Portmapping Not Working After First Reboot/Startup

[geidien]

Portmapping works great on the device if I erase the flash, then reflash firmware to a "new" state. Device then works perfectly and portmap functions as it should. As soon as the device is powered off or rebooted, the portmapping no longer works. I have tried removing and re-adding the portmap using the portmap console line, and even using a different port. But, the device no longer forwards the port.

Any reason as to why portmapping would only work on the first boot?

[Hougaard22]

Port mapping works for me after restart and power off, try flashing the newest binary from master.