Can the Zemismart Tuya Zigbee WiFi 3 Phase Energy Meter be supported?

[vlacemeister]

Hello all! (First time asking something here)

I bought the Zemismart Tuya Zigbee WiFi 3 Phase Energy Meter (https://vi.aliexpress.com/item/1005005879995196.html).

• LocalTuya not installed.
• Only protocol 3.4 works.
• Tuya category: dlq.

When I try do add it to Tuya-Local I get 2 different results, apart from "Unable to connect..." under other protocols.

Sometimes I get the "Sorry, there is no support for this device." message.

Sometimes I get a different set of devices to choose from.

Oddly enough, the day before the release of HA 2024.2 it worked for a while until HA got updated.

Can this model be supported?

Thanks

{
"modelId": "000002yenr",
"services": [{
"actions": [],
"code": "",
"description": "",
"events": [],
"name": "默认服务",
"properties": [{
"abilityId": 1,
"accessMode": "ro",
"code": "total_forward_energy",
"description": "",
"extensions": {
"iconName": "icon-dp_lightning",
"attribute": "128"
},
"name": "累计正向有功电能",
"typeSpec": {
"max": 99999999,
"min": 0,
"scale": 2,
"step": 1,
"type": "value",
"typeDefaultValue": 0,
"unit": "kW·h"
}
}, {
"abilityId": 2,
"accessMode": "ro",
"code": "cur_neutral",
"description": "",
"extensions": {
"iconName": "icon-power1",
"attribute": "128"
},
"name": "累计反向有功电能",
"typeSpec": {
"max": 99999999,
"min": 0,
"scale": 2,
"step": 1,
"type": "value",
"typeDefaultValue": 0,
"unit": "kW.h"
}
}, {
"abilityId": 6,
"accessMode": "ro",
"code": "phase_a",
"description": "1，A相电压，电流及功率\n2，大端模式，HEX格式，共8个字节\n3，单位精度：电压，2字节，单位0.1V。电流，3字节，单位 0.001A 。A相有功功率，3字节，单位0.0001kW\n4，报文格式\n举例：08 80 00 03 E8 00 27 10 表示A相217.6V，A相电流1.000A，A相功率10.000KW\n5，通信逻辑：\n1）用户进面板，主动查询。用户进入面板，面板马上下发0x08到电表，电表上报数据到云平台，面板拿到数据，然后展示。 注：最新WIFI支持。 \n2）电表基于一定周期上报数据。建议：在WIFI模式时，15秒上报一次。NB模式时，1个小时上报一次。",
"extensions": {
"iconName": "icon-dp_lightning",
"attribute": "128"
},
"name": "A相电压，电流及功率",
"typeSpec": {
"maxlen": 128,
"type": "raw"
}
}, {
"abilityId": 7,
"accessMode": "ro",
"code": "phase_b",
"description": "1，B相电压，电流及功率\n2，大端模式，HEX格式，共8个字节\n3，单位精度：电压，2字节，单位0.1V。电流，3字节，单位 0.001A 。B相有功功率，3字节，单位0.0001kW\n4，报文格式\n举例：08 80 00 03 E8 00 27 10 表示B相217.6V，B相电流1.000A，B相功率10.000KW\n5，通信逻辑：\n1）用户进面板，主动查询。用户进入面板，面板马上下发0x00到电表，电表上报数据到云平台，面板拿到数据，然后展示。 \n2）电表基于一定周期上报数据。建议：在WIFI模式时，15秒上报一次。NB模式时，1个小时上报一次。",
"extensions": {
"iconName": "icon-dp_lightning",
"attribute": "128"
},
"name": "B相电压，电流及功率",
"typeSpec": {
"maxlen": 128,
"type": "raw"
}
}, {
"abilityId": 8,
"accessMode": "ro",
"code": "phase_c",
"description": "1，C相电压，电流及功率\n2，大端模式，HEX格式，共8个字节\n3，单位精度：电压，2字节，单位0.1V。电流，3字节，单位 0.001A 。C相有功功率，3字节，单位0.0001kW\n4，报文格式\n举例：08 80 00 03 E8 00 27 10 表示C相217.6V，C相电流1.000A，C相功率10.000KW\n5，通信逻辑：\n1）用户进面板，主动查询。用户进入面板，面板马上下发0x08到电表，电表上报数据到云平台，面板拿到数据，然后展示。 \n2）电表基于一定周期上报数据。建议：在WIFI模式时，15秒上报一次。NB模式时，1个小时上报一次。",
"extensions": {
"iconName": "icon-dp_lightning",
"attribute": "128"
},
"name": "C相电压，电流及功率",
"typeSpec": {
"maxlen": 128,
"type": "raw"
}
}, {
"abilityId": 9,
"accessMode": "ro",
"code": "fault",
"description": "1，告警\n2，大端模式，HEX,4字节\n3，报文格式\n按照完整4个字节,对应的告警位上报告警；bit位，1表示有告警，0表示无告警；如果没用的告警位，补0。高位无定义，也补0；\n举例：0X00 00 00 09,表示当前发生了漏电自检不正常告警和短路告警,无其它告警。\n4，通信逻辑\n只要有1个告警发生，就完整4个字节上报给面板；只要有1个告警关闭，就完整4个字节上报给面板，更新面板显示。",
"extensions": {
"iconName": "icon-baojing",
"attribute": "128"
},
"name": "故障告警",
"typeSpec": {
"label": ["short_circuit_alarm", "surge_alarm", "overload_alarm", "leakagecurr_alarm", "temp_dif_fault", "fire_alarm", "high_power_alarm", "self_test_alarm", "ov_cr", "unbalance_alarm", "ov_vol", "undervoltage_alarm", "miss_phase_alarm", "outage_alarm", "magnetism_alarm", "credit_alarm", "no_balance_alarm"],
"maxlen": 17,
"type": "bitmap",
"typeDefaultValue": 0
}
}, {
"abilityId": 11,
"accessMode": "rw",
"code": "switch_prepayment",
"description": "",
"extensions": {
"iconName": "icon-dp_money",
"attribute": "1152"
},
"name": "预付费功能开关",
"typeSpec": {
"type": "bool",
"typeDefaultValue": false
}
}, {
"abilityId": 12,
"accessMode": "rw",
"code": "clear_energy",
"description": "",
"extensions": {
"iconName": "icon-dp_lightning",
"attribute": "1152"
},
"name": "余额清零",
"typeSpec": {
"type": "bool",
"typeDefaultValue": false
}
}, {
"abilityId": 13,
"accessMode": "ro",
"code": "balance_energy",
"description": "",
"extensions": {
"iconName": "icon-dp_lightning",
"attribute": "1152"
},
"name": "余额",
"typeSpec": {
"max": 99999999,
"min": 0,
"scale": 2,
"step": 1,
"type": "value",
"typeDefaultValue": 0,
"unit": "kW·h"
}
}, {
"abilityId": 14,
"accessMode": "rw",
"code": "charge_energy",
"description": "",
"extensions": {
"iconName": "icon-dp_money",
"attribute": "1152"
},
"name": "电量充值",
"typeSpec": {
"max": 999999,
"min": 0,
"scale": 2,
"step": 1,
"type": "value",
"typeDefaultValue": 0,
"unit": "kW·h"
}
}, {
"abilityId": 17,
"accessMode": "rw",
"code": "alarm_set_1",
"description": "1，告警阈值使能控制及设置2 \n2，HEX格式，大端模式, 总告警的数量*4字节= 设置告警总长度。\n3，报文格式\n每个告警由4个字节组成，第1个字节（表示该告警存在）；第2个字节（发生此告警时，断路器控制模式（0X01拉闸，0X00不动作只告警）；第3、4字节：设置告警阈值\n举例：0X01 01 00 00 03 01 00 14,表示该断路器支持短路告警，发生该告警时，自动跳闸，阀值补0。支持过载告警，发生该告警时，拉闸动作，动作阀值20KW。无其它告警。\n4，通信逻辑\nA，配网成功后，按照上面的格式，主动上报给云平台，面板知道哪些告警是断路器当前支持的。设置不成功，重新配网再上报。\nB，断路器上电时，也上报一次。\nC，面板根据协议下发告警设置。",
"extensions": {
"iconName": "icon-dp_warming",
"attribute": "128"
},
"name": "告警设置1",
"typeSpec": {
"maxlen": 128,
"type": "raw"
}
}, {
"abilityId": 18,
"accessMode": "rw",
"code": "alarm_set_2",
"description": "1，告警阈值使能控制及设置2 \n2，HEX格式，大端模式\n3，报文格式\n每个告警由4个字节组成，第1个字节（表示该告警存在）；第2个字节（发生此告警时，断路器控制模式（0X01拉闸，0X00不动作只告警）；第3、4字节：设置告警阈值\n举例：0X01 01 00 3C 03 01 00 F5,表示该断路器支持过流告警，发生该告警时，拉闸动作，动作阀值60A。支持过压告警，发生该告警时，拉闸动作，动作阀值245V\n4，通信逻辑\nA，配网成功后，按照上面的格式，主动上报给云平台，面板知道哪些告警是断路器当前支持的。设置不成功，重新配网再上报。\nB，断路器上电时，也上报一次。\nC，面板根据协议下发告警设置。",
"extensions": {
"iconName": "icon-dp_warming",
"attribute": "128"
},
"name": "告警设置2",
"typeSpec": {
"maxlen": 128,
"type": "raw"
}
}
]
}
]
}

[make-all]

This should match yagusmart_3pn_energymeter. If not in the current release, in the next release after a compatibility improvement committed today.