave
        address: 6269 # reg 6270
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2026)
        unique_id: sg_yearly_pv_generation_2026
        device_address: !secret sungrow_modbus_slave
        address: 6271 # reg 6272
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2027)
        unique_id: sg_yearly_pv_generation_2027
        device_address: !secret sungrow_modbus_slave
        address: 6273 # reg 6274
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2028)
        unique_id: sg_yearly_pv_generation_2028
        device_address: !secret sungrow_modbus_slave
        address: 6275 # reg 6276
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2029)
        unique_id: sg_yearly_pv_generation_2029
        device_address: !secret sungrow_modbus_slave
        address: 6277 # reg 6278
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600
      # End yearly pv generation

      # Start monthly export
      - name: Monthly export (01 January)
        unique_id: sg_monthly_export_01_january
        device_address: !secret sungrow_modbus_slave
        address: 6595 # reg 6596
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (02 February)
        unique_id: sg_monthly_export_02_february
        device_address: !secret sungrow_modbus_slave
        address: 6596 # reg 6597
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (03 March)
        unique_id: sg_monthly_export_03_march
        device_address: !secret sungrow_modbus_slave
        address: 6597 # reg 6598
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (04 April)
        unique_id: sg_monthly_export_04_april
        device_address: !secret sungrow_modbus_slave
        address: 6598 # reg 6599
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (05 May)
        unique_id: sg_monthly_export_05_may
        device_address: !secret sungrow_modbus_slave
        address: 6599 # reg 6600
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (06 June)
        unique_id: sg_monthly_export_06_june
        device_address: !secret sungrow_modbus_slave
        address: 6600 # reg 6601
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (07 July)
        unique_id: sg_monthly_export_07_july
        device_address: !secret sungrow_modbus_slave
        address: 6601 # reg 6602
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (08 August)
        unique_id: sg_monthly_export_08_august
        device_address: !secret sungrow_modbus_slave
        address: 6602 # reg 6603
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (09 September)
        unique_id: sg_monthly_export_09_september
        device_address: !secret sungrow_modbus_slave
        address: 6603 # reg 6604
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (10 October)
        unique_id: sg_monthly_export_10_october
        device_address: !secret sungrow_modbus_slave
        address: 6604 # reg 6605
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (11 November)
        unique_id: sg_monthly_export_11_november
        device_address: !secret sungrow_modbus_slave
        address: 6605 # reg 6606
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (12 December)
        unique_id: sg_monthly_export_12_december
        device_address: !secret sungrow_modbus_slave
        address: 6606 # reg 6607
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600
      # End monthly export

      # Start yearly export energy from PV
      - name: Yearly Export (2019)
        unique_id: sg_yearly_export_2019
        device_address: !secret sungrow_modbus_slave
        address: 6615 # reg 6616
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2020)
        unique_id: sg_yearly_export_2020
        device_address: !secret sungrow_modbus_slave
        address: 6617 # reg 6618
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2021)
        unique_id: sg_yearly_export_2021
        device_address: !secret sungrow_modbus_slave
        address: 6619 # reg 6620
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2022)
        unique_id: sg_yearly_export_2022
        device_address: !secret sungrow_modbus_slave
        address: 6621 # reg 6622
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2023)
        unique_id: sg_yearly_export_2023
        device_address: !secret sungrow_modbus_slave
        address: 6623 # reg 6624
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2024)
        unique_id: sg_yearly_export_2024
        device_address: !secret sungrow_modbus_slave
        address: 6625 # reg 6626
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2025)
        unique_id: sg_yearly_export_2025
        device_address: !secret sungrow_modbus_slave
        address: 6627 # reg 6628
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2026)
        unique_id: sg_yearly_export_2026
        device_address: !secret sungrow_modbus_slave
        address: 6629 # reg 6630
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2027)
        unique_id: sg_yearly_export_2027
        device_address: !secret sungrow_modbus_slave
        address: 6631 # reg 6632
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2028)
        unique_id: sg_yearly_export_2028
        device_address: !secret sungrow_modbus_slave
        address: 6633 # reg 6634
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600
      # End yearly export energy from PV

      - name: System state
        unique_id: sg_system_state
        device_address: !secret sungrow_modbus_slave
        address: 12999 # reg 13000
        input_type: input
        data_type: uint16
        precision: 0
        scale: 1
        state_class: measurement
        scan_interval: 10

      # register running state is not available for certain SH*RS inverters
      # template sensors are used to determine the states based on other sensors
      - name: Running state
        unique_id: sg_running_state
        device_address: !secret sungrow_modbus_slave
        address: 13000 # reg 13001
        input_type: input
        data_type: uint16
        precision: 0
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Daily PV generation
        unique_id: sg_daily_pv_generation
        device_address: !secret sungrow_modbus_slave
        address: 13001 # reg 13002
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total PV generation
        unique_id: sg_total_pv_generation
        device_address: !secret sungrow_modbus_slave
        address: 13002 # reg 13003
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Daily exported energy from PV
        unique_id: sg_daily_exported_energy_from_PV
        device_address: !secret sungrow_modbus_slave
        address: 13004 # reg 13005
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total exported energy from PV
        unique_id: sg_total_exported_energy_from_pv
        device_address: !secret sungrow_modbus_slave
        address: 13005 # reg 13006
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Load power
        unique_id: sg_load_power
        device_address: !secret sungrow_modbus_slave
        address: 13007 # reg 13008
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      # this value returns a positive value when exporting and a negative value when importing power
      - name: Export power raw
        unique_id: sg_battery_export_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 13009 # reg 13010
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Daily battery charge from PV
        unique_id: sg_daily_battery_charge_from_pv
        device_address: !secret sungrow_modbus_slave
        address: 13011 # reg 13012
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total battery charge from PV
        unique_id: sg_total_battery_charge_from_pv
        device_address: !secret sungrow_modbus_slave
        address: 13012 # reg 13013
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Daily direct energy consumption
        unique_id: sg_daily_direct_energy_consumption
        device_address: !secret sungrow_modbus_slave
        address: 13016 # reg 13017
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total direct energy consumption
        unique_id: sg_total_direct_energy_consumption
        device_address: !secret sungrow_modbus_slave
        address: 13017 # reg 13018
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Battery voltage
        unique_id: sg_battery_voltage
        device_address: !secret sungrow_modbus_slave
        address: 13019 # reg 13020
        input_type: input
        data_type: uint16
        precision: 0
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Battery current
        unique_id: sg_battery_current
        device_address: !secret sungrow_modbus_slave
        address: 13020 # reg 13021
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: A
        state_class: measurement
        device_class: Current
        scale: 0.1
        scan_interval: 10

      # always positive battery power
      # use binary_sensor.battery_charging | discharging to retrieve the direction of the energy flow
      - name: Battery power raw
        unique_id: sg_battery_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 13021 # reg 13022
        input_type: input
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Battery level
        unique_id: sg_battery_level
        device_address: !secret sungrow_modbus_slave
        address: 13022 # reg 13023
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        scale: 0.1
        scan_interval: 60

      - name: Battery state of health
        unique_id: sg_battery_state_of_health
        device_address: !secret sungrow_modbus_slave
        address: 13023 # reg 13024
        input_type: input
        data_type: uint16
        precision: 0
        unit_of_measurement: "%"
        state_class: measurement
        scale: 0.1
        scan_interval: 600

      - name: Battery temperature
        unique_id: sg_battery_temperature
        device_address: !secret sungrow_modbus_slave
        address: 13024 # reg 13025
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: °C
        device_class: Temperature
        state_class: measurement
        scale: 0.1
        scan_interval: 60

      - name: Daily battery discharge
        unique_id: sg_daily_battery_discharge
        device_address: !secret sungrow_modbus_slave
        address: 13025 # reg 13026
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total battery discharge
        unique_id: sg_total_battery_discharge
        device_address: !secret sungrow_modbus_slave
        address: 13026 # reg 13027
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Phase A current
        unique_id: sg_phase_a_current
        device_address: !secret sungrow_modbus_slave
        address: 13030 # reg 13031
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Phase B current
        unique_id: sg_phase_b_current
        device_address: !secret sungrow_modbus_slave
        address: 13031 # reg 13032
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Phase C current
        unique_id: sg_phase_c_current
        device_address: !secret sungrow_modbus_slave
        address: 13032 # reg 13033
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Total active power
        unique_id: sg_total_active_power
        device_address: !secret sungrow_modbus_slave
        address: 13033 # reg 13034
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Daily imported energy
        unique_id: sg_daily_imported_energy
        device_address: !secret sungrow_modbus_slave
        address: 13035 # reg 13036
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total imported energy
        unique_id: sg_total_imported_energy
        device_address: !secret sungrow_modbus_slave
        address: 13036 # reg 13037
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Daily battery charge
        unique_id: sg_daily_battery_charge
        device_address: !secret sungrow_modbus_slave
        address: 13039 # reg 13040
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total battery charge
        unique_id: sg_total_battery_charge
        device_address: !secret sungrow_modbus_slave
        address: 13040 # reg 13041
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Daily exported energy
        unique_id: sg_daily_exported_energy
        device_address: !secret sungrow_modbus_slave
        address: 13044 # reg 13045
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total exported energy
        unique_id: sg_total_exported_energy
        device_address: !secret sungrow_modbus_slave
        address: 13045 # reg 13046
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      #####################
      # holding registers
      #####################
      - name: Inverter start stop
        unique_id: sg_inverter_start_stop
        device_address: !secret sungrow_modbus_slave
        address: 12999 # reg 13000
        input_type: holding
        data_type: uint16
        precision: 0
        state_class: measurement
        scan_interval: 10

      - name: EMS mode selection raw
        unique_id: sg_ems_mode_selection_raw
        device_address: !secret sungrow_modbus_slave
        address: 13049 # reg 13050
        input_type: holding
        data_type: uint16
        state_class: measurement
        scan_interval: 10

      - name: Battery forced charge discharge cmd raw
        unique_id: sg_battery_forced_charge_discharge_cmd_raw
        device_address: !secret sungrow_modbus_slave
        address: 13050 # reg 13051
        input_type: holding
        data_type: uint16
        precision: 0
        state_class: measurement
        scan_interval: 10

      - name: Battery forced charge discharge power
        unique_id: sg_battery_forced_charge_discharge_power
        device_address: !secret sungrow_modbus_slave
        address: 13051 # reg 13052
        input_type: holding
        data_type: uint16
        precision: 0
        # datasheet says:
        # 0 to 5000 W for SH*K-*
        # 0 to 100 % for SH*.0RT
        # for my SH10RT it is set in Watt, not in %
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scan_interval: 10

      - name: Max SoC
        unique_id: sg_max_soc
        device_address: !secret sungrow_modbus_slave
        address: 13057 # reg 13058
        input_type: holding
        data_type: uint16
        precision: 1
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Min SoC
        unique_id: sg_min_soc
        device_address: !secret sungrow_modbus_slave
        address: 13058 # reg 13059
        input_type: holding
        data_type: uint16
        precision: 1
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Export power limit
        unique_id: sg_export_power_limit
        device_address: !secret sungrow_modbus_slave
        address: 13073 # reg 13074
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: "W"
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Export power limit mode raw
        unique_id: sg_export_power_limit_mode_raw
        device_address: !secret sungrow_modbus_slave
        address: 13086 # reg 13087
        input_type: holding
        data_type: uint16
        precision: 0
        state_class: measurement
        scan_interval: 10

      - name: Reserved SoC for backup
        unique_id: sg_reserved_soc_for_backup
        device_address: !secret sungrow_modbus_slave
        address: 13099 # reg 13100
        input_type: holding
        data_type: uint16
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        scale: 1
        scan_interval: 10

      #undocumented sensors (reverse engineered by some guys of photovoltaikforum.com and forum.iobroker.net )
      - name: Battery max charge power
        unique_id: sg_battery_max_charge_power
        device_address: !secret sungrow_modbus_slave
        address: 33046 # reg 33047
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 10
        scan_interval: 10

      - name: Battery max discharge power
        unique_id: sg_battery_max_discharge_power
        device_address: !secret sungrow_modbus_slave
        address: 33047 # reg 33048
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 10
        scan_interval: 10

      - name: Battery capacity
        unique_id: sg_battery_capacity
        device_address: !secret sungrow_modbus_slave
        address: 33048 # reg 33049
        input_type: holding
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy_storage
        scale: 0.01
        scan_interval: 600

      - name: Battery charging start power
        unique_id: sg_battery_charging_start_power
        device_address: !secret sungrow_modbus_slave
        address: 33148 # reg 33149
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 10
        scan_interval: 10

      - name: Battery discharging start power
        unique_id: sg_battery_discharging_start_power
        device_address: !secret sungrow_modbus_slave
        address: 33149 # reg 33150
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 10
        scan_interval: 10

      - name: Global mpp scan manual raw
        unique_id: sg_global_mpp_scan_manual_raw
        device_address: !secret sungrow_modbus_slave
        address: 30229 # reg 30230
        input_type: holding
        data_type: uint16
        precision: 0
        state_class: measurement
        scan_interval: 10

# 'virtual' template sensors for better readability
template:
  - binary_sensor:
      - name: PV generating
        unique_id: sg_pv_generating
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable') 
          and not is_state('sensor.total_dc_power', 'unavailable') 
          }}
        state: >-
          {% if states('sensor.running_state')|is_number %}
            {# use available sensor running_state #}
            {{ states('sensor.running_state')|int |bitwise_and(0x1) }}
          {% else %} 
            {# workaround for SH*RS inverters without working running_state #}
            {% if states('sensor.total_dc_power')|int > 0 %}
              1
            {% else %} 
              0 
            {% endif %}
          {% endif %}

      - name: PV generating (delay)
        unique_id: sg_pv_generating_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.pv_generating', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.pv_generating') }}"

      - name: Battery charging
        unique_id: sg_battery_charging
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable')
          or
            (   not is_state('sensor.ems_mode_selection_raw', 'unavailable')
            and not is_state('sensor.battery_forced_charge_discharge_cmd_raw', 'unavailable') 
            and not is_state('sensor.battery_power_raw', 'unavailable') 
            and not is_state('sensor.total_dc_power', 'unavailable')
            and not is_state('sensor.load_power', 'unavailable') 
            )
          }}
        state: >-
          {% if states('sensor.running_state')|is_number %}
            {# use available sensor running_state #}
            {% if states('sensor.running_state')|int(default=0)|bitwise_and(0x2) > 0 %}
              on
            {% else %}
              off
            {% endif %}
          {% else %}
            {# workaround for SH*RS inverters without working running_state #}
            {% if (states('sensor.ems_mode_selection') ) == "Forced mode" %}
              {# EMS forced mode #}
              {% if (states('sensor.battery_forced_charge_discharge_cmd') == "Forced charge") %}
                {# in mode Forced charge #}
                {% if (states('sensor.battery_power_raw')|int > 0 ) %}
                  {# power flow from/to battery #}
                  on
                {% else %} 
                  {# no power flow from/to battery #}
                  off
                {% endif %}
              {% else %}
                {# in EMS mode, but not in mode Forced charge #}
                off
              {% endif %}
            {% else %} 
              {# not in EMS forced mode, assuming self consumption mode #}
              {% if states('sensor.total_dc_power')|int > states('sensor.load_power')|int %}
                {# more power generated than consumed. assuming battery charging #}
                on
              {% else %} 
                off
              {% endif %}
            {% endif %}
          {% endif %}

      - name: Battery charging (delay)
        unique_id: sg_battery_charging_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.battery_charging', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.battery_charging') }}"

      - name: Battery discharging
        unique_id: sg_battery_discharging
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable')
          or
            (   not is_state('sensor.ems_mode_selection_raw', 'unavailable')
            and not is_state('sensor.battery_forced_charge_discharge_cmd_raw', 'unavailable')
            and not is_state('sensor.battery_power_raw', 'unavailable')
            and not is_state('sensor.total_dc_power', 'unavailable') 
            and not is_state('sensor.load_power', 'unavailable') 
            )
          }}
        state: >-
          {% if states('sensor.running_state')|is_number %}
            {# use available sensor running_state #}
            {% if states('sensor.running_state')|int(default=0)|bitwise_and(0x4) > 0 %}
              on
            {% else %}
              off
            {% endif %}
          {% else %}
            {# workaround for SH*RS inverters without working running_state #}
            {% if (states('sensor.ems_mode_selection') ) == "Forced mode" %}
              {# EMS forced mode #}
              {% if (states('sensor.battery_forced_charge_discharge_cmd') == "Forced discharge") %}
                {# in mode Forced discharge #}
                {% if (states('sensor.battery_power_raw')|int > 0 ) %}
                  {# power flow from/to battery #}
                  on
                {% else %} 
                  {# no power flow from/to battery #}
                  off
                {% endif %}
              {% else %} 
                {# in EMS mode, but not in mode Forced charge #}
                off
              {% endif %}
            {% else %} 
              {# not in EMS forced mode, assuming self consumption mode #}
              {% if ( ( states('sensor.total_dc_power')|int < states('sensor.load_power')|int ) ) and states('sensor.battery_power_raw')|int > 0 %}
                {# more power consumed than generated and some battery power --> assuming battery discharging #}
                on
              {% else %} 
                off
              {% endif %}
            {% endif %}
          {% endif %}

      - name: Battery discharging (delay)
        unique_id: sg_battery_discharging_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.battery_discharging', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.battery_discharging') }}"

      - name: Exporting power
        unique_id: sg_exporting_power
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable') 
          and not is_state('sensor.export_power_raw', 'unavailable') 
          }}
        state: >-
          {% if states('sensor.running_state')|is_number %}
            {# use available sensor running_state #}
            {{ states('sensor.running_state')|int(default=0)|bitwise_and(0x10) > 0 }}
          {% else %} 
            {# workaround for SH*RS inverters without working running_state #}
            {% if states('sensor.export_power_raw')|int > 0 %}
              1
            {% else %} 
              0 
            {% endif %}
          {% endif %}

      - name: Exporting power (delay)
        unique_id: sg_exporting_power_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.exporting_power', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.exporting_power') }}"

      - name: Importing power
        unique_id: sg_importing_power
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable') 
          and not is_state('sensor.running_state', 'unavailable')
          }}
        state: >-
          {% if states('sensor.running_state')|is_number %}
            {# use available sensor running_state #}
            {{ states('sensor.running_state')|int(default=0)|bitwise_and(0x20) > 0 }}
          {% else %} 
            {# workaround for SH*RS inverters without working running_state #}
            {% if states('sensor.export_power_raw')|int < 0 %}
              1
            {% else %}
              0
            {% endif %}
          {% endif %}

      - name: Importing power (delay)
        unique_id: sg_importing_power_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.importing_power', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.importing_power') }}"

  - sensor:
      - name: MPPT1 power
        unique_id: sg_mppt1_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.mppt1_voltage', 'unavailable') 
          and not is_state('sensor.mppt1_current', 'unavailable') 
          }}
        state: "{{ (states('sensor.mppt1_voltage') | float * states('sensor.mppt1_current') | float) |int }}"

      - name: MPPT2 power
        unique_id: sg_mppt2_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.mppt2_voltage', 'unavailable') 
          and not is_state('sensor.mppt2_current', 'unavailable' ) 
          }}
        state: "{{ (states('sensor.mppt2_voltage') | float * states('sensor.mppt2_current') | float) |int }}"

      - name: Phase A power
        unique_id: sg_phase_a_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.phase_a_voltage', 'unavailable')
          and not is_state('sensor.phase_a_current', 'unavailable')
          }}
        state: "{{ (states('sensor.phase_a_voltage') | float * states('sensor.phase_a_current') | float) |int }}"

      - name: Phase B power
        unique_id: sg_phase_b_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.phase_b_voltage', 'unavailable') 
          and not is_state('sensor.phase_b_current', 'unavailable') 
          }}
        state: "{{ (states('sensor.phase_b_voltage') | float * states('sensor.phase_b_current') | float) |int }}"

      - name: Phase C power
        unique_id: sg_phase_c_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.phase_c_voltage', 'unavailable')
          and not is_state('sensor.phase_c_current', 'unavailable')
          }}
        state: "{{ (states('sensor.phase_c_voltage') | float * states('sensor.phase_c_current') | float) |int }}"

      # template sensor in case the meter is not available (grid is off) and returns 0x7FFFFF
      - name: Meter active power
        unique_id: sg_meter_active_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.meter_active_power_raw', 'unavailable')
          and states('sensor.meter_active_power_raw')|int != 0x7FFFFFFF
          }}
        state: "{{ states('sensor.meter_active_power_raw') }}"

      # template sensor in case the meter is not available (grid is off) and returns 0x7FFFFF
      - name: Meter Phase A active power
        unique_id: sg_meter_phase_a_active_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.meter_phase_a_active_power_raw', 'unavailable')
          and states('sensor.meter_phase_a_active_power_raw')|int != 0x7FFFFFFF
          }}
        state: "{{ states('sensor.meter_phase_a_active_power_raw') }}"

      # template sensor in case the meter is not available (grid is off) and returns 0x7FFFFF
      - name: Meter Phase B active power
        unique_id: sg_meter_phase_b_active_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.meter_phase_b_active_power_raw', 'unavailable') 
          and states('sensor.meter_phase_b_active_power_raw')|int != 0x7FFFFFFF 
          }}
        state: "{{ states('sensor.meter_phase_b_active_power_raw') }}"

      # template sensor in case the meter is not available (grid is off) and returns 0x7FFFFF
      - name: Meter Phase C active power
        unique_id: sg_meter_phase_c_active_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.meter_phase_c_active_power_raw', 'unavailable')
          and states('sensor.meter_phase_c_active_power_raw')|int != 0x7FFFFFFF
          }}
        state: "{{ states('sensor.meter_phase_c_active_power_raw') }}"

      - name: Sungrow inverter state
        unique_id: sg_inverter_state
        # TODO: test state_class with enum
        # state_class: measurement
        device_class: enum
        availability: "{{ not is_state('sensor.system_state', 'unavailable') }}"
        state: >-
          {% if ((states('sensor.system_state') | int(default=0)) == 0x0002) %}
            Stop
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x0008) %}
            Standby
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x0010) %}
            Initial Standby
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x0020) %}
            Startup
          {% elif ((states('sensor.system_state') | int(default=0)) in [0x0000,0x0040]) %}
            Running
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x0100) %}
            Fault
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x0400) %}
            Maintain mode
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x0800) %}
            Forced mode
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x1000) %}
            Off-grid mode
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x2501) %}
            Restarting
          {% elif ((states('sensor.system_state') | int(default=0)) == 0x4000) %}
            External EMS mode
          {% else %}
            Unknown - should not see me!
          {% endif %}

      - name: Sungrow device type
        unique_id: sg_device_type
        availability: "{{ not is_state('sensor.sungrow_device_type_code', 'unavailable') }}"
        # TODO: test state_class with enum
        # state_class: measurement
        device_class: enum
        state: >-
          {% if ((states('sensor.sungrow_device_type_code') | int(default=0))  == 0x0D06) %}
            SH3K6
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D07) %}
            SH4K6
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D09) %}
            SH5K-20  
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D03) %}
            SH5K-V13
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D0A) %}
            SH3K6-30
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D0B) %}
            SH4K6-30
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D0C) %}
            SH5K-30
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D17) %}
            SH3.RS
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D0D) %}
            SH3.6RS
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D18) %}
            SH4.0RS
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D0F) %}
            SH5.0RS
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D10) %}
            SH6.0RS
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D1A) %}
            SH8.0RS
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D1B) %}
            SH10RS
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E00) %}
            SH5.0RT
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E01) %}
            SH6.0RT
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E02) %}
            SH8.0RT
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E03) %}
            SH10RT
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E10) %}
            SH5.0RT-20
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E11) %}
            SH6.0RT-20
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E12) %}
            SH8.0RT-20
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E13) %}
            SH10RT-20
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E0C) %}
            SH5.0RT-V112
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E0D) %}
            SH6.0RT-V112
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E0E) %}
            SH8.0RT-V112
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E0F) %}
            SH10RT-V112
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E08) %}
            SH5.0RT-V122
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E09) %}
            SH6.0RT-V122
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E0A) %}
            SH8.0RT-V122
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0E0B) %}
            SH10RT-V122
          {% elif ((states('sensor.sungrow_device_type_code') | int(default=0)) == 0x0D0E) %}
            SH4.6RS 
          {% else %}
            Unknown device code!
          {% endif %}

      # make the sensor battery_forced_charge_discharge_cmd more human readable
      # Inverter States from modbus reference manual
      # 0xAA forced charge
      # 0xBB forced discharge
      # 0xCC Stop (default)
      - name: Battery forced charge discharge cmd
        unique_id: sg_battery_forced_charge_discharge_cmd
        availability: "{{ not is_state('sensor.battery_forced_charge_discharge_cmd_raw', 'unavailable') }}"
        # TODO: test state_class with enum
        # state_class: measurement
        device_class: enum
        state: >-
          {% if ((states('sensor.battery_forced_charge_discharge_cmd_raw') | int(default=0)) == 0x00AA) %}
            Forced charge
          {% elif ((states('sensor.battery_forced_charge_discharge_cmd_raw') | int(default=0))  == 0x00BB) %}
            Forced discharge
          {% elif ((states('sensor.battery_forced_charge_discharge_cmd_raw') | int(default=0))  == 0x00CC) %}
            Stop (default)
          {% else %}
            Unknown - should not see me!
          {% endif %}

      - name: Export power limit mode
        unique_id: export_power_limit_mode
        availability: "{{ not is_state('sensor.export_power_limit_mode_raw', 'unavailable') }}"
        # TODO: test state_class with enum
        # state_class: measurement
        device_class: enum
        state: >-
          {% if ((states('sensor.export_power_limit_mode_raw') | int(default=0)) == 0x00AA) %}
            Enabled
          {% elif ((states('sensor.export_power_limit_mode_raw') | int(default=0))  == 0x0055) %}
            Disabled
          {% else %}
            Unknown - should not see me!
          {% endif %}

      # make the sensor ems_selection_raw more human readable
      - name: EMS mode selection
        unique_id: sg_ems_mode_selection
        availability: "{{ not is_state('sensor.ems_mode_selection_raw', 'unavailable') }}"
        # TODO: test state_class with enum with enum
        # state_class: measurement
        device_class: enum
        state: >-
          {% if ((states('sensor.ems_mode_selection_raw') | int(default=0)) == 0) %}
            Self-consumption mode (default)
          {% elif ((states('sensor.ems_mode_selection_raw') | int(default=0)) == 2) %}
            Forced mode
          {% elif ((states('sensor.ems_mode_selection_raw') | int(default=0)) == 3) %}
            External EMS
          {% elif ((states('sensor.ems_mode_selection_raw') | int(default=0)) == 4) %}
            VPP
          {% elif ((states('sensor.ems_mode_selection_raw') | int(default=0)) == 8) %}
            MicroGrid
          {% else %}
            Unknown - should not see me!
          {% endif %}

      - name: Signed battery power # positive if charging and negative if discharging
        unique_id: sg_signed_battery_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('binary_sensor.battery_charging', 'unavailable') 
          and not is_state('binary_sensor.battery_discharging', 'unavailable')
          and not is_state('sensor.battery_power_raw', 'unavailable')
          }}
        state: >-
          {% if is_state('binary_sensor.battery_charging', 'on') %}
            {{ (states('sensor.battery_power_raw') | float)}} 
          {% elif is_state('binary_sensor.battery_discharging', 'on') %} 
            {{ (states('sensor.battery_power_raw') | float * -1)}} 
          {% else %} 
            0 
          {% endif %}

      - name: Battery charging power # positive if charging else zero
        unique_id: sg_battery_charging_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('binary_sensor.battery_charging', 'unavailable') 
          and not is_state('sensor.battery_power_raw', 'unavailable')
          }}
        state: >-
          {% if is_state('binary_sensor.battery_charging', 'on') %}
            {{ states('sensor.battery_power_raw') }}
          {% else %}
            0
          {% endif %}

      - name: Battery discharging power # positive if discharging else zero
        unique_id: sg_battery_discharging_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('binary_sensor.battery_discharging', 'unavailable') 
          and not is_state('sensor.battery_power_raw', 'unavailable') 
          }}
        state: >-
          {% if is_state('binary_sensor.battery_discharging', 'on') %}
            {{ states('sensor.battery_power_raw') }}
          {% else %}
            0
          {% endif %}

      - name: Import power # power from grid: positive if importing, else zero
        unique_id: sg_import_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: "{{ not is_state('sensor.export_power_raw', 'unavailable') }}"
        state: >-
          {% if states('sensor.export_power_raw')|int < 0 %}
            {{ states('sensor.export_power_raw')|int *-1 }}
          {% else %}
            0
          {% endif %}

      - name: Export power # power to grid: positive if exporting, else zero
        unique_id: sg_export_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: "{{states('sensor.export_power_raw')|is_number }}"
        state: >-
          {% if states('sensor.export_power_raw')|int > 0 %}
            {{ states('sensor.export_power_raw') }}
          {% else %}
            0
          {% endif %}

      - name: "Monthly PV generation (current)"
        unique_id: sg_monthly_pv_generation_current
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {% set currMonth = 'monthly_pv_generation_' ~ '%0.2d' % now().month ~ '_' ~ now().timestamp() | timestamp_custom('%B') | lower %}
          {{ states('sensor.' ~ currMonth)|is_number }}
        state: >
          {% set currMonth = 'monthly_pv_generation_' ~ '%0.2d' % now().month ~ '_' ~ now().timestamp() | timestamp_custom('%B') | lower %}
          {{ states('sensor.' ~ currMonth) }}

      - name: "Yearly PV generation (current)"
        unique_id: sg_yearly_pv_generation_current
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {% set currYear = 'yearly_pv_generation_' ~ now().year %}
          {{ states('sensor.' ~ currYear)|is_number }}
        state: >
          {% set currYear = 'yearly_pv_generation_' ~ now().year %}
          {{ states('sensor.' ~ currYear) }}

      - name: "Monthly export (current)"
        unique_id: sg_monthly_export_current
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {% set currMonth = 'monthly_export_' ~ '%0.2d' % now().month ~ '_' ~ now().timestamp() | timestamp_custom('%B') | lower %}
          {{ states('sensor.' ~ currMonth)|is_number }}
        state: >
          {% set currMonth = 'monthly_export_' ~ '%0.2d' % now().month ~ '_' ~ now().timestamp() | timestamp_custom('%B') | lower %}
          {{ states('sensor.' ~ currMonth) }}

      - name: "Yearly export (current)"
        unique_id: sg_yearly_export_current
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {% set currYear = 'yearly_export_' ~ now().year %}
          {{ states('sensor.' ~ currYear)|is_number }}
        state: >
          {% set currYear = 'yearly_export_' ~ now().year %}
          {{ states('sensor.' ~ currYear) }}

      - name: "Battery level (nominal)"
        unique_id: sg_battery_level_nom
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.battery_level', 'unavailable') 
          and not is_state('sensor.min_soc', 'unavailable') 
          and not is_state('sensor.max_soc', 'unavailable') 
          }}
        state: >-
          {% set soc_min = states('sensor.min_soc') | float %}
          {% set soc_max = states('sensor.max_soc') | float %}
          {% set soc_cur = states('sensor.battery_level') | float %}
          {{
            ((soc_min) + ((soc_max - soc_min) * (soc_cur / 100))) | round(1)
          }}

      - name: "Battery charge (nominal)"
        unique_id: sg_battery_charge_nom
        unit_of_measurement: kWh
        device_class: energy_storage
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.battery_capacity', 'unavailable')
          and not is_state('sensor.battery_level_nominal', 'unavailable')
          }}
        state: >-
          {{
            ( states('sensor.battery_capacity') | float *
            states('sensor.battery_level_nominal') | float / 100 )| round(1)
          }}

      - name: "Battery charge"
        unique_id: sg_battery_charge
        unit_of_measurement: kWh
        device_class: energy_storage
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.battery_capacity', 'unavailable') 
          and not is_state('sensor.battery_level', 'unavailable') 
          and not is_state('sensor.min_soc', 'unavailable') 
          and not is_state('sensor.max_soc', 'unavailable') 
          }}
        state: >-
          {{ 
            ( states('sensor.battery_capacity')|float 
            * ( states('sensor.max_soc')|float - states('sensor.min_soc')|float ) /100 
            * states('sensor.battery_level')|float /100 
            ) |round(2)
          }}

      - name: Daily consumed energy
        unique_id: uid_daily_consumed_energy
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {{ 
          not is_state('sensor.daily_pv_generation', 'unavailable') 
          and not is_state('sensor.daily_exported_energy', 'unavailable') 
          and not is_state('sensor.daily_imported_energy', 'unavailable') 
          and not is_state('sensor.daily_battery_charge', 'unavailable') 
          and not is_state('sensor.daily_battery_discharge', 'unavailable') 
          }}
        state: >-
          {{ 
            (
              states('sensor.daily_pv_generation')|float 
              - states('sensor.daily_exported_energy')|float 
              + states('sensor.daily_imported_energy')|float 
              - states('sensor.daily_battery_charge')|float 
              + states('sensor.daily_battery_discharge')|float
            )|int 
          }}

      - name: Total consumed energy
        unique_id: uid_total_consumed_energy
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        availability: >-
          {{ 
          not is_state('sensor.total_pv_generation', 'unavailable') 
          and not is_state('sensor.total_exported_energy', 'unavailable') 
          and not is_state('sensor.total_imported_energy', 'unavailable') 
          and not is_state('sensor.total_battery_charge', 'unavailable') 
          and not is_state('sensor.total_battery_discharge', 'unavailable') 
          }}
        state: >-
          {{ 
            (
              states('sensor.total_pv_generation')|float 
              - states('sensor.total_exported_energy')|float 
              + states('sensor.total_imported_energy')|float 
              - states('sensor.total_battery_charge')|float 
              + states('sensor.total_battery_discharge')|float
            )|int 
          }}

# getting input for Min and Max SoC
input_number:
  set_sg_min_soc:
    name: Set min SoC
    min: 0
    max: 50
    step: 1

  set_sg_max_soc:
    name: Set max SoC
    min: 50
    max: 100
    step: 1

  set_sg_reserved_soc_for_backup:
    name: Set reserved SoC for backup
    min: 0
    max: 100
    step: 1

  set_sg_forced_charge_discharge_power:
    name: Set forced charge discharge power in W
    min: 0
    max: 5000 # change this value according to the capability of your battery
    step: 100

  set_sg_battery_max_charge_power:
    name: Set max battery charge power in W
    min: 100
    max: 5000 # change this value according to the capability of your battery
    step: 100

  set_sg_battery_max_discharge_power:
    name: Set max battery discharge power in W
    min: 100
    max: 5000 # change this value according to the capability of your battery
    step: 100

  set_sg_battery_charging_start_power:
    name: Set battery charging start power in W
    min: 0
    max: 1000
    step: 10

  set_sg_battery_discharging_start_power:
    name: Set battery discharging start power in W
    min: 0
    max: 1000
    step: 10

  set_sg_export_power_limit:
    name: Set export power limit
    min: 0
    max: 10500 # Note: max for SH10.RT. It would be ncie to have this as a global variable /secret
    step: 100

input_select:
  set_sg_inverter_run_mode:
    name: Inverter mode
    options:
      - "Enabled"
      - "Shutdown"

  # get input for battery mode (forced charge/discharge, stop (default) )
  set_sg_ems_mode:
    name: EMS mode
    options:
      - "Self-consumption mode (default)"
      - "Forced mode"
      - "External EMS" # required for multiple inverters main /follower?
    # these are commented, because they are rarely used
    #      - "VPP"
    #      - "MicroGrid"
    icon: mdi:battery-unknown

  set_sg_battery_forced_charge_discharge_cmd:
    name: Battery forced charge discharge cmd
    options:
      - "Stop (default)"
      - "Forced charge"
      - "Forced discharge"
    icon: mdi:battery-unknown

  set_sg_export_power_limit_mode:
    name: Export power limit mode
    options:
      - "Enabled"
      - "Disabled"
    icon: mdi:export

  set_sg_global_mpp_scan_manual:
    name: Global mpp scan manual
    options:
      - "Enabled"
      - "Disabled"
    icon: mdi:export

# Automations: Write modbus registers on input changes via GUI
# note: If you change a value by the sliders, it will take up to 60 seconds until the state variables are updated
# Unfortunately, I could not find a way to "force update" modbus registers, yet...
automation:
  - id: "automation_sungrow_inverter_state"
    alias: "sungrow inverter state"
    description: "Enables/ stops the inverter"
    trigger:
      - platform: state
        entity_id:
          - input_select.set_sg_inverter_run_mode
    condition: []
    variables:
      sg_start: 0xCF
      sg_stop: 0xCE
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 12999 # reg 13000
          value: >
            {% if is_state('input_select.set_sg_inverter_run_mode', "Enabled") %}
              {{sg_start}}
            {% else %}
              {{sg_stop}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_state_input_selector_update"
    alias: "sungrow inverter enable/ stop input selector update"
    description: "Updates enable/ stops input selector"
    trigger:
      - platform: state
        entity_id:
          - sensor.sungrow_inverter_state
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.sungrow_inverter_state', 'unavailable') }}"
    action:
      - service: input_select.select_option
        target:
          entity_id: input_select.set_sg_inverter_run_mode
        data:
          option: >
            {% if is_state('sensor.sungrow_inverter_state', "Stop") %}
              Shutdown
            {% else %}
              Enabled
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_update_max_soc"
    alias: "sungrow inverter update max SoC"
    description: "Updates Sungrow max Soc holding register"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_max_soc
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13057 # reg 13058
          value: "{{ states('input_number.set_sg_max_soc') | int *10}}"
    mode: single

  - id: "automation_sungrow_inverter_update_max_soc_input_slider_update"
    alias: "sungrow inverter max SoC input slider update"
    description: "Updates Sungrow max Soc input slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.max_soc
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_max_soc
        data:
          value: "{{ states('sensor.max_soc') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_min_soc"
    alias: "sungrow inverter update min SoC"
    description: "Updates Sungrow min Soc holding register"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_min_soc
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13058 # reg 13059
          value: "{{ states('input_number.set_sg_min_soc') | int *10}}"
    mode: single

  - id: "automation_sungrow_inverter_update_min_soc_input_slider_update"
    alias: "sungrow inverter min SoC input slider update"
    description: "Updates Sungrow min Soc input slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.min_soc
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_min_soc
        data:
          value: "{{ states('sensor.min_soc') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_reserved_soc_for_backup"
    alias: "sungrow inverter update reserved soc for backup"
    description: "Updates reserved SoC for backup register"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_reserved_soc_for_backup
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13099 # reg 13100
          value: "{{ states('input_number.set_sg_reserved_soc_for_backup') | int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_reserved_backup_soc_input_slider_update"
    alias: "sungrow inverter reserved backup SoC input slider update"
    description: "Updates Sungrow reserved backup Soc input slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.reserved_soc_for_backup
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_reserved_soc_for_backup
        data:
          value: "{{ states('sensor.reserved_soc_for_backup') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_forced_charge_discharge_cmd"
    alias: "sungrow inverter update battery forced charge discharge cmd"
    description: "Updates Sungrow holding register for battery forced charge discharge command"
    trigger:
      - platform: state
        entity_id:
          - input_select.set_sg_battery_forced_charge_discharge_cmd
    condition: []
    variables:
      ems_forced_charge: 0xAA
      ems_forced_discharge: 0xBB
      ems_stop_default: 0xCC
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13050 # reg 13051
          value: >
            {% if is_state('input_select.set_sg_battery_forced_charge_discharge_cmd', "Stop (default)") %} 
              {{ems_stop_default}}
            {% elif is_state('input_select.set_sg_battery_forced_charge_discharge_cmd', "Forced charge") %} 
              {{ems_forced_charge}}
            {% elif is_state('input_select.set_sg_battery_forced_charge_discharge_cmd', "Forced discharge") %} 
              {{ems_forced_discharge}}
            {% else %}
              {{ems_stop_default}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_update_battery_forced_charge_discharge_cmd_input_select_update"
    alias: "sungrow inverter update battery forced charge discharge cmd input select update"
    description: "Updates Sungrow battery forced charge discharge cmd input select"
    trigger:
      - platform: state
        entity_id:
          - sensor.battery_forced_charge_discharge_cmd
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.battery_forced_charge_discharge_cmd', 'unavailable') }}"
    action:
      - service: input_select.select_option
        target:
          entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
        data:
          option: "{{ states('sensor.battery_forced_charge_discharge_cmd') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_ems_mode"
    alias: "sungrow inverter update EMS mode"
    description: "Updates EMS mode"
    trigger:
      - platform: state
        entity_id:
          - input_select.set_sg_ems_mode
    condition: []
    variables:
      ems_mode_self_consume: 0
      ems_mode_forced: 2
      ems_mode_external: 3
      ems_mode_vpp: 4
      ems_mode_microgrid: 8
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13049 # reg 13050
          value: >
            {% if is_state('input_select.set_sg_ems_mode', "Self-consumption mode (default)") %} 
              {{ems_mode_self_consume}}
            {% elif is_state('input_select.set_sg_ems_mode', "Forced mode") %} 
              {{ems_mode_forced}}
            {% elif is_state('input_select.set_sg_ems_mode', "External EMS") %} 
              {{ems_mode_external}}
            {% elif is_state('input_select.set_sg_ems_mode', "VPP") %} 
              {{ems_mode_vpp}}
            {% elif is_state('input_select.set_sg_ems_mode', "MicroGrid") %} 
              {{ems_mode_microgrid}}
            {% else %} 
              {{ems_mode_self_consume}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_export_power_limit_mode_update"
    alias: "sungrow inverter export power limit mode update"
    description: "Updates Enable/Disable for export power limit mode"
    trigger:
      - platform: state
        entity_id:
          - sensor.export_power_limit_mode_raw
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.export_power_limit_mode_raw', 'unavailable') }}"
    action:
      - service: input_select.select_option
        target:
          entity_id: input_select.set_sg_export_power_limit_mode
        data:
          option: >
            {% if ((states('sensor.export_power_limit_mode_raw') | int(default=0)) == 0x00AA) %} 
              Enabled
            {% elif ((states('sensor.export_power_limit_mode_raw') | int(default=0)) == 0x0055) %} 
              Disabled
            {% endif %}
    mode: single

  - id: "automation_sungrow_export_power_limit_mode"
    alias: "sungrow inverter export power limit mode"
    description: "Set export power limit mode"
    trigger:
      - platform: state
        entity_id:
          - input_select.set_sg_export_power_limit_mode
    condition: []
    variables:
      export_limit_enable: 0xAA
      export_limit_disable: 0x55
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13086 # reg 13087
          value: >
            {% if is_state('input_select.set_sg_export_power_limit_mode', "Enabled") %} 
              {{export_limit_enable}}
            {% elif is_state('input_select.set_sg_export_power_limit_mode', "Disabled") %}
              {{export_limit_disable}}
            {% else %}
              {{export_limit_disable}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_export_power_limit_update"
    alias: "sungrow inverter export power limit update"
    description: "Updates export power limit slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.export_power_limit
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_export_power_limit
        data:
          value: "{{ states('sensor.export_power_limit') }}"
    mode: single

  - id: "automation_sungrow_inverter_set_export_power_limit"
    alias: "sungrow inverter export power limit"
    description: "Sets export power limit"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_export_power_limit
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13073 # reg 13074
          value: "{{ states('input_number.set_sg_export_power_limit') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_ems_mode_input_select_update"
    alias: "sungrow inverter update EMS mode input select update"
    description: "Updates EMS mode input select"
    trigger:
      - platform: state
        entity_id:
          - sensor.ems_mode_selection
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.ems_mode_selection', 'unavailable') }}"
    action:
      - service: input_select.select_option
        target:
          entity_id: input_select.set_sg_ems_mode
        data:
          option: "{{ states('sensor.ems_mode_selection') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_forced_charge_discharge_power"
    alias: "sungrow inverter update battery forced charge discharge power"
    description: "Sets battery forced charge discharge power"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_forced_charge_discharge_power
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13051 # reg 13052
          value: "{{ states('input_number.set_sg_forced_charge_discharge_power') | int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_forced_charge_discharge_power_input_slider_update"
    alias: "sungrow inverter update battery forced charge discharge power input slider update"
    description: "Updates battery forced charge discharge power input slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.battery_forced_charge_discharge_power
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_forced_charge_discharge_power
        data:
          value: "{{ states('sensor.battery_forced_charge_discharge_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_max_charge_power"
    alias: "sungrow inverter update battery max charge power"
    description: "Sets battery max charge power"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_battery_max_charge_power
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33046 # reg 33047
          value: "{{ states('input_number.set_sg_battery_max_charge_power') |float /10 |int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_max_charge_power_input_slider_update"
    alias: "sungrow inverter update battery max charge power input slider update"
    description: "Updates battery max charge power input slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.battery_max_charge_power
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_battery_max_charge_power
        data:
          value: "{{ states('sensor.battery_max_charge_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_max_discharge_power"
    alias: "sungrow inverter update battery max discharge power"
    description: "Sets battery max discharge power"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_battery_max_discharge_power
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33047 # reg 33048
          value: "{{ states('input_number.set_sg_battery_max_discharge_power')  |float /10 |int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_max_discharge_power_input_slider_update"
    alias: "sungrow inverter update battery max discharge power input slider update"
    description: "Updates battery max discharge power input slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.battery_max_discharge_power
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_battery_max_discharge_power
        data:
          value: "{{ states('sensor.battery_max_discharge_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_charging_start_power"
    alias: "sungrow inverter update battery charging start power"
    description: "Sets battery charging start power"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_battery_charging_start_power
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33148 # reg 33149
          value: "{{ states('input_number.set_sg_battery_charging_start_power') |float /10 |int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_charging_start_power_input_slider_update"
    alias: "sungrow inverter update battery charging start power input slider update"
    description: "Updates battery charging start power input slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.battery_charging_start_power
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_battery_charging_start_power
        data:
          value: "{{ states('sensor.battery_charging_start_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_discharging_start_power"
    alias: "sungrow inverter update battery discharging start power"
    description: "Sets battery discharging start power"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_sg_battery_discharging_start_power
    condition: []
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33149 # reg 33150
          value: "{{ states('input_number.set_sg_battery_discharging_start_power') |float /10 | int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_discharging_start_power_input_slider_update"
    alias: "sungrow inverter update battery discharging start power input slider update"
    description: "Updates battery discharging start power input slider"
    trigger:
      - platform: state
        entity_id:
          - sensor.battery_discharging_start_power
    condition: []
    action:
      - service: input_number.set_value
        target:
          entity_id: input_number.set_sg_battery_discharging_start_power
        data:
          value: "{{ states('sensor.battery_discharging_start_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_global_mpp_scan_manual_update"
    alias: "sungrow inverter global mpp scan manual update"
    description: "Updates Enable/Disable for global mpp scan manual"
    trigger:
      - platform: state
        entity_id:
          - sensor.global_mpp_scan_manual_raw
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.global_mpp_scan_manual_raw', 'unavailable') }}"
    action:
      - service: input_select.select_option
        target:
          entity_id: input_select.set_sg_global_mpp_scan_manual
        data:
          option: >
            {% if ((states('sensor.global_mpp_scan_manual_raw') | int(default=0)) == 0x00AA) %} 
              Enabled
            {% elif ((states('sensor.global_mpp_scan_manual_raw') | int(default=0)) == 0x0055) %} 
              Disabled
            {% endif %}
    mode: single

  - id: "automation_sungrow_global_mpp_scan_manual"
    alias: "sungrow inverter global mpp scan manual"
    description: "Set global mpp scan manual"
    trigger:
      - platform: state
        entity_id:
          - input_select.set_sg_global_mpp_scan_manual
    condition: []
    variables:
      export_limit_enable: 0xAA
      export_limit_disable: 0x55
    action:
      - service: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 30229 # reg 30230
          value: >
            {% if is_state('input_select.set_sg_global_mpp_scan_manual', "Enabled") %} 
              {{export_limit_enable}}
            {% elif is_state('input_select.set_sg_global_mpp_scan_manual', "Disabled") %}
              {{export_limit_disable}}
            {% else %}
              {{export_limit_disable}}
            {% endif %}
    mode: single    


# Usage: Use these scripts to simplify automations
# Example (Adjust to your needs with appropriate trigger): 
# automation:
#  - alias: Forced Battery Charging Management
#    description: "Manages forced battery charging during cheapest hours."
#   trigger:
#      - platform: state
#        entity_id: 
#          - binary_sensor.cheapest_hours_for_charging_timer
#    action:
#      - choose:
#          - conditions:
#              - condition: state
#                entity_id: binary_sensor.cheapest_hours_for_charging_timer
#                state: 'on'
#            sequence:
#              - service: script.sg_forced_charge_battery_mode
#          - conditions:
#              - condition: state
#                entity_id: binary_sensor.cheapest_hours_for_charging_timer
#                state: 'off'
#            sequence:
#              - service: script.sg_self_consumption_mode

script:
    sg_set_forced_discharge_battery_mode:
      sequence:
        - service: input_select.select_option
          data:
            entity_id: input_select.set_sg_ems_mode
            option: "Forced mode"
        - service: input_select.select_option
          data:
            entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
            option: "Forced discharge"
        # Uncomment notify service lines below for push notifications to mobile devices
        # - service: notify.notify
        #   data:
        #     title: "Forced Battery Discharge"
        #     message: "Switched to Forced Battery Discharge mode"
          
    sg_set_forced_charge_battery_mode:
        sequence:
          - service: input_select.select_option
            data:
              entity_id: input_select.set_sg_ems_mode
              option: "Forced mode"
          - service: input_select.select_option
            data:
              entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
              option: "Forced charge"
              
    sg_set_battery_bypass_mode:
        sequence:
          - service: input_select.select_option
            data:
              entity_id: input_select.set_sg_ems_mode
              option: "Forced mode"
          - service: input_select.select_option
            data:
              entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
              option: "Stop (default)"
              
    sg_set_self_consumption_mode:
        sequence:
          - service: input_select.select_option
            data:
              entity_id: input_select.set_sg_ems_mode
              option: "Self-consumption mode (default)"
          - service: input_select.select_option
            data:
              entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
              option: "Stop (default)"